For Employers - Post Jobs
Contact Us
Jobs
Companies
Forums
Engineering Jobs in Kulim - August 2026 - Urgent Hiring
Paparan 313 hasil carian kerja kosong untuk
"engineering"
di Kulim
Jangan lepaskan peluang untuk kerja Engineering terkini! di Kulim
Urus Pemberitahuan
Undisclosed
- Assist Engineer to carry out engineering experiment
- Run Epitaxy tool either in remote or local mode.
- Perform measurement and able to verify the data. ...
Posted
a month ago
MST Facilities Sdn Bhd
Undisclosed
- Plan, coordinate and monitor HVAC and M&E projects across Kulim and other assigned sites.
- Provide technical and operational support to site teams covering HVAC, mechanical, electrical and utility systems.
- Coordinate equipment installation, testing, commissioning, system integration and project handover. ...
Posted
8 days ago
MYR4,000 - MYR8,000 Sebulan
- What type of equipment maintaining for? Please list out.
- Bachelor's (Preferred)
- equipment maintenance: 4 years (Preferred) ...
Posted
16 days ago
Maintenance Engineer - Specialist - Senior Specialist Maintenance Engineer - Specialist - Senior Specialist
Versatile Creation Sdn Bhd
MYR7,300 - MYR11,000 Sebulan
- Ensure high equipment availability and minimize production downtime.
- Perform equipment troubleshooting, repair, and preventive maintenance (PM).
- Monitor PM effectiveness and improve equipment reliability. ...
Posted
16 days ago
MST Facilities Sdn Bhd
MYR3,000 - MYR5,000 Sebulan
- Plan, coordinate and monitor HVAC and M&E projects across Kulim and other assigned sites.
- Provide technical and operational support to site teams covering HVAC, mechanical, electrical and utility systems.
- Coordinate equipment installation, testing, commissioning, system integration and project handover. ...
Posted
9 days ago
Undisclosed
- High-Impact Technical Ownership
- Exposure to Advanced Manufacturing Technologies
- Lead and continuously improve the Foreign Material (FM) Management System and contamination control programmes. ...
Posted
17 days ago
MYR5,500 - MYR7,500 Sebulan
- Developing a project master schedule in line with the proposal/project requirements in Primavera P6 software & MS Project.
- Assist in updating and modifying schedules based on revising work sequence.
- Updating and preparing weekly and monthly progress reports for clients. ...
Posted
22 days ago
Undisclosed
- Monitoring and Management of Distribution Network System (LV, 11 kV, 33 kV, 132 kV)
- Switching operation of Distribution System Assets
- Planning the operations of Distribution System Assets ...
Posted
a month ago
Undisclosed
- Develop and lead key wafer function test hardware solutions, including tester-to-prober interfaces, probe interface boards, probe cards, docking hardware, and test head handling concepts
- Translate product, equipment, and manufacturing requirements into robust hardware concepts that support different device technologies, tester platforms, prober models, and production environments
- Contribute to the definition, refinement, and standardization of prober docking solutions for broader usage, with focus on repeatability, planarity control, alignment accuracy, maintainability, safety, and ease of setup ...
Posted
11 days ago
Fujimi- Micro Technology
Undisclosed
- Degree of Engineering in Chemical/Chemistry/Mechanical related field.
- Minimum 1-2 years experience in CMP manufacturing process related.
- Conduct routine checking on TS equipment condition. ...
Posted
12 days ago
Undisclosed
- Development of innovative processes and process characterization methodologies for existing and new technologies.
- Partnering with production module/department, technology integration, planning, business divisions and global process development counter parts in mapping and enabling future technologies.
- Perform process stability, sustaining and improvement to meet overall company targets ...
Posted
13 days ago
Undisclosed
- Owner of yield: Continuously report and track yield progress against roadmap with all function. Owner of the yield roadmap: rolling 12 months and be accountable that the Front End/ Back End achieve those yield targets.
- Define/drive yield improvements: analyse yield detractors to the root causes, drive improvements with respective process integration and process owners
- Owner of systems and data: Define systems and data required for yield performance, ensure quick identification of issues and root causes, kill ratio analysis and yield improvement methodologies. Owner of product performance / spec: Safeguard product requirements and performance, technical ownership for testing, probing, AVI, etc., owner of product master data. ...
Posted
19 days ago
Undisclosed
- Designs the software to automate the testing of a product.
- Interfaces with database for data collection and data processing.
- Works closely with the MPE and MES (Mechanical Execution System) Engineers for automation and testing to improve productivity and quality. ...
Posted
24 days ago
Infineon Technologies
Undisclosed
- Define test concepts and perform test simulations to ensure the robustness of the test solution
- Design test hardware for automated test equipment (ATE)
- Code and debug test programs ...
Posted
20 days ago
Undisclosed
- Develop and maintain data pipelines integrating manufacturing systems
- Build dashboards and reports to monitor production KPIs and support data-driven decision-making.
- Analyze manufacturing data to identify trends, improve efficiency, and optimize processes. ...
Posted
a month ago
Undisclosed
- ams OSRAM is seeking a seasoned Test Engineering professional in Malaysia to lead R&D collaboration, tool qualification, and process improvements in front-end testing. You will drive continuous improvement, ensure tool readiness, and partner with sustaining engineering to optimize yield and efficiency.
- The role requires strong skills in risk management, OCAP development, and maintenance planning to maximize uptime and process stability in a high-tech manufacturing environment.
Posted
2 days ago
Undisclosed
- Responsible for setup of unit process development for both new and refurbished tools to achieve cost target with high quality in timely manner.
- Responsible for setup of unit process for new transfer technologies to ensure successful qualification, yield learning and production ramp.
- Assessment of process changes and process change management ...
Posted
a month ago
Undisclosed
- Develop innovative test methods including DfT and optimize test software for the ATE (Automated Test Equipment)
- Design product specific test hardware for wafer and final test
- Analyze, debug and characterize new products on the test system ...
Posted
a month ago
Undisclosed
- R&D Collaboration & Tool Qualification. Partner with R&D teams to support probing and testing tool qualification. Evaluate new test methods, tools, and technologies to ensure readiness for production. Provide technical feedback to improve test coverage, accuracy, and efficiency.
- Sustaining & Process Improvement. Work closely with sustaining engineering teams on maintenance strategies and process-related issues. Drive continuous improvement initiatives to enhance yield, quality, and test efficiency. Troubleshoot test-related issues and implement corrective/preventive actions.
- Risk Management & Process Control. Conduct risk assessments for test processes and equipment. Develop and maintain Control Plans to ensure process stability. Create and implement OCAP (Out of Control Action Plans). Prepare and maintain detailed Work Instructions for test operations. ...
Posted
18 days ago
Undisclosed
- Full responsibility of equipment performance uptime. Define maintenance procedures and perform equipment maintenance to keep up and sustain machine basic condition.
- To set-up SAP PM, maintenance work instructions TWI for responsible area. To achieve equipment key KPIs and supporting process engineering and operations teams to achieve process stability, output, process CpK and yield.
- Sustain equipment performance, daily monitoring all machine parameters and addressing Perform troubleshooting on tool's software and hardware part with application of in situ measurement systems. ...
Posted
19 days ago
Facility Specialist Engineer (Clean Room Management) Facility Specialist Engineer (Clean Room Management)
Versatile Creation Sdn Bhd
MYR4,000 - MYR8,000 Sebulan
- Monitor and manage cleanroom contamination control and APC performance.
- Investigate and resolve OOC/OOS events and engineering issues.
- Support facility projects, equipment qualification, and expansion activities. ...
Posted
19 days ago
Undisclosed
- Support NPD, Global Footprint, and Supply Chain projects to evaluate/audit new suppliers.
- Lead supplier evaluation/audits of current suppliers.
- Deploy company' requirements to suppliers, identify gaps, and work with suppliers to develop the capability to meet expectations. ...
Posted
24 days ago
Infineon Technologies
Undisclosed
- Initiate/lead yield/Inline/PCM/DD and quality improvement programs
- Lots’ assessment & disposition to ensure quality of products delivered to customers meet Infineon’s quality and reliability standard
- Investigate, identify and provide fast feedback to production line incase of PCM/Inline/DD trend deviation/drift ...
Posted
24 days ago
Infineon Technologies
Undisclosed
- Support development of new GaN devices and technology architectures based on customers and company needs.
- Define design rules & test methodologies.
- Take ownership on assigned development packages ...
Posted
25 days ago
MYR5,000 - MYR12,000 Sebulan
- Which industry working experience do you have? (Eg. wafer fabrication/ ICs/ PCBA...) Please list out.
- What type of metrology equipment do you have experience with? Please list out.
- Bachelor's (Preferred) ...
Posted
11 days ago
MYR1,800 - MYR2,300 Sebulan
- CNC Machine Operation: Operate and set up CNC machines according to production requirements while ensuring machines run smoothly and efficiently.
- Machine Maintenance & Troubleshooting: Perform routine machine maintenance, update maintenance records, and assist in troubleshooting machine issues when necessary.
- Quality Inspection: Check raw materials and finished products through visual and measurement inspections to ensure they meet quality requirements. ...
Posted
12 days ago
MYR5,000 - MYR11,000 Sebulan
- Develop and optimize SRSF processes, including:
- Solder Resist (SR) Lamination
- SR Exposure ...
Posted
9 days ago
Undisclosed
- Great opportunity for growth
- Attractive package and benefits
- Lead the development, optimisation, and standardisation of manufacturing processes for new product introductions. ...
Posted
a month ago
Undisclosed
- Perform part assembly and fitting of components
- Carry out deburring, sanding, and polishing to meet finishing standards
- Clean and pack finished goods ...
Posted
2 days ago
Undisclosed
- Operate CNC turning or milling machines according to instructions and specifications
- Perform setup, tool changes, offsets, and adjustments to ensure accurate machining
- Read and interpret technical drawings and work instructions ...
Posted
2 days ago
Job searches related to “Engineering”
Cari Syarikat:
Papar Lebih Syarikat
Cari Kerja "engineering" Berdasarkan:
Cari Kerja "engineering" Berdasarkan:
Semua Industri