1,700+ Engineering Jobs - September 2026 - Urgent Hiring
Showing 1,710 jobs results for
"engineering"
MYR4,000 - MYR7,000 Per Month
Fresh Graduates
Near Train Station
- Job Responsibilities
- CNC Machine Setup & Operation
- Operate CNC milling machines to perform machining processes with high precision ...
Be an early applicant!
Posted
6 days ago
Junior Service Engineer / Technician
MYR3,000 - MYR3,500 Per Month
Fresh Graduates
Near Train Station
- Responsible for delivery, installation, and testing & commissioning of optical/medical device.
- Perform preventive maintenance service according to the schedule.
- Machine preparation prior to delivery. ...
Be an early applicant!
Posted
2 hours ago
Up to MYR4,500 Per Month
Near Train Station
- Set up and operate CNC milling and CNC lathe machines.
- Prepare tools, clamp workpieces and set machine work origins according to technical drawings.
- Load, edit and optimize CNC programs using G-code and M-code. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- To establish build sequence and production workflow.2. To create Work Instruction of the required process in the production floor.3. To assess the required jig, fixture and tools.4. To create PFMEA, control plan and risk assesment.5. Provide inputs and support IE to optimize production layout.6. To provide solutions and support for quality issue affecting production deliveries.7. To liaise with engineering, material, PM and MIS on BOM/ drawing/design changes/issues.8. To enchance processing techniques and methods applied in production floor.9. Drive and develop new process improvements to reduce cost and increase productivity.10. To provide training to production staff on the process, work instruction and improvement implementation to the production floor.11. Analysis of production data for productivity improvement.12. To lead/guide/train Process Engineer level 1,2, 3 on process engineering and line improvement.13. To comply with all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to general safety practices, standard operating procedure, work instructions, policies and guidelines provided by the company.14. Other duties and assignments as instructed by superiors from time to time.
Be an early applicant!
Posted
5 hours ago
Undisclosed
- Complete mechanical assembly/electrical assembly with guidance by the senior technician, team leader, supervisor and/or engineering, installation and testing of equipment to time deadlines.2. Assemble and integrate a variety of mechanical and electrical assemblies. 3. Obtain and verify kitted (pre-picked) details parts and assemblies were issued correctly by comparing part numbers and quantities to drawing(s).4. Follow oral/written instructions provided by the senior technician, team leader, supervisor and/or engineering to complete assembly tasks.5. Ensure that parts issued are free of visible defects.6. Check work after completion of each operation in job and/or completed job to ensure assembly is complete per drawing, that there are no defects and that the work area is clean.7. Travel to customer sites and carry out installation, servicing work and training as scheduled.8. Other duties and assignments as instructed by superiors from time to time.9. Perform On Site Customer support assign by the Superior or the management.10. To comply to all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to general safety practices, standard operating procedure, work instructions, policies and guidelines provided by the company.
Be an early applicant!
Posted
5 hours ago
Marketing & Engineering
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Review customer engineering drawings, specifications and requirements for quotation purposes.
- Understand machining processes such as CNC milling, CNC turning and conventional machining.
- Evaluate drawing requirements including material, dimensions, tolerances, surface finish and special requirements. ...
Be an early applicant!
Posted
a day ago
Undisclosed
- Monitor day-to-day inspection operations on vendors supplied products.
- To liaise with the incoming inspection team and buyer on supplier quality issues.
- Supplier quality performance monitoring, evaluation & drive for improvement. ...
Be an early applicant!
Posted
5 hours ago
MYR2,000 - MYR5,000 Per Month
- • 协助机械设计及绘制技术图纸• 操作手动／传统铣床• 阅读及理解基本机械图纸• 按照要求进行加工及制作• 确保工作质量、准确度及安全• 负责机器、工具及工作区域的日常维护• 配合团队完成主管安排的工作
Be an early applicant!
Posted
5 hours ago
MYR2,500 - MYR3,200 Per Month
Fresh Graduates
- Conduct site visits, surveys, and client meetings to assess project requirements.
- Prepare and coordinate cranes and lifting equipment for site operations.
- Develop lifting plan proposals in compliance with safety and project specifications. ...
Be an early applicant!
Posted
11 days ago
MYR2,000 - MYR2,500 Per Month
- Service Evaporative Air Cooler.
- Maintenance of Evaporative Air Cooler.
- Repair Evaporative Air Cooler. ...
Be an early applicant!
Posted
6 days ago
MYR2,000 - MYR2,500 Per Month
- Service Evaporative Air Cooler.
- Maintenance of Evaporative Air Cooler.
- Repair Evaporative Air Cooler. ...
Be an early applicant!
Posted
6 days ago
MYR2,000 - MYR2,500 Per Month
- Service Evaporative Air Cooler.
- Maintenance of Evaporative Air Cooler.
- Repair Evaporative Air Cooler. ...
Be an early applicant!
Posted
6 days ago
MYR2,000 - MYR2,500 Per Month
- Service Evaporative Air Cooler.
- Maintenance of Evaporative Air Cooler.
- Repair Evaporative Air Cooler. ...
Be an early applicant!
Posted
6 days ago
MYR2,000 - MYR2,500 Per Month
- Service Evaporative Air Cooler.
- Maintenance of Evaporative Air Cooler.
- Repair Evaporative Air Cooler. ...
Be an early applicant!
Posted
6 days ago
SGD2,000 - SGD2,500 Per Month
Sembawang (NS11), Sembawang (NS11)
- Perform mechanical and electrical assembly of modules and components for automation equipment and machinery.
- Prepare cables, assemble control panels, and perform electrical wiring and routing.
- Carry out machine calibration, I/O checks, testing and troubleshooting. ...
Be an early applicant!
Posted
18 days ago
SGD1,900 - SGD2,200 Per Month
Gul Circle (EW30), Gul Circle (EW30)
- Perform repair and preventive maintenance on factory machinery and equipment.
- Dismantle and assemble mechanical machinery and components when required.
- Inspect equipment and identify mechanical faults or abnormalities. ...
Be an early applicant!
Posted
18 days ago
MYR2,000 - MYR3,000 Per Month
- Install EV chargers at residential, commercial, and public locations.
- Perform testing and commissioning of EV chargers to ensure proper functionality.
- Troubleshoot and resolve any issues that arise during installation. ...
Posted
7 days ago
MYR2,000 - MYR3,000 Per Month
George Town, Pulau Pinang
- Install EV chargers at residential, commercial, and public locations.
- Perform testing and commissioning of EV chargers to ensure proper functionality.
- Troubleshoot and resolve any issues that arise during installation. ...
Posted
7 days ago
MYR2,500 - MYR3,000 Per Month
- Dismantle, repair, and re-install plant machinery and pumps.
- Perform pump fitting, repacking, seal replacement, and drive realignment.
- Carry out regular preventive maintenance and troubleshooting on site. ...
Be an early applicant!
Posted
a month ago
MYR10,212 - MYR10,213 Per Month
KL City, WP Kuala Lumpur
Near Train Station
- Set up, operate and maintain video systems for onboard entertainment venues and assigned shows.
- Film and edit daily programmes, port talks, enrichment lectures and other onboard video content.
- Programme the show-control computer during technical rehearsals. ...
Be an early applicant!
Posted
18 days ago
MYR4,000 - MYR6,000 Per Month
- Coordinate, provide technical briefings, supervise, inspect, and oversee the acceptance of cleanroom interior fit-out works throughout the construction process.
- Ensure cleanroom envelope systems meet requirements for cleanliness, airtightness, ESD protection, and process functionality.
- Monitor site progress and ensure construction works are carried out according to approved drawings, specifications, quality standards, and project schedules.Cleanroom Partition & Ceiling Systems ...
Be an early applicant!
Posted
25 days ago
Up to MYR2,000 Per Month
Fresh Graduates
- In charge of light fixtures, electrical switch boards and electrical meters, screw air compressors and gauss strength checking based on routine schedules.
- In charge of planning maintenance and servicing for electrical switchboards during Mill stoppages.
- To assist Maintenance Fitter to dismantle the faulty electric motors, send it for rewinding and reassembling after repairs. ...
Be an early applicant!
Posted
a month ago
Up to MYR2,000 Per Month
Fresh Graduates
- In charge of light fixtures, electrical switch boards and electrical meters, screw air compressors and gauss strength checking based on routine schedules.
- In charge of planning maintenance and servicing for electrical switchboards during Mill stoppages.
- To assist Maintenance Fitter to dismantle the faulty electric motors, send it for rewinding and reassembling after repairs. ...
Be an early applicant!
Posted
a month ago
Up to MYR2,000 Per Month
Fresh Graduates
- In charge of light fixtures, electrical switch boards and electrical meters, screw air compressors and gauss strength checking based on routine schedules.
- In charge of planning maintenance and servicing for electrical switchboards during Mill stoppages.
- To assist Maintenance Fitter to dismantle the faulty electric motors, send it for rewinding and reassembling after repairs. ...
Be an early applicant!
Posted
a month ago
Up to MYR2,500 Per Month
Tebrau, Johor
- Assist technicians with daily technical and maintenance tasks.
- Perform basic troubleshooting and repair work.
- Assist with equipment installation, inspection and maintenance. ...
Be an early applicant!
Posted
a day ago
Up to MYR2,000 Per Month
Fresh Graduates
- In charge of light fixtures, electrical switch boards and electrical meters, screw air compressors and gauss strength checking based on routine schedules.
- In charge of planning maintenance and servicing for electrical switchboards during Mill stoppages.
- To assist Maintenance Fitter to dismantle the faulty electric motors, send it for rewinding and reassembling after repairs. ...
Be an early applicant!
Posted
a month ago
Up to MYR2,000 Per Month
Fresh Graduates
- In charge of light fixtures, electrical switch boards and electrical meters, screw air compressors and gauss strength checking based on routine schedules.
- In charge of planning maintenance and servicing for electrical switchboards during Mill stoppages.
- To assist Maintenance Fitter to dismantle the faulty electric motors, send it for rewinding and reassembling after repairs. ...
Be an early applicant!
Posted
a month ago
MYR2,800 - MYR3,500 Per Month
KL City, WP Kuala Lumpur
Near Train Station
- Prepare and produce a variety of breads following company recipes and SOPs.
- Handle the complete bread-making process, including kneading, shaping, filling, baking, and decorating.
- Maintain consistent product quality and presentation. ...
Be an early applicant!
Posted
7 days ago
MYR7,000 - MYR9,000 Per Month
Near Train Station
- Data Centre Services Management. Manage day to day data centre service delivery with oversight on vendor’s deliveries.
- Monitor the health of systems or platform solutions.
- Analysis of data centre infrastructure components and capacity planning for future projects/growth. ...
Be an early applicant!
Posted
a month ago
Product Technical Engineer (IT)
MYR3,000 - MYR5,500 Per Month
- Product & Technical Support
- Provide technical consultation and support to customers, sales teams, and business development personnel.
- Analyse customer requirements and recommend appropriate technical solutions. ...
Posted
12 days ago
Job searches related to “Engineering”