It Technician Jobs in Johor - August 2026 - Urgent Hiring

Paparan 807 hasil carian kerja kosong untuk "it technician" di Johor
Jangan lepaskan peluang untuk kerja It Technician terkini! di Johor
MYR2,000 - MYR2,500 Sebulan
  • Menjalankan pemeriksaan berkala ke atas mesin, peralatan dan fasiliti bagi mengenal pasti kerosakan serta keperluan penyelenggaraan.
  • Merancang dan melaksanakan jadual penyelenggaraan mingguan serta penyelenggaraan pencegahan (preventive maintenance).
  • Melakukan kerja membaiki, menyelenggara dan menyelesaikan masalah (troubleshooting) pada mesin dan peralatan pengeluaran. ...
Posted
4 days ago
MYR2,500 - MYR3,300 Sebulan
  • PLEASE ATTACH PHOTO TO YOUR RESUME
  • RESPONSIBILITIES
  • To fabricate complete wiring for Control Panel ,Motor control center (MCC),Programmable logic control (PLC),Distribution board (DB) & Junction board (JB) and related to it. ...
Posted
4 days ago
MYR1,800 - MYR2,500 Sebulan
  • Set up new products, including plating tool installation and machine parameter configuration.
  • Prepare machines and processes according to the assigned work order.
  • Troubleshoot product defects and production line abnormalities. ...
Posted
4 days ago

HA LI FA MANUFACTURING SDN BHD

MYR2,800 - MYR3,500 Sebulan
  • Daily Plant Operation: Operate and monitor pumps, blowers, stirrers, and filtration systems to ensure smooth wastewater treatment cycles.
  • Chemical Preparation & Dosing: Prepare chemical solutions (such as coagulants, flocculants, and pH adjusters) and monitor dosing levels based on influent quality.
  • Water Sampling & Testing: Conduct regular on-site testing (e.g., pH, Turbidity, DO, and settleability tests) and collect samples for laboratory analysis. ...
Posted
4 days ago
MYR2,000 - MYR2,800 Sebulan
  • To hire a technician for ELV (Extra Low Voltage) systems, here are the basic requirements:
  • Education:
  • Diploma or degree in electrical engineering, electronics, or a related field. ...
Posted
4 days ago
Undisclosed
  • Monitor and maintain critical infrastructure systems, including Cooling, power distribution, UPS, generators, and fire suppression systems.
  • Conduct regular inspections and preventive maintenance on all equipment.
  • Respond promptly to alarms and incidents, performing troubleshooting and repairs as needed. ...
Posted
4 days ago
MYR2,300 - MYR2,600 Sebulan
  • Meal allowance
  • Bachelor's (Preferred)
  • Lab Tech: 1 year (Preferred) ...
Posted
5 days ago

MUTIARA QTECH CORPORATION SDN.BHD.

MYR1,800 - MYR2,000 Sebulan
  • Carry out routine inspections and preventive maintenance for buildings and facilities.
  • Perform minor repairs involving electrical, plumbing, mechanical, civil, and landscaping works.
  • Respond to and resolve maintenance requests and complaints through the MyAduan system. ...
Posted
5 days ago

Df Automation And Robotics

MYR1,700 - MYR2,500 Sebulan
  • Execute product assembly for the robots and machines.
  • Install new products and test them to ensure they are working correctly.
  • Inspect product assembly before handover. ...
Posted
5 days ago

FOOD EXCELLENCE SPECIALIST SDN BHD

Undisclosed
Posted
5 days ago

SIK COLOR (M) SDN BHD

MYR1,700 - MYR2,000 Sebulan
  • making sure that measuring and testing equipment are set up and working correctly
  • checking that production methods meet relevant legislation
  • 3 Able to rotate shift and working night shift. ...
Posted
5 days ago
MYR3,500 - MYR5,000 Sebulan
  • Inspect, diagnose, and repair mechanical, electrical, and hydraulic faults in lorries and commercial vehicles.
  • Perform preventive maintenance, including engine servicing, oil changes, filter replacement, lubrication, and fluid checks.
  • Repair and maintain diesel engines, transmissions, braking systems, steering systems, suspension systems, and cooling systems. ...
Posted
5 days ago
MYR1,700 - MYR2,100 Sebulan
  • Maternity leave
  • Meal allowance
  • Professional development ...
Posted
5 days ago

Marriott International, Inc

Undisclosed
  • POSITION SUMMARY
  • Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.
  • Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. ...
Posted
5 days ago

Ming Shang Technology (Malaysia) Sdn Bhd

MYR2,500 - MYR3,000 Sebulan
  • Troubleshooting & Repair: Analyze rejected electronic assemblies and perform component-level repairs using tools like hand tools, microscopes, and x-rays.
  • Testing & Validation: Operate electronic test tools (oscilloscopes, multi-meters) to evaluate and debug assemblies against technical specifications.
  • Root Cause Analysis: Isolate defects (vendor vs. process) and maintain failure analysis reports in customer databases. ...
Posted
5 days ago

One Complete Solution (M) Sdn Bhd

Undisclosed

Gerbang Nusajaya

  • Perform routine inspections, preventive maintenance, and corrective maintenance on critical mechanical equipment.
  • Maintain HVAC systems, chillers, cooling towers, CRAC/CRAH units, pumps, piping systems, air handling units, and ventilation equipment.
  • Respond promptly to mechanical failures, alarms, and emergency situations to minimize operational downtime. ...
Posted
5 days ago
Undisclosed
  • Performing schedule maintenance tasks, troubleshooting and repair on machinery and equipments
  • Evaluates parts identifying areas requiring removal or rework to maintain customer specifications by using measuring tools.
  • Maintain record of maintenance activity, repair, and equipment performance ...
Posted
6 days ago

STMicroelectronics

Undisclosed

Malaysia

  • As a Test Technician will take ownership of all semiconductor test hardware troubleshooting, on-board soldering and improvement .
  • Be responsible for test hardware troubleshooting, improvement and OEE activities
  • Working closely with prod in production testing for output and quality target achievement. ...
Posted
19 days ago

STMicroelectronics

Undisclosed

Malaysia

  • As a Test Technician will take ownership of all semiconductor test hardware troubleshooting, on-board soldering and improvement .
  • Be responsible for test hardware troubleshooting, improvement and OEE activities
  • Working closely with prod in production testing for output and quality target achievement. ...
Posted
19 days ago
Undisclosed
  • Candidate must possess at least SKM in engineering (Mechanical/ Electrical/ Mechatronic/ Polymer) or any related field.
  • Applicants must be willing to work on rolling shift pattern and in SENAI, Johor.
  • Perform preventive and corrective maintenance on moulds. ...
Posted
12 days ago
Undisclosed
Posted
9 days ago

TDK-Lambda Malaysia Sdn. Bhd.

Undisclosed
  • Sustaining Production Excellence: Provide real-time technical support to daily manufacturing operations, rapidly troubleshooting issues to minimize equipment downtime and maximize asset utilization.
  • Technical Tool Competency: Demonstrate advanced proficiency in utilizing core engineering tools, diagnostic equipment, and specialized software to maintain peak system performance.
  • Proactive Problem Solving: Drive root-cause analysis on equipment and process anomalies, implementing preventive actions to mitigate repetitive failures before they disrupt production schedules. ...
Posted
9 days ago

TDK-Lambda Malaysia Sdn. Bhd.

Undisclosed
  • Sustaining Production Excellence: Provide real-time technical support to daily manufacturing operations, rapidly troubleshooting issues to minimize equipment downtime and maximize asset utilization.
  • Technical Tool Competency: Demonstrate advanced proficiency in utilizing core engineering tools, diagnostic equipment, and specialized software to maintain peak system performance.
  • Proactive Problem Solving: Drive root-cause analysis on equipment and process anomalies, implementing preventive actions to mitigate repetitive failures before they disrupt production schedules. ...
Posted
9 days ago
MYR1,850 - MYR1,850 Sebulan
  • Perform all laboratory analysis and ensure strictly adhere to preset parameter for production quality control and feedstock and input chemicals receiving quality control
  • Keep inventory of all samples taken. To label all samples clearly and to record all information on the sample, testing procedures, experimental observations and results in a research notebook.
  • Assist in the laboratory management such as chemicals control, equipment calibration, waste handling and housekeeping and provide support on general clerical tasks ...
Posted
9 days ago

Cheme Advance Services Sdn Bhd

MYR1,800 - MYR2,200 Sebulan
  • To provide service & plan routine activities to meet target service level.
  • To carry out servicing, checking, repairing, maintenance, troubleshooting, testing, commissioning & installation of equipment at customer’s site.
  • Brief customers on the operation & maintenance of equipment after successful commissioning. ...
Posted
9 days ago

CTI INTERNATIONAL (MALAYSIA) SDN. BHD

MYR2,500 - MYR3,500 Sebulan

Gerbang Nusajaya

  • Responsible for the in-process and final inspection of Assembly Product
  • Experience in contract manufacturing industry
  • Documents inspection results, maintain accurate inspection records, including test results and quality reports. ...
Posted
9 days ago
Undisclosed
  • Candidate must possess at least SKM in engineering (Mechanical/ Electrical/ Mechatronic/ Polymer) or any related field.
  • Applicants must be willing to work on rolling shift pattern and in SENAI, Johor.
  • Perform preventive and corrective maintenance on moulds. ...
Posted
12 days ago
Undisclosed
  • Performing schedule maintenance tasks, troubleshooting and repair on machinery and equipments
  • Evaluates parts identifying areas requiring removal or rework to maintain customer specifications by using measuring tools.
  • Maintain record of maintenance activity, repair, and equipment performance ...
Posted
9 days ago
MYR2,200 - MYR3,500 Sebulan
  • Operate and monitor production equipment and processes to ensure smooth operations
  • Perform routine inspections, maintenance, and troubleshooting of machinery
  • Identify process issues and implement corrective actions to minimize downtime ...
Posted
19 days ago

Excelitas Technologies Corp.

Undisclosed
  • Perform mechanical, electrical, optical, fiber optic, and optoelectronic assembly processes according to established work instructions and engineering specifications.
  • Execute Fiber Loop Assembly (FLA) manufacturing and assembly activities.
  • Perform fiber bonding, sealing, curing, and related manufacturing operations using approved materials and methods. ...
Posted
10 days ago