Mechanical Engineering Jobs in Pulau Pinang - October 2026 - Urgent Hiring
Showing 176 jobs results for
"mechanical engineering"
in Pulau Pinang
Undisclosed
- Complete mechanical assembly/electrical assembly with guidance by the senior technician, team leader, supervisor and/or engineering, installation and testing of equipment to time deadlines.2. Assemble and integrate a variety of mechanical and electrical assemblies. 3. Obtain and verify kitted (pre-picked) details parts and assemblies were issued correctly by comparing part numbers and quantities to drawing(s).4. Follow oral/written instructions provided by the senior technician, team leader, supervisor and/or engineering to complete assembly tasks.5. Ensure that parts issued are free of visible defects.6. Check work after completion of each operation in job and/or completed job to ensure assembly is complete per drawing, that there are no defects and that the work area is clean.7. Travel to customer sites and carry out installation, servicing work and training as scheduled.8. Other duties and assignments as instructed by superiors from time to time.9. Perform On Site Customer support assign by the Superior or the management.10. To comply to all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to general safety practices, standard operating procedure, work instructions, policies and guidelines provided by the company.
Be an early applicant!
Posted
19 days ago
Undisclosed
- Review training plans for the department
- Review assembly technician skills matrix yearly
- Review the skills matrix yearly once the technician completes the training ...
Be an early applicant!
Posted
19 days ago
Undisclosed
- To establish build sequence and production workflow.2. To create Work Instruction of the required process in the production floor.3. To assess the required jig, fixture and tools.4. To create PFMEA, control plan and risk assesment.5. Provide inputs and support IE to optimize production layout.6. To provide solutions and support for quality issue affecting production deliveries.7. To liaise with engineering, material, PM and MIS on BOM/ drawing/design changes/issues.8. To enchance processing techniques and methods applied in production floor.9. Drive and develop new process improvements to reduce cost and increase productivity.10. To provide training to production staff on the process, work instruction and improvement implementation to the production floor.11. Analysis of production data for productivity improvement.12. To lead/guide/train Process Engineer level 1,2, 3 on process engineering and line improvement.13. To comply with all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to general safety practices, standard operating procedure, work instructions, policies and guidelines provided by the company.14. Other duties and assignments as instructed by superiors from time to time.
Be an early applicant!
Posted
19 days ago
Undisclosed
- Monitor day-to-day inspection operations on vendors supplied products.
- To liaise with the incoming inspection team and buyer on supplier quality issues.
- Supplier quality performance monitoring, evaluation & drive for improvement. ...
Be an early applicant!
Posted
19 days ago
Undisclosed
- Monitor day-to-day inspection operations on vendors supplied products.
- To liaise with the incoming inspection team and buyer on supplier quality issues.
- Supplier quality performance monitoring, evaluation & drive for improvement. ...
Be an early applicant!
Posted
25 days ago
Undisclosed
- Performing daily, weekly, monthly, and scheduled preventive maintenance activities.
- Performing corrective maintenance and repair work during equipment breakdowns.
- Conducting equipment inspection and identifying abnormal conditions. ...
Be an early applicant!
Posted
25 days ago
Marketing & Engineering
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Review customer engineering drawings, specifications and requirements for quotation purposes.
- Understand machining processes such as CNC milling, CNC turning and conventional machining.
- Evaluate drawing requirements including material, dimensions, tolerances, surface finish and special requirements. ...
Posted
6 minutes ago
MYR2,000 - MYR3,000 Per Month
- Conduct routine inspections and performance testing of solar cell modules and arrays
- Perform electrical wiring and interconnection of solar panels, inverters and other system components
- Troubleshoot and diagnose electrical faults and mechanical issues within solar PV systems ...
Posted
6 minutes ago
Bending Technician/ Operator
MYR1,700 - MYR3,000 Per Month
- To operate bending machines with minimum supervision.
- To ensure bending process are carried out in accordance with specified requirements.
- To be responsible for safety handling of bending machines. ...
Posted
24 days ago
Undisclosed
Fresh Graduates
- Perform regular maintenance and troubleshooting of MFPs and E&E equipment to ensure optimal functionality.
- Diagnose and resolve technical issues promptly to minimize downtime.
- Install and configure MFPs and E&E equipment according to customer requirements. ...
Be an early applicant!
Posted
19 hours ago
MYR3,800 - MYR5,500 Per Month
Fresh Graduates
- Provide technical support to customers using SOLIDWORKS, addressing software issues and resolving technical queries.
- Collaborate with the sales team in pre-sales activities by delivering product demonstrations and technical presentations.
- Assist customers in post-sales activities by implementing and integrating SOLIDWORKS into their workflows. ...
Be an early applicant!
Posted
2 days ago
MYR3,800 - MYR5,500 Per Month
Fresh Graduates
- Provide technical support to customers using SOLIDWORKS, addressing software issues and resolving technical queries.
- Collaborate with the sales team in pre-sales activities by delivering product demonstrations and technical presentations.
- Assist customers in post-sales activities by implementing and integrating SOLIDWORKS into their workflows. ...
Be an early applicant!
Posted
2 days ago
MYR3,800 - MYR5,500 Per Month
Fresh Graduates
- Provide technical support to customers using SOLIDWORKS, addressing software issues and resolving technical queries.
- Collaborate with the sales team in pre-sales activities by delivering product demonstrations and technical presentations.
- Assist customers in post-sales activities by implementing and integrating SOLIDWORKS into their workflows. ...
Be an early applicant!
Posted
2 days ago
MYR3,800 - MYR5,500 Per Month
Fresh Graduates
- Provide technical support to customers using SOLIDWORKS, addressing software issues and resolving technical queries.
- Collaborate with the sales team in pre-sales activities by delivering product demonstrations and technical presentations.
- Assist customers in post-sales activities by implementing and integrating SOLIDWORKS into their workflows. ...
Be an early applicant!
Posted
2 days ago
MYR2,000 - MYR5,000 Per Month
- Assist with mechanical design and preparation of technical drawings.
- Operate manual / conventional milling machines.
- Read and understand basic mechanical drawings. ...
Be an early applicant!
Posted
4 days ago
Machinist (Cnc 3 Axis / Wire Cut)
MYR2,000 - MYR3,000 Per Month
Fresh Graduates
- To prepare and operate manual & semi-auto machines e.g. milling & grinding machines and CNC machines e.g. CNC multi-axis, Wire Cut & EDM machines.
- To set up machines to complete full cycles to fabricate large number of parts.
- To perform manual tapping and buffing of parts if required. ...
Posted
6 days ago
Undisclosed
- Conduct supplier assessments, audits, and qualifications to ensure raw materials and components meet specifications.
- Collaborate with suppliers to define and enforce quality control requirements for materials.
- Assist in supplier selection by evaluating potential vendors' quality systems. ...
Posted
a month ago
Quality Assurance (QA) Manager
MYR5,000 - MYR7,000 Per Month
- Lead and manage the Quality Assurance (QA) and Quality Control (QC) team.
- Maintain and improve the company’s Quality Management System (QMS).
- Ensure products meet customer specifications, engineering drawings, and quality requirements. ...
Posted
3 days ago
MYR2,000 - MYR5,000 Per Month
- • 协助机械设计及绘制技术图纸• 操作手动／传统铣床• 阅读及理解基本机械图纸• 按照要求进行加工及制作• 确保工作质量、准确度及安全• 负责机器、工具及工作区域的日常维护• 配合团队完成主管安排的工作
Posted
19 days ago
MYR5,000 - MYR7,000 Per Month
- Designs automated machine modules and mechanical parts according to customer requirements and relevant automation industry standards.
- Prepares detailed drawings and the Bill of Materials (BOM) for all mechanical fabrication parts and standard electro-pneumatic components.
- Prepares final production procedures, operation instructions, and process control instructions. ...
Posted
15 days ago
MYR3,000 - MYR4,000 Per Month
- Assessing project feasibility through product drawing and B.O.M review. (including built cycle time, avaibility of tools & equipment, non-recurring engineering (NRE) cost etc.)
- Set up the bill of materials (B.O.M) for the request for quotation (RFQ) stage in the Agile system.
- Establishing System Bill of Materials (B.O.M) ...
Posted
a month ago
MYR5,000 - MYR7,000 Per Month
- Designs automated machine modules and mechanical parts according to customer requirements and relevant automation industry standards.
- Prepares detailed drawings and the Bill of Materials (BOM) for all mechanical fabrication parts and standard electro-pneumatic components.
- Prepares final production procedures, operation instructions, and process control instructions. ...
Posted
15 days ago
Undisclosed
- Oversee or assist superior in coordinating the in-house/on-site assembly & installation of company products.
- Communicate and solve problems with counterparts from other departments to ensure timely coordination of engineering, purchasing and production.
- Be an interface point to customer counterparts for assembly and site installation. ...
Be an early applicant!
Posted
19 days ago
Undisclosed
- Analyze and suggest improvements for manufacturing workflows and layouts to improve throughput.
- Conduct Root Cause Analysis for quality and productivity issues using 5M+1E and Fishbone diagrams.
- Implement small to medium-scale process improvement projects using Lean and Six Sigma tools. ...
Be an early applicant!
Posted
19 days ago
Undisclosed
- To generate the machine program for the machine to run.
- All programs complied with the drawing needed.
- Verify to confirm the program meets the products meeting specification. ...
Be an early applicant!
Posted
19 days ago
Undisclosed
- Optimization on metal work machine production flow and output.
- To review the new drawing metal work fabrication capabilities and provide the process flow, BOM, estimate production lead time for MES BOO & BOM.
- Establish WI for process plan, process WI and machine operation/set-up procedure for Metal Work processes. ...
Be an early applicant!
Posted
19 days ago
Undisclosed
- Responsible to ensure sales objectives and targets are met.2. Communicate and liaise with customers in handling customer enquiries, order processing, product details, agreementpreparation, etc.3. Ensure customer information request, complaints and suggestion are handled promptly and professionally.4. Prepared and processed quotation and sales order.5. Closed monitoring order delivery and ensured customer's payment up-to date.6. Work closely with related department to ensure customer requests are performed accordingly.7. Maintain existing customer base and develop new customers.8. Build and maintain good relationship with customers at all levels.9. Other duties and assignments as instructed by superiors from time to time.10. To comply to all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to generalsafety practices, standard operating procedure, work instructions, policies and guidelines provided by the company.
Be an early applicant!
Posted
19 days ago
Undisclosed
- Assist on mechanical assembly/electrical assembly, installation and testing of equipment to time deadlines.
- Assemble and integrate a variety of mechanical and electrical assemblies.
- Follow oral/written instructions provided by the team leader, supervisor and/or engineering to complete assembly tasks. ...
Be an early applicant!
Posted
19 days ago
Undisclosed
- Run the machine according to plan.
- Perform preventive maintenance according to plan.
- Inspect product and inform Leader / Superior on product quality issues. ...
Be an early applicant!
Posted
19 days ago
Undisclosed
- To implement Quality Management System & Document Control System.
- To monitor & improve document control(Engineering Change Notice, drawing/BOM approval & distribution, forms & format control).
- To plan, schedule & conduct internal audits. ...
Be an early applicant!
Posted
19 days ago