Operator Machine Jobs in Selangor - September 2026 - Urgent Hiring
Showing 96 jobs results for
"operator machine"
in Selangor
Assembler and Machine Operator
MYR1,800 - MYR1,850 Per Month
Fresh Graduates
- • Perform production activities of Brazed Plat Heat Exchanger including assembly, brazing, testing, and packing.• Perform production activities strictly follow the work order, standard operation procedure (SOP) and engineering drawing to ensure high quality production.• Assist in equipment troubleshooting, repair, and maintenance when required.• Participate in product audits, testing, and review activities.• Ensure workplace safety and take preventive measures against accidents.
Be an early applicant!
Posted
4 days ago
Up to MYR105 Per Day
- Set up and operate production machines according to approved work instructions and SOPs.
- Perform machine start-up, shutdown, adjustments, and basic troubleshooting.
- Monitor machine performance and operating parameters to maintain product quality and production efficiency. ...
Be an early applicant!
Posted
13 days ago
Machine Operator (Punch – CNC Turret Punch)
MYR2,000 - MYR2,400 Per Month
Near Train Station
- Set-up and operate CNC machine to produce precision parts
- Verify conformance of finished work piece to specification using precision instruments (Vernier, Micrometer)
- Responsible for operational activities relating to punching machines ...
Be an early applicant!
Posted
9 days ago
Machine Operator (Bend – CNC Press Brake)
MYR2,000 - MYR2,400 Per Month
Near Train Station
- Set-up and operate CNC machine to produce precision parts
- Verify conformance of finished work piece to specification using precision instruments (Vernier, Micrometer)
- Responsible for operational activities relating to bending machines ...
Be an early applicant!
Posted
9 days ago
MYR1,700 - MYR1,800 Per Month
Near Train Station
- To operate all types of machine, e.g: tableting, sachet, labelling, shrink wrap, sealing machine
- Maintain machine and ensure it is function and follow the guideline
- Ensure production hit daily output target, ensure all job is done according timeline ...
Be an early applicant!
Posted
14 days ago
Chat Available
Assembler and Machine Operator
MYR1,800 - MYR1,850 Per Month
+Additional Compensation
Fresh Graduates
- • Perform production activities of Brazed Plat Heat Exchanger including assembly, brazing, testing, and packing.• Perform production activities strictly follow the work order, standard operation procedure (SOP) and engineering drawing to ensure high quality production.• Assist in equipment troubleshooting, repair, and maintenance when required.• Participate in product audits, testing, and review activities.• Ensure workplace safety and take preventive measures against accidents.
Be an early applicant!
Posted
3 hours ago
Chat Available
MYR1,700 - MYR1,800 Per Month
Near Train Station
- To operate all types of machine, e.g: tableting, sachet, labelling, shrink wrap, sealing machine
- Maintain machine and ensure it is function and follow the guideline
- Ensure production hit daily output target, ensure all job is done according timeline ...
Be an early applicant!
Posted
14 days ago
Chat Available
Machine Operator (Bend – CNC Press Brake)
MYR2,000 - MYR2,400 Per Month
Near Train Station
- Set-up and operate CNC machine to produce precision parts
- Verify conformance of finished work piece to specification using precision instruments (Vernier, Micrometer)
- Responsible for operational activities relating to bending machines ...
Be an early applicant!
Posted
2 hours ago
Chat Available
Machine Operator (Punch – CNC Turret Punch)
MYR2,000 - MYR2,400 Per Month
Near Train Station
- Set-up and operate CNC machine to produce precision parts
- Verify conformance of finished work piece to specification using precision instruments (Vernier, Micrometer)
- Responsible for operational activities relating to punching machines ...
Be an early applicant!
Posted
2 hours ago
Chat Available
Up to MYR105 Per Day
- Set up and operate production machines according to approved work instructions and SOPs.
- Perform machine start-up, shutdown, adjustments, and basic troubleshooting.
- Monitor machine performance and operating parameters to maintain product quality and production efficiency. ...
Posted
13 days ago
MYR2,500 - MYR2,800 Per Month
- Job Descriptions:
- Monitor finishing mill stands according to the production schedule and SOP
- Set and adjust roll gap, guide alignment, and roll pass ...
Be an early applicant!
Posted
7 days ago
MYR2,500 - MYR2,800 Per Month
Near Train Station
- Job Descriptions:
- Monitor finishing mill stands according to the production schedule and SOP
- Set and adjust roll gap, guide alignment, and roll pass ...
Be an early applicant!
Posted
14 days ago
Chat Available
MYR2,500 - MYR2,800 Per Month
Near Train Station
- Job Descriptions:
- Monitor finishing mill stands according to the production schedule and SOP
- Set and adjust roll gap, guide alignment, and roll pass ...
Be an early applicant!
Posted
14 days ago
MYR2,500 - MYR2,800 Per Month
- Job Descriptions:
- Monitor finishing mill stands according to the production schedule and SOP
- Set and adjust roll gap, guide alignment, and roll pass ...
Be an early applicant!
Posted
22 days ago
Service Engineer (Mandarin Speaker) - Klang/Johor
MYR3,000 - MYR4,500 Per Month
Fresh Graduates
- Prior experience in equipment maintenance, repair, or after-sales service is preferred;
- Willing and able to perform field service work and respond to emergency service calls when required;
- Strong customer communication skills with a high level of responsibility and professionalism. ...
Be an early applicant!
Posted
3 days ago
Chat Available
MYR2,500 - MYR2,800 Per Month
- Job Descriptions:
- Monitor finishing mill stands according to the production schedule and SOP
- Set and adjust roll gap, guide alignment, and roll pass ...
Posted
22 days ago
MYR2,000 - MYR2,200 Per Month
- · Perform stylus calibration and create CMM setup before measurement.
- · Run CMM inspections for FAI, IPQC, and Final QC according to planning and ensure efficient machine utilization.
- · Generate and verify CMM measurement reports. ...
Be an early applicant!
Posted
a month ago
Chat Available
Service Engineer (Mandarin Speaker) - Klang/Johor
MYR3,000 - MYR4,500 Per Month
Fresh Graduates
- Prior experience in equipment maintenance, repair, or after-sales service is preferred;
- Willing and able to perform field service work and respond to emergency service calls when required;
- Strong customer communication skills with a high level of responsibility and professionalism. ...
Posted
3 days ago
Chat Available
Up to MYR1,700 Per Month
- Prepare equipment and production supplies before executing work instructions.
- Operate equipment safely and effectively for production processing.
- Ensure equipment is maintained in good condition and safe working order. ...
Posted
a month ago
Undisclosed
Near Train Station
- Operate UV Metal Printing Machines (Fuji 4-Colour System).
- Ensure all printed products meet quality standards.
- Monitor production output and reduce material waste. ...
Be an early applicant!
Posted
7 days ago
Undisclosed
Near Train Station
- Operate UV Metal Printing Machines (Fuji 4-Colour System).
- Ensure all printed products meet quality standards.
- Monitor production output and reduce material waste. ...
Be an early applicant!
Posted
7 days ago
Undisclosed
Near Train Station
- Operate UV Metal Printing Machines (Fuji 4-Colour System).
- Ensure all printed products meet quality standards.
- Monitor production output and reduce material waste. ...
Be an early applicant!
Posted
22 days ago
Chat Available
MYR2,000 - MYR2,200 Per Month
- · Perform stylus calibration and create CMM setup before measurement.
- · Run CMM inspections for FAI, IPQC, and Final QC according to planning and ensure efficient machine utilization.
- · Generate and verify CMM measurement reports. ...
Posted
a month ago
MYR2,500 - MYR2,800 Per Month
- Job Descriptions:
- Monitor finishing mill stands according to the production schedule and SOP
- Set and adjust roll gap, guide alignment, and roll pass ...
Be an early applicant!
Posted
22 days ago
Chat Available
Undisclosed
Near Train Station
- Operate UV Metal Printing Machines (Fuji 4-Colour System).
- Ensure all printed products meet quality standards.
- Monitor production output and reduce material waste. ...
Be an early applicant!
Posted
22 days ago
Chat Available
MYR1,000 - MYR2,000 Per Hour
Fresh Graduates
Near Train Station
- Menimbang dan menyediakan biji kopi mentah (green bean) mengikut resipi dan jadual pengeluaran harian
- Memuatkan mesin pemanggang, memantau proses pemanggangan bersama penyelia, dan menguruskan penyejukan biji kopi selepas dipanggang
- Menimbang, membungkus dan mengedap (seal) produk mengikut saiz dan spesifikasi pesanan ...
Posted
13 days ago
Chat Available
MYR2,000 - MYR3,500 Per Month
Near Train Station
- Operate and maintain CNC lathe machines to produce high-quality parts according to specifications and blueprints.
- Set up, calibrate, and troubleshoot CNC lathe machines, including loading programs, selecting appropriate tooling, and adjusting machine parameters.
- Read and interpret technical drawings, blueprints, and schematics to ensure accurate machining of parts. ...
Be an early applicant!
Posted
2 days ago
MYR2,000 - MYR3,500 Per Month
Near Train Station
- Operate and maintain CNC lathe machines to produce high-quality parts according to specifications and blueprints.
- Set up, calibrate, and troubleshoot CNC lathe machines, including loading programs, selecting appropriate tooling, and adjusting machine parameters.
- Read and interpret technical drawings, blueprints, and schematics to ensure accurate machining of parts. ...
Be an early applicant!
Posted
2 days ago
MYR1,700 - MYR1,750 Per Month
Fresh Graduates
- Update the stock level of raw materials.
- Prepare paper cores using the paper core machine according to the required size stated in the Work Order.
- Manage the storage, usage, and scrap/leftover of raw materials, packaging materials, and paper cores. ...
Be an early applicant!
Posted
7 days ago
MYR3,000 - MYR4,500 Per Month
Fresh Graduates
Near Train Station
- Have operate CNC milling mahcine
- Set up and teaching CNC machine
- CNC programming ...
Be an early applicant!
Posted
a month ago