Process Engineer Jobs in Pulau Pinang - September 2026 - Urgent Hiring
Showing 291 jobs results for
"process engineer"
in Pulau Pinang
Undisclosed
- To establish build sequence and production workflow.2. To create Work Instruction of the required process in the production floor.3. To assess the required jig, fixture and tools.4. To create PFMEA, control plan and risk assesment.5. Provide inputs and support IE to optimize production layout.6. To provide solutions and support for quality issue affecting production deliveries.7. To liaise with engineering, material, PM and MIS on BOM/ drawing/design changes/issues.8. To enchance processing techniques and methods applied in production floor.9. Drive and develop new process improvements to reduce cost and increase productivity.10. To provide training to production staff on the process, work instruction and improvement implementation to the production floor.11. Analysis of production data for productivity improvement.12. To lead/guide/train Process Engineer level 1,2, 3 on process engineering and line improvement.13. To comply with all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to general safety practices, standard operating procedure, work instructions, policies and guidelines provided by the company.14. Other duties and assignments as instructed by superiors from time to time.
Be an early applicant!
Posted
16 days ago
Undisclosed
- To supervise and lead daily overall engineering department activities.
- To report all engineering related KPI(s) and other management assigned KPI(s) (a) weekly (b) monthly, to departmental HOD and corporate.
- To support Manufacturing Engineers to prepare documentation. ...
Posted
3 months ago
MYR8,000 - MYR15,000 Per Month
- Lead the process design and optimization of water treatment systems, specialty gas supply systems and chemical delivery systems, formulate technical schemes, process flows and equipment selection standards;
- Responsible for semiconductor/ pharmaceutic project process systems (including UPW, Wastewater treatment, special gas and chemical distribution) calculation and drawings based on project criteria and client/national codes;
- Manage the process team in project implementation, review design drawings, technical parameters and construction schemes, and solve key process problems in system commissioning and operation; ...
Be an early applicant!
Posted
20 hours ago
Undisclosed
- To supervise and lead daily overall engineering department activities.
- To report all engineering related KPI(s) and other management assigned KPI(s) (a) weekly (b) monthly, to departmental HOD and corporate.
- To support Manufacturing Engineers to prepare documentation. ...
Posted
a month ago
Undisclosed
- Optimization on metal work machine production flow and output.
- To review the new drawing metal work fabrication capabilities and provide the process flow, BOM, estimate production lead time for MES BOO & BOM.
- Establish WI for process plan, process WI and machine operation/set-up procedure for Metal Work processes. ...
Be an early applicant!
Posted
16 days ago
MYR3,800 - MYR5,000 Per Month
- Ensure process readiness through effective FMEA, Control Plan, OCAP, Work Instruction, Process Spec & Check List including EHS requirements.
- Monitor and drive improvement on key process health indicators (Yield/Defect, Quality etc).
- Drive Statistical Process Control and improvement to meet/exceed process Cpk target. ...
Posted
2 months ago
Undisclosed
- Hand on setup the equipment and process during engineering activities such as engineering evaluations.
- Evaluation report compilation and initial data analysis.
- Support Yield & Quality KPI improvement. ...
Posted
a month ago
Undisclosed
- Evaluate production variables and operational constraints to identify areas for improvement.
- Develop, present, and implement engineering solutions to optimize manufacturing processes.
- Improve overall production and manufacturing efficiency, output, and productivity. ...
Posted
2 months ago
MYR1,700 - MYR1,800 Per Month
Fresh Graduates
- Berpengalaman dalam memasang dan mengendalikan mesin Power Press serta mould.
- Mempunyai pengalaman dalam mengawal dan merekod pergerakan keluar masuk mould dan alat ganti (spare parts).
- Mempunyai pengalaman berkaitan penyelenggaraan mesin dan mould adalah satu kelebihan. ...
Posted
6 days ago
MYR10,000 - MYR15,000 Per Month
George Town, Pulau Pinang
- Lead product transfer, NPI, and industrialization activities across Contract Manufacturing (CM) sites.
- Drive manufacturing readiness, including process development, capacity planning, equipment qualification, and production ramp-up.
- Develop and optimize scalable manufacturing processes to achieve quality, cost, delivery, and productivity targets. ...
Posted
9 days ago
Undisclosed
- To perform routine product sustaining functions. F/A and to resolve any engineering issues.
- To perform process engineering, process optimization, new material qualification, cost reduction, quality, yield and output improvement.
- Provide engineering support in trouble-shooting line and product's related problem. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Responsible for process ownership of DA/GA machine in assembly line.
- Establish and setup new DA/GA assembly process capabilities and materials including hand-on equipment setup.
- Monitor performance, quality and reliability of die attach process. Identify problems, recommendation, and implementation of corrective and preventive actions. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
a month ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
a month ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
a month ago
Undisclosed
- Perform basic troubleshooting and corrective actions within assigned scope.
- Record work activities, inspection results, and test data as required.
- Monitor machine performance during testing and identify any abnormalities or malfunctions. ...
Be an early applicant!
Posted
2 months ago
MYR4,000 - MYR4,999 Per Month
- Ensure that awareness (and/ or implementation) of Process Improvement is in place and updated from time to time.
- Reviews operational schedules, coordinates with the TEAM for continuous improvements of process.
- Ensure all improvement done is apply and visible on each process. ...
Posted
2 months ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Be an early applicant!
Posted
a month ago
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Perform Failure Analysis & Fault Isolation (FAFI) to determine defect modes and root causes.
- Conduct electrical failure analysis to identify component defects and support factory rejection cases.
- Carry out validation and fault isolation using tools such as Parametric Analyzer, Keithley meter, iTDR, SEM/EDX, and IRLC. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Responsible for process ownership of CIS Smart Manufacturing – AMR machine and new system in assembly line.
- Establish and setup new AMR and system for assembly process capabilities and materials including hand-on equipment setup and prepare document and specification for AMR and new system control.
- Monitor performance and quality of AMR machine and system process. Identify problems, recommendation, and implementation of corrective and preventive actions. ...
Posted
a month ago
Undisclosed
- Analyse data and monitor implementation of al Process and Quality Control Strategy.
- Drive for quality continuous improvement project (Minimize Manual Touch Point, E-system (eliminate manual recording)
- Monitor of critical process CPK data of ensuring a stable process to maintain product quality. ...
Posted
a month ago
Undisclosed
- Monitor day-to-day inspection operations on vendors supplied products.
- To liaise with the incoming inspection team and buyer on supplier quality issues.
- Supplier quality performance monitoring, evaluation & drive for improvement. ...
Be an early applicant!
Posted
16 days ago
Undisclosed
- Monitor day-to-day inspection operations on vendors supplied products.
- To liaise with the incoming inspection team and buyer on supplier quality issues.
- Supplier quality performance monitoring, evaluation & drive for improvement. ...
Be an early applicant!
Posted
22 days ago
MYR4,000 - MYR4,999 Per Month
- Supervise and coordinate all die casting operations across multiple shifts.
- Ensure adherence to production schedules, quality standards, and safety procedures.
- Monitor machine performance and casting parameters to ensure product consistency and reduce defects. ...
Posted
2 months ago
MYR3,200 - MYR3,800 Per Month
- Arrange and follow up on daily production activities.
- Lead production operators to complete work according to the production schedule and SOPs.
- Manage manpower allocation, production output and product quality. ...
Posted
a month ago
MYR2,200 - MYR3,300 Per Month
Fresh Graduates
Bukit Minyak, Pulau Pinang
- Collect and verify incoming samples.
- Register and maintain sample records in the laboratory management system.
- Perform sample preparation procedures, including wet digestion, filtration, and related laboratory techniques. ...
Posted
2 months ago
Undisclosed
- Perform process improvement plan and sustaining activity to ensure process yield improve.
- Machine maintenance and troubleshooting for any machine breakdown
- Involved in regular engineering NPI activities for product, process & equipment qualification ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Responsible for the entire designated area on EOL Package Saw.
- Carry out Preventive Maintenance planning and development programs.
- Equipment down time monitoring and improvement plan. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Posted
a month ago
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Posted
a month ago