Quality Control Jobs in Bayan Lepas - September 2026 - Urgent Hiring
Showing 109 jobs results for
"quality control"
in Bayan Lepas
MYR4,500 - MYR6,000 Per Month
- Oversee the daily production processes for PCBA and SMT lines to ensure efficiency, quality, and timely delivery of products.
- Collaborate with cross-functional teams to troubleshoot and resolve production issues, ensuring minimal downtime and maximum productivity.
- Implement and optimize manufacturing processes to improve yield, reduce costs, and enhance product quality. ...
Be an early applicant!
Posted
6 days ago
MYR4,500 - MYR5,000 Per Month
Fresh Graduates
- Assist in the daily production activities, ensuring smooth operations and adherence to production schedules and quality standards.
- Support senior engineers in implementing and monitoring lean manufacturing principles and process improvement initiatives to enhance efficiency and reduce waste.
- Participate in root cause analysis for production issues and contribute to the development and implementation of corrective actions. ...
Posted
6 days ago
Undisclosed
- Serve as focal point of contact for customers on quality-related matters with minimal supervision.2. Ensure products meet customer specifications, drawings, and quality standards.3. Lead customer audits preparation, coordination, and follow-up on audit findings.4. Lead root cause analysis and corrective action implementation; ensure timely closure and effectiveness verification.5. Prepare and maintain quality documentation (Control Plan, Inspection Reports, FAI, PPAP documents where applicable).6. Monitor quality performance metrics and drive improvement actions based on data analysis.7. Identify process improvement opportunities and work with cross-functional teams to implement solutions.8. Provide technical guidance to QA Technicians on inspection methods and quality requirements.9. Participate in new product introduction (NPI), including pretest, first article inspection, and buyoff.10. Support QMS implementation, audit compliance, and continuous improvement initiatives.11. Handle internal non-conformance and support MRB activities.12. Ensure compliance to ISO standards, safety practices, SOP, and company policies.13. Mentor and coach E1 on quality standards and documentation best practices.
Be an early applicant!
Posted
14 days ago
Undisclosed
- Set-up, convert, run and monitor AOI machine
- Follow work instruction for AOI process
- Create recipe for different devices ...
Posted
a month ago
MYR2,600 - MYR4,000 Per Month
- Lead and supervise manufacturing operators and line leaders to achieve production output, quality, and cycle time targets.
- Ensure compliance with cleanroom protocols, safety regulations, and quality standards.
- Participate in process improvement, cost reduction, yield enhancement, and RPA projects. ...
Be an early applicant!
Posted
2 days ago
MYR3,000 - MYR6,000 Per Month
- Perform inspection and verification of incoming raw materials, components, and parts to ensure compliance with specifications and quality standards.
- Work closely with suppliers to address incoming quality issues and drive continuous improvement.
- Support supplier quality activities including supplier audits and corrective actions. ...
Posted
2 months ago
MYR2,000 - MYR2,500 Per Month
- Demonstrates strong attention to detail and precision in selecting specifications and executing measurements in accordance with correct CD definitions. Familiarity with process layer structures (e.g., nitride, spacer) is an added advantage.
- Shows patience and consistency in performing repetitive measurement tasks.
- Possesses strong analytical thinking, including sound decision-making on whether CDs should be corrected or retained. Able to assess if available specifications provide sufficient information to proceed with CD corrections. ...
Posted
2 months ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Be an early applicant!
Posted
a month ago
MYR1,700 - MYR1,800 Per Month
- Operate production machinery and equipment
- Ensure daily production targets are met
- Maintain quality and safety standards ...
Posted
2 months ago
Undisclosed
- Establish and maintain Process standards.
- Conduct time study to establish Process UPH for current and new equipments or new processes.
- Maintain the standards and update changes when required. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Posted
a month ago
Undisclosed
- Able perform Tester Preventive Maintenance and Tester Calibration.
- Tester owner for at least 1 tester platform
- Follow up on daily issues on the tester platform owned. ...
Posted
a month ago
Undisclosed
- Set-up, convert, run and monitor AOI machine
- Follow work instruction for AOI process
- Create recipe for different devices ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Hand on setup the equipment and process during engineering activities such as engineering evaluations.
- Evaluation report compilation and initial data analysis.
- Support Yield & Quality KPI improvement. ...
Posted
a month ago
Undisclosed
- Set-up, convert, run and monitor wirebond machine
- Follow work instruction for wirebond process
- Create recipe for different devices ...
Posted
a month ago
MYR4,000 - MYR4,999 Per Month
- Ensure that awareness (and/ or implementation) of Process Improvement is in place and updated from time to time.
- Reviews operational schedules, coordinates with the TEAM for continuous improvements of process.
- Ensure all improvement done is apply and visible on each process. ...
Posted
2 months ago
Undisclosed
- To perform FA on devices which are reported to be failing electrical test from Manufacturing/NPI or customer return.
- To write quality FA report and provide conclusive findings that can help engineering team to root cause the issue.
- To innovate FA approach or methodology to improve FA capability and cycle time at the lowest cost for the benefits of the organization. ...
Be an early applicant!
Posted
a month ago
MYR1,700 - MYR2,200 Per Month
- Operate machines in accordance with Manufacturing Process Instructions and Work Instruction sheets
- Support and contribute to the improvement of production procedures, processes, and controls
- Achieve assigned production targets for quantity and quality ...
Posted
2 months ago
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Posted
a month ago
Undisclosed
- Set-up, convert, run and monitor AOI machine
- Follow work instruction for AOI process
- Create recipe for different devices ...
Posted
a month ago
Undisclosed
- Set-up, convert, run and monitor AOI machine
- Follow work instruction for AOI process
- Create recipe for different devices ...
Posted
a month ago
Undisclosed
- Analyse data and monitor implementation of al Process and Quality Control Strategy.
- Drive for quality continuous improvement project (Minimize Manual Touch Point, E-system (eliminate manual recording)
- Monitor of critical process CPK data of ensuring a stable process to maintain product quality. ...
Posted
a month ago
MYR3,000 - MYR3,650 Per Month
- Support regulatory certification and compliance activities for new and existing products across global markets.
- Monitor certification renewal schedules and compliance requirements to ensure certifications remain current.
- Maintain and update regulatory certification records and document repositories. ...
Posted
a month ago
MYR3,500 - MYR5,000 Per Month
- Set up, calibrate, and operate CNC lathes and milling machines according to blueprints, technical drawings, and work orders.
- Perform routine maintenance and troubleshooting on CNC machinery to ensure optimal performance and minimize downtime.
- Read and interpret engineering drawings, blueprints, and specifications to determine machining operations, tooling, and setup requirements. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Design new package types and conduct feasibility study / Technical Gap Analysis.
- Generate drawing leadframe, copper clip, package outline and strip outline.
- Generate external bonding diagram. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment (Cu Clip Inline Machine and all Offline Machine).
- Verify machine settings and ensure calibration is correct before starting operations. ...
Be an early applicant!
Posted
a month ago
MYR2,000 - MYR3,500 Per Month
- Perform basic troubleshooting and corrective actions within assigned scope.
- Record work activities, inspection results, and test data as required.
- Monitor machine performance during testing and identify any abnormalities or ...
Be an early applicant!
Posted
2 months ago
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Posted
a month ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
a month ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
a month ago
Job searches related to “Quality Control”