Quality Engineer Jobs in Bayan Lepas - September 2026 - Urgent Hiring
Showing 81 jobs results for
"quality engineer"
in Bayan Lepas
Undisclosed
- Monitor day-to-day inspection operations on vendors supplied products.
- To liaise with the incoming inspection team and buyer on supplier quality issues.
- Supplier quality performance monitoring, evaluation & drive for improvement. ...
Be an early applicant!
Posted
9 days ago
MYR2,000 - MYR2,500 Per Month
- Demonstrates strong attention to detail and precision in selecting specifications and executing measurements in accordance with correct CD definitions. Familiarity with process layer structures (e.g., nitride, spacer) is an added advantage.
- Shows patience and consistency in performing repetitive measurement tasks.
- Possesses strong analytical thinking, including sound decision-making on whether CDs should be corrected or retained. Able to assess if available specifications provide sufficient information to proceed with CD corrections. ...
Posted
2 months ago
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Posted
a month ago
Undisclosed
- Analyse data and monitor implementation of al Process and Quality Control Strategy.
- Drive for quality continuous improvement project (Minimize Manual Touch Point, E-system (eliminate manual recording)
- Monitor of critical process CPK data of ensuring a stable process to maintain product quality. ...
Posted
a month ago
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Perform Failure Analysis & Fault Isolation (FAFI) to determine defect modes and root causes.
- Conduct electrical failure analysis to identify component defects and support factory rejection cases.
- Carry out validation and fault isolation using tools such as Parametric Analyzer, Keithley meter, iTDR, SEM/EDX, and IRLC. ...
Be an early applicant!
Posted
a month ago
MYR3,500 - MYR6,000 Per Month
- Lead a team of manufacturing operators and line leaders to achieve output, quality, and cycle time targets.
- Follow 5S practices, safety regulations, and quality standards at all times.
- Comply with company policies, EHS requirements, and industry regulations. ...
Be an early applicant!
Posted
10 hours ago
Undisclosed
- Serve as focal point of contact for customers on quality-related matters with minimal supervision.2. Ensure products meet customer specifications, drawings, and quality standards.3. Lead customer audits preparation, coordination, and follow-up on audit findings.4. Lead root cause analysis and corrective action implementation; ensure timely closure and effectiveness verification.5. Prepare and maintain quality documentation (Control Plan, Inspection Reports, FAI, PPAP documents where applicable).6. Monitor quality performance metrics and drive improvement actions based on data analysis.7. Identify process improvement opportunities and work with cross-functional teams to implement solutions.8. Provide technical guidance to QA Technicians on inspection methods and quality requirements.9. Participate in new product introduction (NPI), including pretest, first article inspection, and buyoff.10. Support QMS implementation, audit compliance, and continuous improvement initiatives.11. Handle internal non-conformance and support MRB activities.12. Ensure compliance to ISO standards, safety practices, SOP, and company policies.13. Mentor and coach E1 on quality standards and documentation best practices.
Be an early applicant!
Posted
9 days ago
Undisclosed
- Set-up, convert, run and monitor AOI machine
- Follow work instruction for AOI process
- Create recipe for different devices ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Posted
a month ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Posted
a month ago
Undisclosed
- Set-up, convert, run and monitor AOI machine
- Follow work instruction for AOI process
- Create recipe for different devices ...
Posted
a month ago
Undisclosed
- Set-up, convert, run and monitor AOI machine
- Follow work instruction for AOI process
- Create recipe for different devices ...
Posted
a month ago
MYR4,000 - MYR4,999 Per Month
- Ensure that awareness (and/ or implementation) of Process Improvement is in place and updated from time to time.
- Reviews operational schedules, coordinates with the TEAM for continuous improvements of process.
- Ensure all improvement done is apply and visible on each process. ...
Posted
a month ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
a month ago
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Posted
a month ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
a month ago
MYR3,000 - MYR6,000 Per Month
- Perform inspection and verification of incoming raw materials, components, and parts to ensure compliance with specifications and quality standards.
- Work closely with suppliers to address incoming quality issues and drive continuous improvement.
- Support supplier quality activities including supplier audits and corrective actions. ...
Posted
a month ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
a month ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
a month ago
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Posted
a month ago
MYR2,000 - MYR2,500 Per Month
- Demonstrates strong attention to detail and precision in selecting specifications and executing measurements in accordance with correct CD definitions. Familiarity with process layer structures (e.g., nitride, spacer) is an added advantage.
- Shows patience and consistency in performing repetitive measurement tasks.
- Possesses strong analytical thinking, including sound decision-making on whether CDs should be corrected or retained. Able to assess if available specifications provide sufficient information to proceed with CD corrections. ...
Posted
2 months ago
MYR3,000 - MYR4,000 Per Month
- To operate complex equipment and analytical tools in ESD environment.
- Operating and using Central Lab support, Package and Physical FA techniques; BKM to satisfy all FA need.
- Taking up the responsibilities of equipment ownership, development and proliferation to users if identified. ...
Posted
2 months ago
MYR2,000 - MYR2,500 Per Month
- Demonstrates strong attention to detail and precision in selecting specifications and executing measurements in accordance with correct CD definitions. Familiarity with process layer structures (e.g., nitride, spacer) is an added advantage.
- Shows patience and consistency in performing repetitive measurement tasks.
- Possesses strong analytical thinking, including sound decision-making on whether CDs should be corrected or retained. Able to assess if available specifications provide sufficient information to proceed with CD corrections. ...
Posted
2 months ago
MYR3,000 - MYR3,600 Per Month
- Perform electrical validation and fault isolation on failed products.
- Identify and analyze physical defects related to electrical failures.
- Evaluate assembly, fabrication, and substrate processes to determine root causes of failure. ...
Posted
2 months ago