Quality Engineer Jobs in Senai - June 2026 - Urgent Hiring

Showing 32 jobs results for "quality engineer" in Senai

Never miss any updates for Quality Engineer jobs

premium banner
Chat Available
Undisclosed
+Additional Compensation
Fresh Graduates
  • Perform on-site troubleshooting, maintenance, and repair of our engineering products and systems
  • Provide technical support and guidance to clients, helping them resolve issues and maximise the performance of our solutions
  • Conduct preventive maintenance inspections and recommend actions to improve system reliability ...

Be an early applicant!

Posted
10 hours ago
Chat Available
Undisclosed
+Additional Compensation
Fresh Graduates
  • To participate in functional test development projects for PCBA Functional Tests and HLA (High-Level Assembly) Functional Tests. Work scopes includes but not limited to UUT functionality verification in AC/DC/RF/Embedded electronics domains & UUT Firmware Programming.
  • To develop test software using NI software suite (LabVIEW, TestStand, C#)
  • To design test interface boards, custom electronics and system level schematics (Machine level wiring diagram) for machines/testers. ...
PLC Programming Ladder
+1

Be an early applicant!

Posted
a day ago
High Opportunity
Chat Available
Undisclosed
+Additional Compensation
Fresh Graduates
  • Perform on-site troubleshooting, maintenance, and repair of our engineering products and systems
  • Provide technical support and guidance to clients, helping them resolve issues and maximise the performance of our solutions
  • Conduct preventive maintenance inspections and recommend actions to improve system reliability ...

Be an early applicant!

Posted
a day ago
High Opportunity
Chat Available
MYR2,500 - MYR3,200 Per Month
  • Diploma in Environmental Engineering, Water Technology, or related field OR2. 1-2 years of relevant working experience in wastewater treatment plant (WWTP) operations.3. Familiar with the operation and maintenance of WWTP equipment, as well as laboratory testing procedures.4. Knowledge of the Department of Environment (DOE) regulations is an added advantage.5. Certified Competent Person (CePIETSO-PCP/BP) preferred, with strong technical capabilities and hands-on experience in maintaining wastewater treatment system.6. CePSWaM Certificate is and added advantage7. Ability to work independently and manage responsibilities effectively.
Environmental Engineering Water Technology
+6
Posted
a month ago
Chat Available
Undisclosed
+Additional Compensation
Fresh Graduates
  • Perform on-site troubleshooting, maintenance, and repair of our engineering products and systems
  • Provide technical support and guidance to clients, helping them resolve issues and maximise the performance of our solutions
  • Conduct preventive maintenance inspections and recommend actions to improve system reliability ...

Be an early applicant!

Posted
a day ago
High Opportunity
Chat Available
Undisclosed
+Additional Compensation
Fresh Graduates
  • Perform on-site troubleshooting, maintenance, and repair of our engineering products and systems
  • Provide technical support and guidance to clients, helping them resolve issues and maximise the performance of our solutions
  • Conduct preventive maintenance inspections and recommend actions to improve system reliability ...

Be an early applicant!

Posted
a day ago
High Opportunity
Chat Available
Undisclosed
+Additional Compensation
Fresh Graduates
  • • Inspect incoming raw metal sheets, coils, and components for thickness, grade, and surface condition.
  • Verify supplier certificates, material identification, and lot traceability.
  • Perform dimensional checks after cutting, bending, punching, and forming operations using callipers, micrometres, gauges, and other measuring tools. ...
Quality Control Inspection Techniques
+6
Posted
21 days ago
Undisclosed
  • Candidate must possess at least a Degree in Mechanical Engineering or an equivalent qualification.
  • Preferably with at least 1 year of working experience in the injection moulding industry, particularly in Quality Assurance (QA) and Quality Control (QC).
  • Hands-on experience in CMM measurement and programming is required. ...
Posted
14 days ago
Undisclosed
  • Candidate must possess at least a Degree in Mechanical Engineering or an equivalent qualification.
  • Preferably with at least 1 year of working experience in the injection moulding industry, particularly in Quality Assurance (QA) and Quality Control (QC).
  • Hands-on experience in CMM measurement and programming is required. ...
Posted
14 days ago
Undisclosed
  • Candidate must possess at least a Degree in Mechanical Engineering or an equivalent qualification.
  • Preferably with at least 1 year of working experience in the injection moulding industry, particularly in Quality Assurance (QA) and Quality Control (QC).
  • Hands-on experience in CMM measurement and programming is required. ...
Posted
15 days ago
Undisclosed
  • Candidate must possess at least a Degree in Mechanical Engineering or an equivalent qualification.
  • Preferably with at least 1 year of working experience in the injection moulding industry, particularly in Quality Assurance (QA) and Quality Control (QC).
  • Hands-on experience in CMM measurement and programming is required. ...
Posted
15 days ago
Undisclosed
  • Candidate must possess at least a Degree in Mechanical Engineering or an equivalent qualification.
  • Preferably with at least 1 year of working experience in the injection moulding industry, particularly in Quality Assurance (QA) and Quality Control (QC).
  • Hands-on experience in CMM measurement and programming is required. ...
Posted
15 days ago
MYR5,000 - MYR8,000 Per Month
  • Opportunities for promotion
  • Professional development
  • Job Responsibilities ...
Posted
21 days ago
MYR5,000 - MYR8,000 Per Month
  • Opportunities for promotion
  • Professional development
  • Job Responsibilities ...
Posted
21 days ago
MYR5,000 - MYR6,500 Per Month
  • Responsible for supporting project quotation activities before project nomination by preparing quality planning documents and quality-related data.
  • Develop control methods and inspection frequency based on product special characteristics to ensure effective control of critical characteristics.
  • Participate in PFMEA development and review. ...
Posted
a month ago
Undisclosed
  • Develop, optimize, and standardize manufacturing processes for medical devices/consumables to ensure process stability, traceability, and compliance.
  • Lead New Product Introduction (NPI), including DFM review, process development, IQ/OQ/PQ validation, pilot run, mass production ramp-up, and handover.
  • Develop and update SOPs, Control Plans, PFMEA, and inspection specifications in compliance with ISO13485/ISO9001 and medical regulations. ...
Posted
4 days ago
Undisclosed
  • About
  • Together we make. Come make with us.
  • Overview ...
Posted
16 days ago
MYR10,000 - MYR20,000 Per Month
  • Lead the entire process of APQP quality module implementation, formulating project quality plans, phased quality objectives, and control schemes.
  • Coordinate project quality risk assessments, developing specific control measures for key processes and special characteristics to avoid major quality risks before mass production.
  • Manage the entire process of new product prototype development, following up on issues arising during prototype trial production and dimensional inspection, organizing internal analysis, and promoting closed-loop rectification. ...
Posted
a month ago
MYR10,000 - MYR20,000 Per Month
  • Lead the entire process of APQP quality module implementation, formulating project quality plans, phased quality objectives, and control schemes.
  • Coordinate project quality risk assessments, developing specific control measures for key processes and special characteristics to avoid major quality risks before mass production.
  • Manage the entire process of new product prototype development, following up on issues arising during prototype trial production and dimensional inspection, organizing internal analysis, and promoting closed-loop rectification. ...
Posted
a month ago
Undisclosed
  • Degree in Manufacturing / Mechanical / Electronic / Mechatronic Engineering or equivalent
  • Fresh graduates are welcome; 1 year experience is an added advantage
  • Strong problem-solving and analytical skills ...
Posted
14 days ago
Undisclosed
  • Bachelor's Degree in Engineering or a related field.
  • Minimum 5 years of experience in quality management within EMS or manufacturing.
  • Strong knowledge of management systems and code of conduct (e.g., ISO 9001; ISO 14001; ISO 27001 and RBA code of conduct). ...
Posted
15 days ago
Undisclosed
  • Bachelor's Degree in Engineering or a related field.
  • Minimum 5 years of experience in quality management within EMS or manufacturing.
  • Strong knowledge of management systems and code of conduct (e.g., ISO 9001; ISO 14001; ISO 27001 and RBA code of conduct). ...
Posted
15 days ago
Undisclosed
  • Bachelor's Degree in Engineering or a related field.
  • Minimum 5 years of experience in quality management within EMS or manufacturing.
  • Strong knowledge of management systems and code of conduct (e.g., ISO 9001; ISO 14001; ISO 27001 and RBA code of conduct). ...
Posted
15 days ago
Undisclosed
  • Bachelor's degree in Mechanical Engineering, Chemical Engineering, Manufacturing Engineering, or related disciplines.
  • Minimum 5 years of working experience in the plastic injection moulding or manufacturing industry.
  • Strong knowledge of injection moulding processes, engineering project management, and new product development (NPD). ...
Posted
15 days ago
Undisclosed
  • Bachelor's degree in Mechanical Engineering, Chemical Engineering, Manufacturing Engineering, or related disciplines.
  • Minimum 5 years of working experience in the plastic injection moulding or manufacturing industry.
  • Strong knowledge of injection moulding processes, engineering project management, and new product development (NPD). ...
Posted
15 days ago

Eps Ventures Sdn Bhd

MYR6,000 - MYR7,000 Per Month
  • Set QC procedures, policies, and benchmarks
  • Ensure compliance with internal and external standards (e.g. ISO)
  • Monitor raw materials, in-process production, and finished goods ...
Posted
6 days ago

EPS Ventures Sdn Bhd

MYR6,000 - MYR7,000 Per Month
  • Set QC procedures, policies, and benchmarks
  • Ensure compliance with internal and external standards (e.g. ISO)
  • Monitor raw materials, in-process production, and finished goods ...
Posted
6 days ago
MYR2,200 - MYR3,500 Per Month
  • Reads and analyzes schematic diagrams, circuit descriptions and similar technical information.
  • Troubleshoots and repairs failed products.
  • Inspects for physical and visual quality requirements. Isolates and replaces faulty components. ...
Posted
a day ago
MYR2,000 - MYR2,500 Per Month
  • Inspect materials and products to ensure quality standards are met.
  • Perform quality checks and testing during production.
  • Record inspection results and prepare quality reports. ...
Posted
6 days ago

Venture Ges Manufacturing Services (M) Sdn Bhd

MYR2,200 - MYR3,000 Per Month
  • Dental insurance
  • Free parking
  • Health insurance ...
Posted
a month ago