2,300+ Semiconductor Jobs in Malaysia | Job Vacancies | September 2026 | Maukerja

search.result_querys_job "semiconductor"
Jangan lepaskan peluang untuk kerja Semiconductor terkini!
SGD7,000 - SGD9,000 Sebulan

Singapore

  • Lead LSR molding technology across the full medical device product lifecycle, from product development to commercialization and sustaining engineering
  • Drive process development, validation (IQ/OQ/PQ), design for manufacturability (DFM), and continuous process improvement
  • Ensure compliance with ISO 13485, FDA QSR/QMSR, and other regulatory requirements ...
Posted
23 days ago
SGD5,000 - SGD5,000 Sebulan

Singapore

  • Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
  • Provide warranty tool support or paid service for out-of-warranty tool by performing on-site preventive maintenance of equipment and attending to equipment abnormalities. Coordinate all service actions with customer to minimize downtime or system interruptions
  • Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components, or parts where appropriate ...
Posted
a month ago
SGD3,500 - SGD3,500 Sebulan

Singapore

  • Responsible for setting up, installing, and troubleshooting of semiconductor equipment at customer sites.
  • Responsible for providing pre and post sales technical support to service and upgrade equipment.
  • Assist in technical training for customers on setup, operations and maintenance. ...
Posted
24 days ago
SGD2,800 - SGD2,800 Sebulan

Singapore

  • Location: Tai Seng
  • Working hours: 8.30am - 5.30pm
  • Salary: up to $3,500 (Depending on experiences) ...
Posted
a month ago
SGD3,500 - SGD3,500 Sebulan

Singapore

  • Provide technical support for installation, maintenance, and troubleshooting of vacuum and semiconductor processing equipment at customer sites.
  • Support and execute Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT) to validate system performance and process requirements.
  • Ensure readiness and proper control of service tools, including calibration and compliance with operational standards. ...
Posted
a month ago
SGD4,500 - SGD4,500 Sebulan

Singapore

  • Execute on-site troubleshooting, repairs, and preventive maintenance for semiconductor etch, clean, and deposition equipment to ensure reliable system performance.
  • Support installation, relocation, and commissioning of equipment, including start-up, calibration, and system qualification at customer facilities.
  • Diagnose technical issues and provide timely solutions while maintaining strong engagement with customers to ensure high service quality and satisfaction. ...
Posted
a month ago
SGD4,500 - SGD4,500 Sebulan

Singapore

  • Execute on-site troubleshooting, repairs, and preventive maintenance for semiconductor etch, clean, and deposition equipment to ensure reliable system performance.
  • Support installation, relocation, and commissioning of equipment, including start-up, calibration, and system qualification at customer facilities.
  • Diagnose technical issues and provide timely solutions while maintaining strong engagement with customers to ensure high service quality and satisfaction. ...
Posted
a month ago
SGD5,000 - SGD5,000 Sebulan

Singapore

  • Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line for wet etch process.
  • Establish, review and update specifications, workflow, quality and safety related documentation for production line.
  • Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage. ...
Posted
a month ago
Undisclosed

Singapore

  • Owns the process development and technical support of the Flip Chip process for silicon photonic chip wafers, with OSAT or internal line. Process may include plasma cleaning, flux engineering, pick & place, reflow, underfill, curing and/or TCB/NCP flux-less flow.
  • DOE to characterize process window and margin. Optimize process integration with upstream processes (e.g. bump/FO) to increase yield and manufacturability.
  • Material Characterization & Selection: Evaluate and qualify new manufacturing raw materials, including NCP, flux, underfill etc, as applicable. ...
Posted
a month ago
Undisclosed

Malaysia

  • Lead a functional engineering team in Penang focusing on test chip and electric test structure development and layout design with strong RnD focus towards Infineon’s global technology development teams
  • Technical advisor/ coach/ facilitator to the team regarding analog mixed signal layout in a developing RnD environment.
  • Effectively use your leadership to manage tasks based on complexity levels and experience of task owners. ...
Posted
a month ago
SGD3,500 - SGD3,500 Sebulan

Singapore

  • Responsible for setting up, installing, and troubleshooting of semiconductor equipment at customer sites.
  • Responsible for providing pre and post sales technical support to service and upgrade equipment.
  • Assist in technical training for customers on setup, operations and maintenance. ...
Posted
a month ago
SGD4,500 - SGD4,500 Sebulan

Singapore

  • Execute on-site troubleshooting, repairs, and preventive maintenance for semiconductor etch, clean, and deposition equipment to ensure reliable system performance.
  • Support installation, relocation, and commissioning of equipment, including start-up, calibration, and system qualification at customer facilities.
  • Diagnose technical issues and provide timely solutions while maintaining strong engagement with customers to ensure high service quality and satisfaction. ...
Posted
a month ago
SGD2,300 - SGD3,000 Sebulan

Singapore

Posted
4 months ago
Undisclosed
  • Infineon Technologies AG in Malaysia seeks a Principal Engineer Test Development to create and optimize test concepts, packages, and programs for power discrete products, focusing on Si, SiC, and WBG technologies. You will drive test concept definition, collaboration with design teams, and cross-functional risk management.
  • The role emphasizes test program development, debug, optimization, and transfer across global teams, with a strong emphasis on delivering efficient, reliable tests and
Posted
23 days ago
MYR10,000 - MYR15,000 Sebulan
  • To lead the team to achieve or exceed overall corporate sales objectives.
  • Identify & develop strategic business plans, new market opportunities & expand market coverage.
  • Budget & forecasting responsibilities. ...
Posted
2 days ago
MYR15,000 - MYR20,000 Sebulan
  • End-to-End Execution: Plan, execute, and monitor the overall program lifecycle. Drive the creation, review, approval, and maintenance of the Program Plan and Work Breakdown Structure (WBS), including resource allocation.
  • Lifecycle Management: Implement changes as dictated by the product lifecycle process an proactively recommend process improvements.
  • Interdependency Management: Coordinate multiple projects, manage their interdependencies, and optimize resource utilization across the entire program. ...
Posted
9 days ago

INGENIOUS WORKS INTERNATIONAL (M) SDN BHD

MYR3,800 - MYR5,500 Sebulan

Malaysia

  • Elevate estimating and costing skills by preparing complete tender packages across electrical and mechanical scopes.
  • Expand commercial experience through client and subcontractor negotiation, RFI management and contract cost reporting to directors.
  • Build a practical vendor network via market research and supplier engagement for faster, more reliable bids. ...
Posted
24 days ago
SGD2,300 - SGD2,300 Sebulan

Singapore

Posted
6 months ago
SGD2,300 - SGD2,300 Sebulan

Singapore

Posted
8 months ago
SGD2,300 - SGD2,300 Sebulan

Singapore

Posted
10 months ago
SGD2,300 - SGD2,300 Sebulan

Singapore

Posted
a year ago
SGD3,000 - SGD3,000 Sebulan

Singapore

  • Support process development experiments involving ALD, CVD, thermal processing, and related thin-film deposition techniques.
  • Perform material characterization using SEM, EDX, Raman, PL, and Ellipsometry.
  • Prepare substrates, chemicals, precursors, and consumables for experiments. ...
Posted
25 years ago