Semiconductor Manufacturing Jobs in Pulau Pinang - October 2026 - Urgent Hiring
Showing 64 jobs results for
"semiconductor manufacturing"
in Pulau Pinang
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Perform Failure Analysis & Fault Isolation (FAFI) to determine defect modes and root causes.
- Conduct electrical failure analysis to identify component defects and support factory rejection cases.
- Carry out validation and fault isolation using tools such as Parametric Analyzer, Keithley meter, iTDR, SEM/EDX, and IRLC. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Able perform Tester Preventive Maintenance and Tester Calibration.
- Tester owner for at least 1 tester platform
- Follow up on daily issues on the tester platform owned. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Testing products for safety, capacities, compliance, and performance.
- Examining and investigating specific aspects and components of products in question.
- Compiling reports on findings and testing data gathered. ...
Be an early applicant!
Posted
a month ago
MYR5,000 - MYR6,000 Per Month
- In-Process Patrol Inspection: Conduct patrol inspections of production materials, semi-finished products, operating procedures, and process parameters according to SOP and quality standards.
- Process Risk Identification & Prevention: Identify potential quality risks related to process changes, personnel, equipment, materials, and production environment, and implement preventive measures.
- Quality Abnormality Handling: Identify defective products and process deviations, issue abnormality notifications, and follow up on containment, root cause analysis, and corrective actions. ...
Be an early applicant!
Posted
4 hours ago
MYR2,600 - MYR4,000 Per Month
- Lead and supervise manufacturing operators and line leaders to achieve production output, quality, and cycle time targets.
- Ensure compliance with cleanroom protocols, safety regulations, and quality standards.
- Participate in process improvement, cost reduction, yield enhancement, and RPA projects. ...
Posted
15 days ago
Lead Process Design Engineer
MYR8,000 - MYR15,000 Per Month
- Lead the process design and optimization of water treatment systems, specialty gas supply systems and chemical delivery systems, formulate technical schemes, process flows and equipment selection standards;
- Responsible for semiconductor/ pharmaceutic project process systems (including UPW, Wastewater treatment, special gas and chemical distribution) calculation and drawings based on project criteria and client/national codes;
- Manage the process team in project implementation, review design drawings, technical parameters and construction schemes, and solve key process problems in system commissioning and operation; ...
Be an early applicant!
Posted
9 days ago
Senior Process Design Engineer
MYR8,000 - MYR15,000 Per Month
- Lead the process design and optimization of water treatment systems, specialty gas supply systems and chemical delivery systems, formulate technical schemes, process flows and equipment selection standards;
- Responsible for semiconductor/ pharmaceutic project process systems (including UPW, Wastewater treatment, special gas and chemical distribution) calculation and drawings based on project criteria and client/national codes;
- Manage the process team in project implementation, review design drawings, technical parameters and construction schemes, and solve key process problems in system commissioning and operation; ...
Be an early applicant!
Posted
9 days ago
MYR2,200 - MYR2,500 Per Month
+Additional Compensation
Fresh Graduates
- Perform Test sequent for unit under test, Identify and troubleshoot processes, material, or equipment issues to minimize down time and recommend solutions.
- Perform test related tasks for unit under test via Test platform provided by Company,
- Trouble shoot test unit, perform debugging for minor Test failure unit. ...
Posted
a month ago
MYR8,000 - MYR8,500 Per Month
- Production Line Management
- - Manage daily precision electronics assembly and testing operations.
- - Lead and supervise 10–30 operators and technicians. ...
Be an early applicant!
Posted
2 days ago
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Posted
2 months ago
MYR8,000 - MYR15,000 Per Month
- Lead the process design and optimization of water treatment systems, specialty gas supply systems and chemical delivery systems, formulate technical schemes, process flows and equipment selection standards;
- Responsible for semiconductor/ pharmaceutic project process systems (including UPW, Wastewater treatment, special gas and chemical distribution) calculation and drawings based on project criteria and client/national codes;
- Manage the process team in project implementation, review design drawings, technical parameters and construction schemes, and solve key process problems in system commissioning and operation; ...
Be an early applicant!
Posted
11 days ago
MYR8,000 - MYR10,000 Per Month
- Own the overall NPI program plan, milestone schedule, deliverables, dependencies, and execution timeline from prototype through HVM release.
- Define program scope, execution priorities, ownership, escalation paths, and phase-gate deliverable to ensure clear accountability across functions.
- Drive regular program reviews to track progress, risks, blockers, recovery actions, and decision requirements against committed milestones. - Prepare and govern phase-gate readiness reports to support qualification release, customer commitments, and transition to high-volume manufacturing. ...
Be an early applicant!
Posted
12 days ago
Undisclosed
- Execute production on Robot welding process.
- Conduct routine inspections to ensure equipment reliability, safety, and optimal performance (wire feed, gas nozzle cleaning, diffuser etc)
- Assist engineers in robot programming, teaching and minor set-up.Monitor machine performance and feedback recurring issues to supevisor. ...
Be an early applicant!
Posted
a month ago
MYR2,500 - MYR3,500 Per Month
- Prepare and manage shipping-related documents for equipment, spare parts, and repair services.
- Coordinate domestic and international shipments with logistics providers and vendors.
- Maintain accurate records of shipping activities, customs documentation, and delivery status. ...
Posted
17 days ago
MYR2,500 - MYR3,500 Per Month
- Prepare and manage shipping-related documents for equipment, spare parts, and repair services.
- Coordinate domestic and international shipments with logistics providers and vendors.
- Maintain accurate records of shipping activities, customs documentation, and delivery status. ...
Posted
17 days ago
MYR2,500 - MYR3,500 Per Month
- Prepare and manage shipping-related documents for equipment, spare parts, and repair services.
- Coordinate domestic and international shipments with logistics providers and vendors.
- Maintain accurate records of shipping activities, customs documentation, and delivery status. ...
Posted
17 days ago
MYR2,500 - MYR3,500 Per Month
- Prepare and manage shipping-related documents for equipment, spare parts, and repair services.
- Coordinate domestic and international shipments with logistics providers and vendors.
- Maintain accurate records of shipping activities, customs documentation, and delivery status. ...
Posted
17 days ago
MYR2,500 - MYR3,500 Per Month
- Prepare and manage shipping-related documents for equipment, spare parts, and repair services.
- Coordinate domestic and international shipments with logistics providers and vendors.
- Maintain accurate records of shipping activities, customs documentation, and delivery status. ...
Posted
17 days ago
MYR2,500 - MYR3,500 Per Month
- Prepare and manage shipping-related documents for equipment, spare parts, and repair services.
- Coordinate domestic and international shipments with logistics providers and vendors.
- Maintain accurate records of shipping activities, customs documentation, and delivery status. ...
Posted
17 days ago
MYR10,000 - MYR15,000 Per Month
George Town, Pulau Pinang
- Lead product transfer, NPI, and industrialization activities across Contract Manufacturing (CM) sites.
- Drive manufacturing readiness, including process development, capacity planning, equipment qualification, and production ramp-up.
- Develop and optimize scalable manufacturing processes to achieve quality, cost, delivery, and productivity targets. ...
Posted
19 days ago
MYR10,000 - MYR15,000 Per Month
George Town, Pulau Pinang
- Lead product transfer, NPI, and industrialization activities across Contract Manufacturing (CM) sites.
- Drive manufacturing readiness, including process development, capacity planning, equipment qualification, and production ramp-up.
- Develop and optimize scalable manufacturing processes to achieve quality, cost, delivery, and productivity targets. ...
Posted
4 days ago
MYR10,000 - MYR15,000 Per Month
George Town, Pulau Pinang
- Lead product transfer, NPI, and industrialization activities across Contract Manufacturing (CM) sites.
- Drive manufacturing readiness, including process development, capacity planning, equipment qualification, and production ramp-up.
- Develop and optimize scalable manufacturing processes to achieve quality, cost, delivery, and productivity targets. ...
Posted
19 days ago
MYR10,000 - MYR15,000 Per Month
George Town, Pulau Pinang
- Lead product transfer, NPI, and industrialization activities across Contract Manufacturing (CM) sites.
- Drive manufacturing readiness, including process development, capacity planning, equipment qualification, and production ramp-up.
- Develop and optimize scalable manufacturing processes to achieve quality, cost, delivery, and productivity targets. ...
Posted
19 days ago
Undisclosed
- Perform process improvement plan and sustaining activity to ensure process yield improve.
- Machine maintenance and troubleshooting for any machine breakdown
- Involved in regular engineering NPI activities for product, process & equipment qualification ...
Be an early applicant!
Posted
2 months ago
Undisclosed
- To perform FA on devices which are reported to be failing electrical test from Manufacturing/NPI or customer return.
- To write quality FA report and provide conclusive findings that can help engineering team to root cause the issue.
- To innovate FA approach or methodology to improve FA capability and cycle time at the lowest cost for the benefits of the organization. ...
Be an early applicant!
Posted
2 months ago
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Posted
2 months ago
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Posted
2 months ago
Undisclosed
- Manage new product Qual/Eng till HVM.
- Handling New Product Design and Process Characterization
- Prepare and Setup new BAS and Process Flow ...
Posted
2 months ago
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Posted
2 months ago
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Posted
2 months ago