Carry out modification works such as wiring/electrical works, rewiring, installation of lights, circuits, and electrical socket supplies for household equipment, and troubleshooting wiring issues.
Perform air conditioning maintenance and servicing, including troubleshooting and minor repairs.
Knowledge of smart meter installation is an added advantage.
...
Electrical Systems
Problem Solving
Technical Maintenance
Home Renovation
Plumbing
Air Conditioning Maintenance
Troubleshooting
Technical Support
Preventive Maintenance
HVAC Systems
Technical Repair
Ventilation and Air Conditioning (HVAC)
Air Conditioning Service
Air Condition Installation
Assist senior electricians in the installation, maintenance, and repair of electrical systems and equipment according to blueprints and technical diagrams.
Perform routine inspections and testing of electrical components and systems to identify and address potential issues.
Operate hand and power tools safely and effectively for various electrical tasks, ensuring adherence to safety protocols.
...
Assemble and/or repair product assemblies and components by following work orders, engineering drawings, standard operating procedures (SOPs), and verbal instructions.
Perform manufacturing processes such as bending, tacking, welding, tweaking, leak testing, and component assembly in accordance with approved specifications.
Operate production equipment, test fixtures, electronic measuring instruments, and leak detection equipment safely and effectively.
...
• Minimum SPM qualification or equivalent technical qualification.
• Previous experience in a cleanroom or manufacturing environment.
• Ability to read and interpret engineering drawings
blueprints
and work instructions.
• Attention to detail to identify product defects and maintain high-quality standards.
• Ability to stand and perform repetitive tasks for extended periods while working in a cleanroom environment.
• Comfortable in wearing full PPE - cleanroom garments
gloves
face mask
safety glasses
and other required PPE throughout the shift.
Responsible to carry out inspection and repairs of the entire facility’s electrical installation and monitoring on high and low voltage facilities equipment performance.
Responsible to assist operation of the generator sets, synchronizing of generator sets, energizing electrical switch gear, panel boards and all electrical installation as required by operations.
Ensure equipment operations related to electrical and instruments are always maintained at optimum performance with minimum downtime. Responsible to assist operations team to troubleshoot electrical / instrument related and any emergency situations during operation.
...
Responsible for M&E works on site including installation, troubleshooting, maintenance, testing, and Inspection of the Electrical Wiring System (Compliance with safety standards);
Able to interpret drawings;
To handle and perform electrical wiring works and install all types of commonly used wiring and wiring accessories;
...
QA/QC Document Management: Maintain, log, and organize all QA/QC documentation, including Method Statements, Inspection and Test Plans (ITPs), Request for Inspections (RFIs), Non-Conformance Reports (NCRs), Corrective Action Reports (CARs), and Material Review Applications (MRAs).
EDMS & Register Maintenance: Operate and update the Electronic Document Management System (EDMS) and maintain accurate master document registers for all incoming/outgoing QA/QC transmittals.
Inspection & Testing Records: Coordinate the registration, distribution, filing, and close-out tracking of site inspection sheets, lab test reports (soil, concrete, asphalt, steel), and third-party test results.
...
Document Control
Quality Assurance
Quality Control
Construction Documentation
Project Management Software
Technical Documentation
Compliance
Auditing
Record Keeping
Information Management
Provide technical service included assembly, testing, servicing, maintenance and setting up of all electrical products including water dispenser, pumps.
Manage and maintain control panel.
Troubleshoot electrical and mechanical problem of all company products.
...
QA/QC Document Management: Maintain, log, and organize all QA/QC documentation, including Method Statements, Inspection and Test Plans (ITPs), Request for Inspections (RFIs), Non-Conformance Reports (NCRs), Corrective Action Reports (CARs), and Material Review Applications (MRAs).
EDMS & Register Maintenance: Operate and update the Electronic Document Management System (EDMS) and maintain accurate master document registers for all incoming/outgoing QA/QC transmittals.
Inspection & Testing Records: Coordinate the registration, distribution, filing, and close-out tracking of site inspection sheets, lab test reports (soil, concrete, asphalt, steel), and third-party test results.
...
Document Control
Quality Assurance
Quality Control
Construction Documentation
Project Management Software
Technical Documentation
Compliance
Auditing
Record Keeping
Information Management
QA/QC Document Management: Maintain, log, and organize all QA/QC documentation, including Method Statements, Inspection and Test Plans (ITPs), Request for Inspections (RFIs), Non-Conformance Reports (NCRs), Corrective Action Reports (CARs), and Material Review Applications (MRAs).
EDMS & Register Maintenance: Operate and update the Electronic Document Management System (EDMS) and maintain accurate master document registers for all incoming/outgoing QA/QC transmittals.
Inspection & Testing Records: Coordinate the registration, distribution, filing, and close-out tracking of site inspection sheets, lab test reports (soil, concrete, asphalt, steel), and third-party test results.
...
Document Control
Quality Assurance
Quality Control
Construction Documentation
Project Management Software
Technical Documentation
Compliance
Auditing
Record Keeping
Information Management
Provide technical service included assembly, testing, servicing, maintenance and setting up of all electrical products including water dispenser, pumps.
Manage and maintain control panel.
Troubleshoot electrical and mechanical problem of all company products.
...
QA/QC Document Management: Maintain, log, and organize all QA/QC documentation, including Method Statements, Inspection and Test Plans (ITPs), Request for Inspections (RFIs), Non-Conformance Reports (NCRs), Corrective Action Reports (CARs), and Material Review Applications (MRAs).
EDMS & Register Maintenance: Operate and update the Electronic Document Management System (EDMS) and maintain accurate master document registers for all incoming/outgoing QA/QC transmittals.
Inspection & Testing Records: Coordinate the registration, distribution, filing, and close-out tracking of site inspection sheets, lab test reports (soil, concrete, asphalt, steel), and third-party test results.
...
QA/QC Document Management: Maintain, log, and organize all QA/QC documentation, including Method Statements, Inspection and Test Plans (ITPs), Request for Inspections (RFIs), Non-Conformance Reports (NCRs), Corrective Action Reports (CARs), and Material Review Applications (MRAs).
EDMS & Register Maintenance: Operate and update the Electronic Document Management System (EDMS) and maintain accurate master document registers for all incoming/outgoing QA/QC transmittals.
Inspection & Testing Records: Coordinate the registration, distribution, filing, and close-out tracking of site inspection sheets, lab test reports (soil, concrete, asphalt, steel), and third-party test results.
...
QA/QC Document Management: Maintain, log, and organize all QA/QC documentation, including Method Statements, Inspection and Test Plans (ITPs), Request for Inspections (RFIs), Non-Conformance Reports (NCRs), Corrective Action Reports (CARs), and Material Review Applications (MRAs).
EDMS & Register Maintenance: Operate and update the Electronic Document Management System (EDMS) and maintain accurate master document registers for all incoming/outgoing QA/QC transmittals.
Inspection & Testing Records: Coordinate the registration, distribution, filing, and close-out tracking of site inspection sheets, lab test reports (soil, concrete, asphalt, steel), and third-party test results.
...
QA/QC Document Management: Maintain, log, and organize all QA/QC documentation, including Method Statements, Inspection and Test Plans (ITPs), Request for Inspections (RFIs), Non-Conformance Reports (NCRs), Corrective Action Reports (CARs), and Material Review Applications (MRAs).
EDMS & Register Maintenance: Operate and update the Electronic Document Management System (EDMS) and maintain accurate master document registers for all incoming/outgoing QA/QC transmittals.
Inspection & Testing Records: Coordinate the registration, distribution, filing, and close-out tracking of site inspection sheets, lab test reports (soil, concrete, asphalt, steel), and third-party test results.
...
QA/QC Document Management: Maintain, log, and organize all QA/QC documentation, including Method Statements, Inspection and Test Plans (ITPs), Request for Inspections (RFIs), Non-Conformance Reports (NCRs), Corrective Action Reports (CARs), and Material Review Applications (MRAs).
EDMS & Register Maintenance: Operate and update the Electronic Document Management System (EDMS) and maintain accurate master document registers for all incoming/outgoing QA/QC transmittals.
Inspection & Testing Records: Coordinate the registration, distribution, filing, and close-out tracking of site inspection sheets, lab test reports (soil, concrete, asphalt, steel), and third-party test results.
...
QA/QC Document Management: Maintain, log, and organize all QA/QC documentation, including Method Statements, Inspection and Test Plans (ITPs), Request for Inspections (RFIs), Non-Conformance Reports (NCRs), Corrective Action Reports (CARs), and Material Review Applications (MRAs).
EDMS & Register Maintenance: Operate and update the Electronic Document Management System (EDMS) and maintain accurate master document registers for all incoming/outgoing QA/QC transmittals.
Inspection & Testing Records: Coordinate the registration, distribution, filing, and close-out tracking of site inspection sheets, lab test reports (soil, concrete, asphalt, steel), and third-party test results.
...
Document Control
Quality Assurance
Quality Control
Construction Documentation
Project Management Software
Technical Documentation
Compliance
Auditing
Record Keeping
Information Management
QA/QC Document Management: Maintain, log, and organize all QA/QC documentation, including Method Statements, Inspection and Test Plans (ITPs), Request for Inspections (RFIs), Non-Conformance Reports (NCRs), Corrective Action Reports (CARs), and Material Review Applications (MRAs).
EDMS & Register Maintenance: Operate and update the Electronic Document Management System (EDMS) and maintain accurate master document registers for all incoming/outgoing QA/QC transmittals.
Inspection & Testing Records: Coordinate the registration, distribution, filing, and close-out tracking of site inspection sheets, lab test reports (soil, concrete, asphalt, steel), and third-party test results.
...
QA/QC Document Management: Maintain, log, and organize all QA/QC documentation, including Method Statements, Inspection and Test Plans (ITPs), Request for Inspections (RFIs), Non-Conformance Reports (NCRs), Corrective Action Reports (CARs), and Material Review Applications (MRAs).
EDMS & Register Maintenance: Operate and update the Electronic Document Management System (EDMS) and maintain accurate master document registers for all incoming/outgoing QA/QC transmittals.
Inspection & Testing Records: Coordinate the registration, distribution, filing, and close-out tracking of site inspection sheets, lab test reports (soil, concrete, asphalt, steel), and third-party test results.
...
QA/QC Document Management: Maintain, log, and organize all QA/QC documentation, including Method Statements, Inspection and Test Plans (ITPs), Request for Inspections (RFIs), Non-Conformance Reports (NCRs), Corrective Action Reports (CARs), and Material Review Applications (MRAs).
EDMS & Register Maintenance: Operate and update the Electronic Document Management System (EDMS) and maintain accurate master document registers for all incoming/outgoing QA/QC transmittals.
Inspection & Testing Records: Coordinate the registration, distribution, filing, and close-out tracking of site inspection sheets, lab test reports (soil, concrete, asphalt, steel), and third-party test results.
...
QA/QC Document Management: Maintain, log, and organize all QA/QC documentation, including Method Statements, Inspection and Test Plans (ITPs), Request for Inspections (RFIs), Non-Conformance Reports (NCRs), Corrective Action Reports (CARs), and Material Review Applications (MRAs).
EDMS & Register Maintenance: Operate and update the Electronic Document Management System (EDMS) and maintain accurate master document registers for all incoming/outgoing QA/QC transmittals.
Inspection & Testing Records: Coordinate the registration, distribution, filing, and close-out tracking of site inspection sheets, lab test reports (soil, concrete, asphalt, steel), and third-party test results.
...
QA/QC Document Management: Maintain, log, and organize all QA/QC documentation, including Method Statements, Inspection and Test Plans (ITPs), Request for Inspections (RFIs), Non-Conformance Reports (NCRs), Corrective Action Reports (CARs), and Material Review Applications (MRAs).
EDMS & Register Maintenance: Operate and update the Electronic Document Management System (EDMS) and maintain accurate master document registers for all incoming/outgoing QA/QC transmittals.
Inspection & Testing Records: Coordinate the registration, distribution, filing, and close-out tracking of site inspection sheets, lab test reports (soil, concrete, asphalt, steel), and third-party test results.
...
Costing Estimation Engineer: Determining best production method based on engineering drawings. Estimate production timing for various process like 3 and 5 axis CNC milling, CNC lathe, Mill-turn and Wire-EDM. Continuously improvement to optimize production methods and costing.
CAM Programming Engineer: Create CAM programs for complex parts for 3 axis CNC milling and CNC Lathe. You are responsible for the selection of the best tool path, cutting tools and cutting strategies. You will design your own production jigs.
New Product Introduction Engineer: Be project manager for implementation of new products in our production. Determine all production specifications for a new product. Liaise with customers if specs are not clear. Confirm production process with engineers from other departments and source processes from outside suppliers if not available within our company. Manage a successful implementation of new products.
...
Costing Estimation Engineer: Determining best production method based on engineering drawings. Estimate production timing for various process like 3 and 5 axis CNC milling, CNC lathe, Mill-turn and Wire-EDM. Continuously improvement to optimize production methods and costing.
CAM Programming Engineer: Create CAM programs for complex parts for 3 axis CNC milling and CNC Lathe. You are responsible for the selection of the best tool path, cutting tools and cutting strategies. You will design your own production jigs.
New Product Introduction Engineer: Be project manager for implementation of new products in our production. Determine all production specifications for a new product. Liaise with customers if specs are not clear. Confirm production process with engineers from other departments and source processes from outside suppliers if not available within our company. Manage a successful implementation of new products.
...
• Provide first-level technical support for ERP other business software, including diagnosis and troubleshooting of issues.• Responsible for maintaining software, applications, and databases.• Design and develop data models, dashboards, reports for Business Intelligence in Microsoft Power BI according to user requirements. • Deploy, maintain, and troubleshoot Robot Process Automation in Microsoft PowerAutomate• Hands-on involvement in development, implementation and testing of new applications, PowerApps, and improvements. • Develop and maintain technical documentation for all designed solutions.• Provide support to users to analyze and troubleshoot issues when necessary.