100+ Technical Drawings Jobs - September 2026 - Urgent Hiring
Showing 189 jobs results for
"technical drawings"
Machine Operator Engraving
MYR1,700 - MYR2,800 Per Month
Jalan TSB 9, 47810
Near Train Station
- Operate and maintain engraving machines to produce high-quality gravure cylinders.
- Monitor machine performance and make adjustments as needed to ensure optimal production.
- Perform routine maintenance and troubleshooting on engraving equipment. ...
Be an early applicant!
Posted
12 days ago
MYR5,000 - MYR8,000 Per Month
Near Train Station
- Plan, coordinate, and oversee electrical project activities from initiation to completion.
- Monitor project progress, timelines, budgets, and ensure smooth project execution.
- Coordinate with clients, consultants, subcontractors, suppliers, and site teams. ...
Posted
23 days ago
CX Testing & Commissioning Engineer
MYR3,000 - MYR10,000 Per Month
Near Train Station
- Plan, execute, and document all testing and commissioning activities.
- Conduct Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), and Integrated System Testing (IST).
- Verify system performance against engineering specifications, drawings, and functional requirements. ...
Be an early applicant!
Posted
11 days ago
MYR2,000 - MYR3,000 Per Month
Fresh Graduates
KL City, WP Kuala Lumpur
Near Train Station
- Set up and operate CNC machines according to drawings, specifications and work instructions.
- Perform machining work to achieve the required dimensions, tolerances and surface finish.
- Read and interpret engineering drawings, technical drawings and machining requirements. ...
Be an early applicant!
Posted
7 days ago
MYR2,800 - MYR3,500 Per Month
- • Manage and monitor project sites and project progress• Coordinate with clients, consultants, subcontractors & internal teams• Provide technical support, troubleshooting & commissioning• Prepare project reports and documentation• Assist with tender preparation, technical proposals & solution design• Support installation, testing, maintenance & post-sales activities• Coordinate equipment installation and monitor material usage
Be an early applicant!
Posted
6 days ago
MYR2,500 - MYR3,600 Per Month
Near Train Station
- Create & edit2D/3D drawings for built-in & loose furniture
- Produce layouts, elevations, sections and detailed drawings
- Calculatematerial quantities & placing order accurately with minimal wastages ...
Be an early applicant!
Posted
7 days ago
MYR2,500 - MYR3,600 Per Month
Near Train Station
- Create & edit2D/3D drawings for built-in & loose furniture
- Produce layouts, elevations, sections and detailed drawings
- Calculatematerial quantities & placing order accurately with minimal wastages ...
Be an early applicant!
Posted
7 days ago
MYR2,500 - MYR3,600 Per Month
Near Train Station
- Create & edit2D/3D drawings for built-in & loose furniture
- Produce layouts, elevations, sections and detailed drawings
- Calculatematerial quantities & placing order accurately with minimal wastages ...
Be an early applicant!
Posted
7 days ago
MYR2,500 - MYR3,600 Per Month
Near Train Station
- Create & edit2D/3D drawings for built-in & loose furniture
- Produce layouts, elevations, sections and detailed drawings
- Calculatematerial quantities & placing order accurately with minimal wastages ...
Be an early applicant!
Posted
7 days ago
MYR2,500 - MYR3,600 Per Month
Near Train Station
- Create & edit2D/3D drawings for built-in & loose furniture
- Produce layouts, elevations, sections and detailed drawings
- Calculatematerial quantities & placing order accurately with minimal wastages ...
Be an early applicant!
Posted
7 days ago
MYR3,000 - MYR5,000 Per Month
- Key Duties & Responsibilities
- Develop, modify and maintain CNC programs for production parts and perform machine setup, including tooling, offsets and machine parameters.
- Read and interpret engineering drawings and prepare 3D drawings/models and related technical information for machining requirements. ...
Be an early applicant!
Posted
8 days ago
MYR2,800 - MYR3,800 Per Month
- Plan, execute, and monitor preventive and corrective maintenance programs for machinery and equipment
- Diagnose and troubleshoot mechanical, electrical, and control system issues to minimize downtime
- Analyze equipment failures and implement corrective actions to prevent recurrence ...
Posted
6 days ago
MYR4,000 - MYR4,500 Per Month
Puncak Alam, Selangor
- Prepare, update, and revise AutoCAD drawings based on project requirements.
- Coordinate with clients, contractors, suppliers, and internal teams on technical issues.
- Assist in project progress, materials, and schedules. ...
Be an early applicant!
Posted
13 days ago
MYR4,000 - MYR4,500 Per Month
Puncak Alam, Selangor
- Prepare, update, and revise AutoCAD drawings based on project requirements.
- Coordinate with clients, contractors, suppliers, and internal teams on technical issues.
- Assist in project progress, materials, and schedules. ...
Be an early applicant!
Posted
13 days ago
CNC Machinist Group Leader
Undisclosed
- Assign daily tasks to team members based on production schedules
- Monitor machine output and workflow to hit production targets
- Track job progress and report delays to the production manager ...
Be an early applicant!
Posted
a month ago
MYR1,800 - MYR3,000 Per Month
+Additional Compensation
Taman Industries Selesa Jaya Balakong, 43300
- Ability to complete job in daily workflow.
- Ensure all work is performed safely and according to company standards and regulations.
- cooperation with team and ensure timely completion of tasks. ...
Be an early applicant!
Posted
5 days ago
MYR2,000 - MYR3,000 Per Month
Fresh Graduates
KL City, WP Kuala Lumpur
Near Train Station
- Perform assembly, installation, testing, repair and maintenance of electronic systems, components and equipment.
- Diagnose and troubleshoot defective electronic products and equipment.
- Perform repair and rework according to approved work instructions, SOPs and quality requirements. ...
Posted
7 days ago
MYR800 - MYR1,200 Per Month
Jalan Neutron, 42700
- Assist senior engineers in designing, developing, and testing mechanical components and systems.
- Conduct research and gather data for engineering projects.
- Prepare technical drawings, specifications, and reports. ...
Posted
a month ago
MYR800 - MYR1,200 Per Month
Jalan Neutron, 42700
- Assist senior engineers in designing, developing, and testing mechanical components and systems.
- Conduct research and gather data for engineering projects.
- Prepare technical drawings, specifications, and reports. ...
Posted
a month ago
MYR800 - MYR1,200 Per Month
Jalan Neutron, 42700
- Assist senior engineers in designing, developing, and testing mechanical components and systems.
- Conduct research and gather data for engineering projects.
- Prepare technical drawings, specifications, and reports. ...
Posted
a month ago
Up to MYR3,500 Per Month
- Understand and manage daily site progress against the master construction program.
- Coordinate site access, manpower, tools, and material delivery for subcontractors and direct labor.
- Resolve design clashes and coordinate shop drawings between different trades, and work with the BIM drafter to solve these before bringing them to the site for installation. ...
Posted
12 days ago
MYR2,200 - MYR2,500 Per Month
Fresh Graduates
Petaling, WP Kuala Lumpur
Near Train Station
- Responsible for the installation, commissioning, and maintenance of on-site equipment and systems to ensure their normal operation.
- Perform daily equipment inspections, troubleshooting, and repair work according to technical manuals and customer requirements.
- Respond to customer service requests, provide technical support and solutions, and handle on-site emergencies. ...
Posted
6 days ago
MYR3,000 - MYR5,000 Per Month
Near Train Station
- Candidate must possess at least diploma level in engineering and other relevant qualifications.
- Required skill(s): AutoCad, Revit, BIM, MS Office, etc.
- Required language: BM, English. ...
Posted
19 days ago
Up to MYR3,500 Per Month
Near Train Station
- Understand and manage daily site progress against the master construction program.
- Coordinate site access, manpower, tools, and material delivery for subcontractors and direct labor.
- Resolve design clashes and coordinate shop drawings between different trades, and work with the BIM drafter to solve these before bringing them to the site for installation. ...
Posted
12 days ago
MYR5,000 - MYR5,500 Per Month
- Implement and break down monthly production plans to ensure production targets are achieved on time.
- Train, supervise, and manage CNC operators, including guiding new employees on operating procedures, work standards, and safety requirements.
- Oversee the daily maintenance and upkeep of CNC machines. ...
Posted
a month ago
SGD2,000 - SGD2,500 Per Month
Sembawang (NS11), Sembawang (NS11)
- Perform mechanical and electrical assembly of modules and components for automation equipment and machinery.
- Prepare cables, assemble control panels, and perform electrical wiring and routing.
- Carry out machine calibration, I/O checks, testing and troubleshooting. ...
Posted
12 days ago
Undisclosed
- Set up and operate manual surface grinders (brand Okamoto) from the process of wheels selection, fixture and parameter to the grinding process.
- Independently operate grinding machine to grind any metal workpieces to drawing specifications in term of dimension & appearance while ensure high-quality outcome. Tolerance of the part up to 0.002mm.
- Develop and refine grinding parameters to improve cycle time and surface quality. Collaborate with NPI engineer on new product introductions. ...
Be an early applicant!
Posted
2 months ago
MYR10,000 - MYR20,000 Per Month
- Manage and mentor a multi-racial team of discipline leads (Mechanical, CDA, Electrical, Exhaust, UPW, PDS, Bulk & Special Gas, Chemical, Slurry, I&C, etc.) across Penang and Kulim sites.
- Conduct regular 1:1s, provide technical career coaching, and oversee performance reviews in line with Malaysian labor practices.
- Lead hook-up design interface coordination with base built system, cleanroom interior decoration and Tool moving-in schedule, ensuring alignment of space, clear height, floor loading, vibration, cleanliness and connection interfaces with Tool requirements. ...
Be an early applicant!
Posted
2 days ago
MYR2,500 - MYR4,500 Per Month
- Set up and prepare 3-axis and 4-axis CNC milling machines for production.
- Install tools, fixtures, and workpieces according to technical drawings and specifications.
- Load, verify, and adjust CNC programs before production. ...
Be an early applicant!
Posted
12 days ago