- Singapore
Kerja Sepenuh Masa FACADE SURVEYOR, Gaji tinggi SGD 4,500 di VSS FACADE INSTALLER PTE. LTD. - Maukerja
Kongsi
Simpan
Lokasi Kerja
Penerangan Kerja
Tanggungjawab
Scope of Work
1. Pre-Construction & Survey Control
Control Network Establishment:
Transferring main site datums and gridlines from the main contractor to the specific floors requiring facade installation.
Benchmark Creation:
Setting up local, high-accuracy benchmarks and reference points on every floor using a high-precision total station.
Instrument Calibration:
Calibrating and verifying total stations, prisms, and laser plummets daily to maintain sub-millimeter accuracy.
2. As-Built Surveys (Pre-Installation Verification)
Structure Mapping:
Surveying the as-built concrete slabs, columns, and beams to identify deviations from the structural design.
Deflection Checking:
Measuring floor-to-floor heights and edge-of-slab profiles to spot any sagging, tilting, or structural variances.
Conflict Identification:
Highlighting variations that exceed allowable tolerances to engineering teams before facade fabrication or installation begins.
3. Setting Out & Layout Marking
Bracket Positioning:
Marking the exact 3D coordinates (X, Y, Z axes) for facade brackets, anchors, and embedding plates on the concrete structure.
Plumb & Alignment Lines:
Projecting precise vertical (plumb) and horizontal alignment lines along the building's exterior face.
3D Coordinate Control:
Utilizing coordinates extracted directly from CAD/BIM models to guide the installation crew.
4. Progress Monitoring & Quality Control
As-Installed Verification:
Surveying facade panels immediately after installation to verify they are perfectly level, plumb, and aligned with the design grid.
Tolerance Monitoring:
Monitoring clearance gaps and joints between panels to ensure uniform thermal expansion space.
Deformation Tracking:
Performing periodic checks on installed facades to detect any movement or displacement caused by construction loads.
5. Data Management & Reporting
BIM/CAD Integration:
Downloading digital layout points from BIM software (like Revit) into the total station, and uploading field data back to the office.
As-Built Documentation:
Generating comprehensive survey reports, deviation maps, and "as-built" drawings for client sign-off.
Discrepancy Reporting:
Raising Immediate Corrective Action (ICA) reports when structural or facade deviations exceed design limits.
6.Adherence to safety practices in the workplace.
1. Pre-Construction & Survey Control
Control Network Establishment:
Transferring main site datums and gridlines from the main contractor to the specific floors requiring facade installation.
Benchmark Creation:
Setting up local, high-accuracy benchmarks and reference points on every floor using a high-precision total station.
Instrument Calibration:
Calibrating and verifying total stations, prisms, and laser plummets daily to maintain sub-millimeter accuracy.
2. As-Built Surveys (Pre-Installation Verification)
Structure Mapping:
Surveying the as-built concrete slabs, columns, and beams to identify deviations from the structural design.
Deflection Checking:
Measuring floor-to-floor heights and edge-of-slab profiles to spot any sagging, tilting, or structural variances.
Conflict Identification:
Highlighting variations that exceed allowable tolerances to engineering teams before facade fabrication or installation begins.
3. Setting Out & Layout Marking
Bracket Positioning:
Marking the exact 3D coordinates (X, Y, Z axes) for facade brackets, anchors, and embedding plates on the concrete structure.
Plumb & Alignment Lines:
Projecting precise vertical (plumb) and horizontal alignment lines along the building's exterior face.
3D Coordinate Control:
Utilizing coordinates extracted directly from CAD/BIM models to guide the installation crew.
4. Progress Monitoring & Quality Control
As-Installed Verification:
Surveying facade panels immediately after installation to verify they are perfectly level, plumb, and aligned with the design grid.
Tolerance Monitoring:
Monitoring clearance gaps and joints between panels to ensure uniform thermal expansion space.
Deformation Tracking:
Performing periodic checks on installed facades to detect any movement or displacement caused by construction loads.
5. Data Management & Reporting
BIM/CAD Integration:
Downloading digital layout points from BIM software (like Revit) into the total station, and uploading field data back to the office.
As-Built Documentation:
Generating comprehensive survey reports, deviation maps, and "as-built" drawings for client sign-off.
Discrepancy Reporting:
Raising Immediate Corrective Action (ICA) reports when structural or facade deviations exceed design limits.
6.Adherence to safety practices in the workplace.
Peringatan Penting
Jangan pernah kongsikan maklumat bank atau kad kredit anda semasa memohon pekerjaan. Elakkan membuat sebarang pembayaran atau mengisi survey yang tidak berkaitan. Jika ada yang mencurigakan, sila laporkan iklan pekerjaan ini segera.
Lebih Lanjut