- Singapore Singapore
Kerja Sepenuh Masa QA-QC Engineer, Gaji tinggi SGD 5,500 di YAMATO ENERGY PTE. LTD. - Maukerja
Kongsi
Simpan
Lokasi Kerja
Penerangan Kerja
Tanggungjawab
Job Responsibilities:
Ø Developing and implementing quality control systems.
Ø Establish quality program and project Inspection and Test Plan (ITP) for projects.
Ø Responsible for QA/QC documents of the complete project, including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents.
Ø Develop and determine all standards to perform inspections and tests on all procedures, oversee all testing methods, and maintain high-quality standards for all processes.
Ø Perform incoming material inspection and prepare quality inspection report.
Ø Inspectingand testing materials, equipment, process and products to ensure quality specification are met.
Ø Conduct the Line check as per P&ID, ISO Drawings & Issue the Punch list.
Ø Document review, final line check, issue punch list for piping packages and
Witness the hydro testing and pneumatic testing.
Ø Conduct the system walk down asper markup system boundaries.
Ø Issue the punch list for during walk down registered.
Ø Conduct the painting and insulation inspection.
Ø Witnessing the punch list rectifications.
Ø Compile the complete QC documents and submit to Client.
Ø Review of contractor’s quality manual, inspection test plan, shop drawings, welding procedure specifications, welding procedure qualification records (WPS &PQR), welder performance certificates, NDT procedures, qualification of NDT personnel, work instructions, repair method statement etc.
Ø Perform fit-up inspection and monitor all stages of welding.
Ø Witness non-destructive testing such as ultrasonic testing (UT), magnetic particle testing (MT) & liquid penetrant testing (PT) performed by NDT companies.
Ø Perform visual inspection on surface preparation before painting.
Ø Issue inspector’s release notice for completed structures.
Ø Prepare of inspection reports.
Ø Preparation and Implementation of the thickness & Hydro test Calculations, Welder qualification certificates, Project Quality Plan (PQP), Inspection Test plan (ITP) as per Specification, codes and client requirement.
Ø Monitor the Project Schedules, NDT Percentage, Review the PWHT Chart & Calibration Certificates.
Ø Inspection of welding consumables as per ASME Sec-II Part-C and ensuring the Proper Storage and Handling of Welding Consumables.
Ø Structural welding inspection, Dimensional verification, material and
Consumable Traceability.
Ø Supervise and monitor the field QC inspectors for visual inspection, NDT
Requirements and NCR follow-up.
Ø Implement QA/QC procedures for process plant construction.
Ø Conduct inspections for:
Ø Degree in Engineering preferred. Related disciplines may be considered
Ø Working knowledge of welding procedures and NDT techniques will be an added advantage
Ø Experience with quality testing machines and systems.
Ø Ability to interpret technical specifications and drawings.
Ø At least 5years of relevant working experience as QA/QC engineer.
Ø Must have CSWIP Welding Inspector Certificate Proficiency.
Ø Familiar with ASME B31.1, B31.3, B31.8, B16.5, B16.47, ASME sec V, DNV, ASME sec VIII div 1, ASME sec IX, API 570, API 571, API 574 & API 1104 & AWS D1.1, BS5950, ISO 5817.
Ø Handson experience in NDT – UT, MT, PT, RT and Radiographic interpretation
Ø Knowledge in measuring devices (Vernier caliper, internal and external micrometer, ring groove ball gauge, Brinell hardness tester, depth gauge, wall thickness gauge)
Yamato Energy Pte. Ltd. provides clean, clear and complete energy solutions according to its customers’ needs. Since inception in 2016, its business focuses are on the development of Renewable Energy (Solar, Bio-Gas & Bio-Mass) based Heat & Power Solutions, oil & gas Co-generation / Tri-generation, high efficiency boilers, plant construction & integrations etc. Our core proficiencies are the provision of Engineering, Procurement, Construction & Commissioning (EPCC) Services of distributed small to medium-sized fully integrated Turn-Key Energy & Utility Solutions on Waste Heat Recovery Systems, Co-Generation (combined Heat & Power), Tri-Generation (combined Cooling, Heating & Power) and Combined-Cycle applications, in industrial & commercial markets.
Our business fundamentals are energy efficiency, cost effectiveness, reliability, longevity, simplicity and strict adherence to environmental compliance. Yamato Energy also strives for supreme robustness and is desired to engineer customized & ideal energy solutions and plant systems without compromises.
Ø Developing and implementing quality control systems.
Ø Establish quality program and project Inspection and Test Plan (ITP) for projects.
Ø Responsible for QA/QC documents of the complete project, including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents.
Ø Develop and determine all standards to perform inspections and tests on all procedures, oversee all testing methods, and maintain high-quality standards for all processes.
Ø Perform incoming material inspection and prepare quality inspection report.
Ø Inspectingand testing materials, equipment, process and products to ensure quality specification are met.
Ø Conduct the Line check as per P&ID, ISO Drawings & Issue the Punch list.
Ø Document review, final line check, issue punch list for piping packages and
Witness the hydro testing and pneumatic testing.
Ø Conduct the system walk down asper markup system boundaries.
Ø Issue the punch list for during walk down registered.
Ø Conduct the painting and insulation inspection.
Ø Witnessing the punch list rectifications.
Ø Compile the complete QC documents and submit to Client.
Ø Review of contractor’s quality manual, inspection test plan, shop drawings, welding procedure specifications, welding procedure qualification records (WPS &PQR), welder performance certificates, NDT procedures, qualification of NDT personnel, work instructions, repair method statement etc.
Ø Perform fit-up inspection and monitor all stages of welding.
Ø Witness non-destructive testing such as ultrasonic testing (UT), magnetic particle testing (MT) & liquid penetrant testing (PT) performed by NDT companies.
Ø Perform visual inspection on surface preparation before painting.
Ø Issue inspector’s release notice for completed structures.
Ø Prepare of inspection reports.
Ø Preparation and Implementation of the thickness & Hydro test Calculations, Welder qualification certificates, Project Quality Plan (PQP), Inspection Test plan (ITP) as per Specification, codes and client requirement.
Ø Monitor the Project Schedules, NDT Percentage, Review the PWHT Chart & Calibration Certificates.
Ø Inspection of welding consumables as per ASME Sec-II Part-C and ensuring the Proper Storage and Handling of Welding Consumables.
Ø Structural welding inspection, Dimensional verification, material and
Consumable Traceability.
Ø Supervise and monitor the field QC inspectors for visual inspection, NDT
Requirements and NCR follow-up.
Ø Implement QA/QC procedures for process plant construction.
Ø Conduct inspections for:
- Piping installation and welding
- Equipment installation and alignment
Ø Degree in Engineering preferred. Related disciplines may be considered
Ø Working knowledge of welding procedures and NDT techniques will be an added advantage
Ø Experience with quality testing machines and systems.
Ø Ability to interpret technical specifications and drawings.
Ø At least 5years of relevant working experience as QA/QC engineer.
Ø Must have CSWIP Welding Inspector Certificate Proficiency.
Ø Familiar with ASME B31.1, B31.3, B31.8, B16.5, B16.47, ASME sec V, DNV, ASME sec VIII div 1, ASME sec IX, API 570, API 571, API 574 & API 1104 & AWS D1.1, BS5950, ISO 5817.
Ø Handson experience in NDT – UT, MT, PT, RT and Radiographic interpretation
Ø Knowledge in measuring devices (Vernier caliper, internal and external micrometer, ring groove ball gauge, Brinell hardness tester, depth gauge, wall thickness gauge)
Yamato Energy Pte. Ltd. provides clean, clear and complete energy solutions according to its customers’ needs. Since inception in 2016, its business focuses are on the development of Renewable Energy (Solar, Bio-Gas & Bio-Mass) based Heat & Power Solutions, oil & gas Co-generation / Tri-generation, high efficiency boilers, plant construction & integrations etc. Our core proficiencies are the provision of Engineering, Procurement, Construction & Commissioning (EPCC) Services of distributed small to medium-sized fully integrated Turn-Key Energy & Utility Solutions on Waste Heat Recovery Systems, Co-Generation (combined Heat & Power), Tri-Generation (combined Cooling, Heating & Power) and Combined-Cycle applications, in industrial & commercial markets.
Our business fundamentals are energy efficiency, cost effectiveness, reliability, longevity, simplicity and strict adherence to environmental compliance. Yamato Energy also strives for supreme robustness and is desired to engineer customized & ideal energy solutions and plant systems without compromises.
Peringatan Penting
Jangan pernah kongsikan maklumat bank atau kad kredit anda semasa memohon pekerjaan. Elakkan membuat sebarang pembayaran atau mengisi survey yang tidak berkaitan. Jika ada yang mencurigakan, sila laporkan iklan pekerjaan ini segera.
Lebih Lanjut