5,000+ Juruteknik Jobs in Malaysia | Job Vacancies | October 2026 | Maukerja

Showing 50,085 jobs results for "juruteknik"
Never miss any updates for Juruteknik jobs

Malaysia

  • Perform routine inspections and preventive maintenance on equipment to prevent breakdowns.
  • Diagnose and troubleshoot mechanical, electrical, and electronic equipment issues.
  • Repair or replace faulty components and ensure machines operate efficiently. ...
Posted
8 days ago

Fastrain Technology Malaysia Sdn Bhd

Prai

  • Develop and implement the annual Industrial Hygiene Programme.
  • Establish annual Industrial Hygiene objectives, KPIs, and action plans.
  • Develop policies, procedures, and work instructions related to industrial hygiene. ...
Posted
8 days ago

Fastrain Technology Malaysia Sdn Bhd

Prai

  • Perform FA laboratory tests according to assigned FA requests and approved test procedures
  • Conduct visual and microscopic inspection of PCB/PCBA and electronic components
  • Conduct testing using appropriate laboratory equipment based on the assigned FA requirement ...
Posted
8 days ago
  • Perform routine and preventive maintenance on moulds as per schedule.
  • Troubleshoot, diagnose, and repair mould-related issues (e.g., flash, short shot, wear and tear).
  • Disassemble, clean, inspect, and reassemble mould components. ...
Posted
8 days ago

Alam Dingin Air Conditioning Engineering Sdn Bhd

  • Under supervision, the successful candidate will perform journey-level work on university HVAC systems and equipment. This work includes installation, modification, maintenance and repair as required. Work is done using necessary hand tools and testing equipment. The incumbent analyzes HVAC systems and controls to determine problems, and initiates repairs as directed by the supervisor.
  • Installs, maintains, and repairs heating, ventilating, and air conditioning systems.
  • Monitors HVAC systems and operations, and ensures that routine preventive maintenance is performed according to established schedules and standards. ...
Posted
8 days ago

Singapore

Posted
8 days ago

Edaran Otomobil Nasional Berhad

  • Responsible for servicing/repairing Zeekr brand of vehicles.
  • Responsible to ensure core service/repair procedures are fully adhered to.
  • Perform service and repairs of the highest quality within the given time frame. ...
Posted
8 days ago

Globalcomm Solutions Sdn Bhd

  • ELV: 3 years (Preferred)
  • Key Responsibilities:
  • 1) Installation & Configuration ...
Posted
8 days ago

Globalcomm Solutions Sdn Bhd

  • Install, configure, and maintain network devices (routers, switches, firewalls, etc.)
  • Monitor network performance and troubleshoot connectivity issues
  • Ensure network security and data protection ...
Posted
8 days ago
  • To perform installation, maintenance, troubleshooting, and technical support activities to ensure hardware, equipment, systems, and infrastructure operate efficiently and reliably.
  • To ensure all project implementation, maintenance, and service tasks are completed safely, accurately, and within the agreed timeline.
  • To provide technical support and problem resolution to customers and internal stakeholders while maintaining high service quality standards. ...
Posted
8 days ago
  • Hand on setup the equipment and process during engineering activities such as engineering evaluations.
  • Evaluation report compilation and initial data analysis.
  • Support Yield & Quality KPI improvement through Lean Six Sigma approach. ...
Posted
8 days ago

Malaysia

  • ️Key Responsibilities:
  • • Perform debugging and repair on PCBA boards.
  • • Carry out functional testing to ensure product quality and performance. ...
Posted
8 days ago
  • Support on Tester Handling (Advantest V93k), Linux Programming, Lot Disposition & Yield analytic.
  • Support NPI Test Program manual testing with engineering guideline.
  • Perform low yield/ QA verification and lot disposition. ...
Posted
8 days ago

Malaysia

  • Fresh graduate / 1-2 years experience in Calibration
  • Diploma in Science and engineering or equivalent
  • Reports to the Calibration Engineer/Validation Manager on all matters pertaining to measuring and monitoring devices (MMD) troubleshooting, in-house and external calibration. ...
Posted
8 days ago

INTI International College Subang Jaya

  • Keep the laboratory in order at all times.
  • Prepare and keep documentation, i.e. prepare manual for all courses, maintain and record student attendance and items assigned for laboratory classes.
  • Keep track of inventory and ensure timely requisition of items needed. ...
Posted
8 days ago
  • POSITION SUMMARY
  • Inspect, repair, and maintain HVAC, air quality control, and refrigeration equipment. Maintain and conduct daily inspections of the mechanical plant. Monitor and control property temperature. Monitor and analyze energy and utilities usage. Calibrate all controls, gauges, meters, and other equipment. Assemble, install, test, repair, and maintain electrical systems or electronic wiring. Assemble, install, and maintain pipe assemblies, fittings, valves, etc. Perform routine pool and spa maintenance.
  • Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards and anticipate and address guests’ service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Reach overhead and below the knees. Move in confined or elevated spaces. Move over sloping, uneven, or slippery surfaces. Move up and down stairs, service ramps and/or a ladder. Grasp, turn, and manipulate objects of varying size and weight. Assist with moving, lifting, carrying, and placing of objects weighing in excess of 100 pounds. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Perform other reasonable job duties as requested by Supervisors. ...
Posted
8 days ago
  • Repair and maintain production machines and equipment.
  • Troubleshoot electrical, PLC, hydraulic, pneumatic, and mechanical problems.
  • Perform preventive maintenance to reduce machine breakdowns. ...
Posted
8 days ago
  • Responsibilities for operation, inspection and maintenance of electrical system in the Feedmill Plant.
  • Perform routine inspection of switch boards, MCC Panels, Motor and electrical distribution system.
  • Troubleshoot and rectify electrical faults to minimize downtinue. ...
Posted
8 days ago

Prai

  • Machine Operation: Set up, start, and run production line machinery, and load raw materials into equipment.
  • Process Monitoring: Watch gauges, screens, and dials to track production speed, output, and system stability.
  • Quality Control: Output to meet company standards. ...
Posted
8 days ago
  • Minimum 2–3 years of maintenance experience in a manufacturing or industrial environment.
  • Unlimited access to premium coffee & tea — become your own Barista!
Posted
8 days ago
  • Diagnose, troubleshoot and repair truck transmission systems.
  • Carry out diagnostic and troubleshooting work as assigned by the Supervisor.
  • Perform inspection, servicing, maintenance and repair works according to the required standards. ...
Posted
8 days ago
  • Support IC testing, characterization & validation
  • Support HTOL (High-Temperature Operating Life) and reliability testing
  • Operate ATE and electronic test equipment ...
Posted
8 days ago

KL City

  • Team Activities
  • Team Birthday celebration
  • Medical insurance coverage/allowance ...
Posted
8 days ago

Malaysia

  • Assist the Maintenance team with daily inspection and maintenance of hotel facilities, equipment, and building systems.
  • Assist in basic electrical, plumbing, air-conditioning, and general maintenance works.
  • Conduct routine checks of guest rooms, public areas, and hotel facilities. ...
Posted
8 days ago
  • Tool & Equipment Management: Plan, coordinate, and execute the complete mobilization and demobilization (mob/demob) of project tools, equipment, and consumables. Ensure accurate manifesting, load-out checks, and post-campaign inventory reconciliation.
  • Manpower Arrangement: Coordinate deployment schedules for site crews. Verify that all personnel have valid offshore medicals, BOSIET, OGSP, and required trade certifications prior to mobilization.
  • Resource Forecasting: Work closely with the Project Management Team (PMT) to identify the specific tools (e.g., torqueing equipment, lifting gear) and personnel required for upcoming workpacks. ...
Posted
8 days ago
  • Perform scheduled preventive maintenance on machinery, equipment, electrical systems, and facilities.
  • Carry out corrective maintenance and repairs when equipment breakdowns occur.
  • Inspect machines and equipment regularly to identify potential problems. ...
Posted
8 days ago
  • Perform scheduled preventive maintenance on machinery, equipment, electrical systems, and facilities.
  • Carry out corrective maintenance and repairs when equipment breakdowns occur.
  • Inspect machines and equipment regularly to identify potential problems. ...
Posted
8 days ago

Hawk Soon Hin Industries Sdn Bhd (OSK Filter)

Simpang Renggam

  • Attend and follow up daily manufacturing process and machine abnormalities.
  • Support the Process Engineer in troubleshooting production and process-related issues.
  • Record machine/process problems, findings, actions and follow-up status. ...
Posted
8 days ago
  • Perform routine preventive maintenance on manufacturing equipment and machinery.
  • Troubleshoot and repair equipment breakdowns to minimize production downtime.
  • Support equipment setup, installation, calibration, and commissioning. ...
Posted
8 days ago
  • Assist with loading, unloading, delivery, and transportation of sauna rooms, wellness products, equipment, and materials.
  • Assist the Technician with installation, assembly, dismantling, and relocation of products and equipment.
  • Assist with basic wiring, cable connection, and other technical work under the Technician’s supervision. ...
Posted
8 days ago

Job searches related to “Juruteknik”