37 Semiconductor Manufacturing Jobs in Malaysia | Job Vacancies | October 2026 | Maukerja
Showing 37 jobs results for
"semiconductor manufacturing"
Undisclosed
+Additional Compensation
Fresh Graduates
- Operate electropolishing machines and related equipment safely and efficiently.
- Prepare metal parts for electropolishing process, including cleaning and inspection.
- Monitor chemical concentration, temperature, voltage, and process timing. ...
Posted
a month ago
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Perform Failure Analysis & Fault Isolation (FAFI) to determine defect modes and root causes.
- Conduct electrical failure analysis to identify component defects and support factory rejection cases.
- Carry out validation and fault isolation using tools such as Parametric Analyzer, Keithley meter, iTDR, SEM/EDX, and IRLC. ...
Be an early applicant!
Posted
a month ago
MYR1,700 - MYR2,500 Per Month
Fresh Graduates
Petaling, WP Kuala Lumpur
Near Train Station
- SKM holders (preferably technical) / SPM with manufacturing experience
- 1 Month FREE Training – Shah Alam
- Allowance: RM1,700 + EPF, SOCSO & EIS ...
Posted
2 months ago
MYR2,200 - MYR2,800 Per Month
+Additional Compensation
- Salary: RM2200 - RM2800
- Benefits: Allowances (~$500) + 15AL + OT
- Working Days: Monday–Friday ...
Posted
2 months ago
MYR5,000 - MYR6,000 Per Month
- In-Process Patrol Inspection: Conduct patrol inspections of production materials, semi-finished products, operating procedures, and process parameters according to SOP and quality standards.
- Process Risk Identification & Prevention: Identify potential quality risks related to process changes, personnel, equipment, materials, and production environment, and implement preventive measures.
- Quality Abnormality Handling: Identify defective products and process deviations, issue abnormality notifications, and follow up on containment, root cause analysis, and corrective actions. ...
Be an early applicant!
Posted
4 hours ago
MYR2,600 - MYR4,000 Per Month
- Lead and supervise manufacturing operators and line leaders to achieve production output, quality, and cycle time targets.
- Ensure compliance with cleanroom protocols, safety regulations, and quality standards.
- Participate in process improvement, cost reduction, yield enhancement, and RPA projects. ...
Posted
15 days ago
MYR2,200 - MYR2,800 Per Month
+Additional Compensation
Fresh Graduates
- Assemble mechanical, electrical, pneumatic and robotic components
- Follow engineering drawings, BOMs and work instructions
- Perform wiring, alignment, calibration and testing ...
Posted
2 months ago
MYR3,800 - MYR5,000 Per Month
Near Train Station
- The QC Officer is responsible for making sure Methodcon's work is completed according to the required drawings, specifications, quality standards and company procedures.
- This is an ownership role. The QC Officer is expected to build and improve the QC workflow, monitor the work, maintain records, identify problems and keep management informed.
- The QC Officer should not wait to be told what to check or what to follow up on. ...
Posted
8 days ago
MYR8,000 - MYR8,500 Per Month
- Production Line Management
- - Manage daily precision electronics assembly and testing operations.
- - Lead and supervise 10–30 operators and technicians. ...
Be an early applicant!
Posted
2 days ago
SGD2,000 - SGD4,000 Per Month
+Additional Compensation
Fresh Graduates
Singapore, Singapore
- Maintain a clean, safe workspace and follow all safety protocols.
- Interpret engineering drawings, electrical schematics, and manufacturing manuals to assemble machines accurately.
- Troubleshoot electrical controls using tools such as multimeters and amp meters. ...
• Minimum 1 to 3 years of experience in semiconductor or manufacturing industries.
• Ability to read and interpret technical drawings
+14
Posted
9 days ago
SGD2,300 - SGD2,800 Per Month
Singapore, Singapore
- Operate machines and equipment according to required specifications and ensure all materials are readily available
- Support continuous improvement initiatives and assigned projects
- Work in a team environment to support day-to-day operations, perform preliminary troubleshooting of machines and equipment, and escalate issues as required to minimize production disruption. ...
Posted
a month ago
MYR2,500 - MYR3,500 Per Month
+Additional Compensation
- Perform mechanical, electrical and electro-mechanical assembly work.
- Assemble modules, wiring, pneumatic components and related parts according to work instructions.
- Follow engineering drawings, schematics, BOMs and work instructions. ...
Posted
2 months ago
SGD2,000 - SGD6,000 Per Month
Singapore, Singapore
- Minimum 3-5 years of quality control experience in CNC machining or precision manufacturing environments.
- Proven exposure to diverse materials such as plastics, rubbers, steels, aluminum, and rubber molding.
- Ability to speak and read Mandarin, as may need to deal with Mandarin-speaking stakeholders. ...
Posted
a month ago
MYR2,200 - MYR3,000 Per Month
+Additional Compensation
Fresh Graduates
- Day: 7:00 AM – 4:00 PM
- Noon: 4:00 PM – 1:00 AM
- Night: 11:00 PM – 7:30 AM ...
Posted
2 months ago
MYR8,000 - MYR10,000 Per Month
- Own the overall NPI program plan, milestone schedule, deliverables, dependencies, and execution timeline from prototype through HVM release.
- Define program scope, execution priorities, ownership, escalation paths, and phase-gate deliverable to ensure clear accountability across functions.
- Drive regular program reviews to track progress, risks, blockers, recovery actions, and decision requirements against committed milestones. - Prepare and govern phase-gate readiness reports to support qualification release, customer commitments, and transition to high-volume manufacturing. ...
Be an early applicant!
Posted
12 days ago
MYR4,000 - MYR4,200 Per Month
- Lead and supervise production team members during daily operations.
- Ensure production targets and quality standards are achieved.
- Monitor manpower allocation and production workflow. ...
Posted
a month ago
MYR4,000 - MYR4,200 Per Month
- Lead and supervise production team members during daily operations.
- Ensure production targets and quality standards are achieved.
- Monitor manpower allocation and production workflow. ...
Posted
a month ago
MYR4,000 - MYR4,200 Per Month
- Lead and supervise production team members during daily operations.
- Ensure production targets and quality standards are achieved.
- Monitor manpower allocation and production workflow. ...
Posted
a month ago
MYR3,500 - MYR5,000 Per Month
13600 Perai, Perai
- Assist in the creation and maintenance of production schedules to meet customer demand and optimize resource utilization.
- Collaborate with production supervisors and team leads to monitor daily production progress and identify potential bottlenecks.
- Gather and analyze production data, including output, scrap rates, and lead times, to support continuous improvement initiatives. ...
Posted
2 months ago
SGD2,000 - SGD4,000 Per Month
+Additional Compensation
Singapore, Singapore
- Maintain a clean, safe workspace and follow all safety protocols.
- Interpret engineering drawings, electrical schematics, and manufacturing manuals to assemble machines accurately.
- Troubleshoot electrical controls using tools such as multimeters and amp meters. ...
Posted
a month ago
MYR2,600 - MYR4,000 Per Month
- Lead and supervise manufacturing operators and line leaders to achieve production output, quality, and cycle time targets.
- Ensure compliance with cleanroom protocols, safety regulations, and quality standards.
- Participate in process improvement, cost reduction, yield enhancement, and RPA projects. ...
Posted
23 days ago
Undisclosed
+Additional Compensation
Fresh Graduates
- Operate electropolishing machines and related equipment safely and efficiently.
- Prepare metal parts for electropolishing process, including cleaning and inspection.
- Monitor chemical concentration, temperature, voltage, and process timing. ...
Posted
a month ago
Undisclosed
+Additional Compensation
Fresh Graduates
- Operate electropolishing machines and related equipment safely and efficiently.
- Prepare metal parts for electropolishing process, including cleaning and inspection.
- Monitor chemical concentration, temperature, voltage, and process timing. ...
Posted
a month ago
MYR2,600 - MYR4,000 Per Month
- Lead and supervise manufacturing operators and line leaders to achieve production output, quality, and cycle time targets.
- Ensure compliance with cleanroom protocols, safety regulations, and quality standards.
- Participate in process improvement, cost reduction, yield enhancement, and RPA projects. ...
Posted
23 days ago
MYR2,600 - MYR4,000 Per Month
- Lead and supervise manufacturing operators and line leaders to achieve production output, quality, and cycle time targets.
- Ensure compliance with cleanroom protocols, safety regulations, and quality standards.
- Participate in process improvement, cost reduction, yield enhancement, and RPA projects. ...
Posted
23 days ago
MYR2,600 - MYR4,000 Per Month
- Lead and supervise manufacturing operators and line leaders to achieve production output, quality, and cycle time targets.
- Ensure compliance with cleanroom protocols, safety regulations, and quality standards.
- Participate in process improvement, cost reduction, yield enhancement, and RPA projects. ...
Posted
23 days ago
MYR3,500 - MYR5,000 Per Month
13600 Perai, Perai
- Assist in the creation and maintenance of production schedules to meet customer demand and optimize resource utilization.
- Collaborate with production supervisors and team leads to monitor daily production progress and identify potential bottlenecks.
- Gather and analyze production data, including output, scrap rates, and lead times, to support continuous improvement initiatives. ...
Posted
2 months ago
MYR3,500 - MYR5,000 Per Month
13600 Perai, Perai
- Assist in the creation and maintenance of production schedules to meet customer demand and optimize resource utilization.
- Collaborate with production supervisors and team leads to monitor daily production progress and identify potential bottlenecks.
- Gather and analyze production data, including output, scrap rates, and lead times, to support continuous improvement initiatives. ...
Posted
2 months ago
MYR5,000 - MYR6,000 Per Month
- In-Process Patrol Inspection: Conduct patrol inspections of production materials, semi-finished products, operating procedures, and process parameters according to SOP and quality standards.
- Process Risk Identification & Prevention: Identify potential quality risks related to process changes, personnel, equipment, materials, and production environment, and implement preventive measures.
- Quality Abnormality Handling: Identify defective products and process deviations, issue abnormality notifications, and follow up on containment, root cause analysis, and corrective actions. ...
Be an early applicant!
Posted
10 days ago
MYR5,000 - MYR6,000 Per Month
- In-Process Patrol Inspection: Conduct patrol inspections of production materials, semi-finished products, operating procedures, and process parameters according to SOP and quality standards.
- Process Risk Identification & Prevention: Identify potential quality risks related to process changes, personnel, equipment, materials, and production environment, and implement preventive measures.
- Quality Abnormality Handling: Identify defective products and process deviations, issue abnormality notifications, and follow up on containment, root cause analysis, and corrective actions. ...
Be an early applicant!
Posted
10 days ago