Technician Jobs in Kulim - September 2026 - Urgent Hiring

Showing 332 jobs results for "technician" in Kulim
Never miss any updates for Technician jobs in Kulim
MYR4,500 - MYR7,000 Per Month
  • Develop, monitor, and improve manufacturing processes within clean room environments.
  • Ensure compliance with clean room protocols, safety standards, and quality requirements.
  • Analyze production/process issues and implement corrective and preventive actions ...
Mechanical Engineering Process Engineering
+3
Posted
6 days ago
premium banner
MYR2,300 - MYR3,300 Per Month
  • Perform daily, monthly, 3/6 monthly preventative maintenance (PM) on ATE testers, handlers, and contactors.
  • Clean and replace consumable parts like contactor pins, sockets, and indexers.
  • Perform routine calibration of the test system’s instruments (voltage sources, digital pins, parametric measurement units). ...
Posted
3 days ago
MYR3,000 - MYR5,500 Per Month
  • Install, commission, maintain, and troubleshoot semiconductor equipment.
  • Perform preventive and corrective maintenance at customer sites.
  • Diagnose machine issues and provide effective technical solutions. ...
Posted
13 days ago
MYR1,700 - MYR1,900 Per Month
  • Assemble electrical or electronic systems and support structures installing components, units, subassemblies, wiring, crimping, soldering, plugging stripping, routing, inspecting and potting.
  • Read and interpret schematic drawings, diagrams, blueprints, specifications, work orders, and reports in order to determine materials requirements and assembly instructions.
  • Adjust, repair or replace electrical or electronic component parts to correct defects and to ensure conformance to specifications. ...
Machine Operation Quality Control
+4
Posted
6 days ago
MYR1,800 - MYR2,000 Per Month
  • To identify the priority of work orders to process per instructions of Production Supervisor/Lead or Quality Control Supervisor/Leader.
  • Make sure clock in/out of the ERP system (M3) per Work Order and daily.
  • Perform the following inspections and test on products/materials based on the instruction given: ...
Quality Assurance Inspection
+5
Posted
6 days ago
premium banner
MYR7,000 - MYR10,000 Per Month
  • Operate and maintain 33kV high-voltage substations, switchgear, and distribution boards
  • Carry out HV switching and power on/off changeovers according to established safety procedures
  • Perform routine inspections of transformers, switchgear, and protection relays and identify abnormalities ...
Energy Commission (Suruhanjaya Tenaga) Chargeman competency certificate Skilled in using multimeters
+1

Be an early applicant!

Posted
3 days ago
MYR3,500 - MYR6,000 Per Month
  • Perform batch unpack visual inspection per China QA guideline; escalate functional/dimension issues accordingly.
  • Classify materials as Acceptable / Rejected / Suspicious. For suspicious items, capture photos & videos and submit via APPIA for remote IQC judgement from China.
  • Log inspection results in checklist and update China QA team daily. ...
QC IQC
+1

Be an early applicant!

Posted
6 days ago
MYR1,800 - MYR2,000 Per Month
  • To identify the priority of work orders to process per instructions of Production Supervisor/Lead or Quality Control Supervisor/Leader.
  • Make sure clock in/out of the ERP system (M3) per Work Order and daily.
  • Perform the following inspections and test on products/materials based on the instruction given: ...
Quality Assurance Inspection
+5
Posted
6 days ago
MYR1,800 - MYR2,000 Per Month
  • To identify the priority of work orders to process per instructions of Production Supervisor/Lead or Quality Control Supervisor/Leader.
  • Make sure clock in/out of the ERP system (M3) per Work Order and daily.
  • Perform the following inspections and test on products/materials based on the instruction given: ...
Quality Assurance Inspection
+5
Posted
6 days ago
MYR7,000 - MYR10,000 Per Month
  • Operate and maintain 33kV high-voltage substations, switchgear, and distribution boards
  • Carry out HV switching and power on/off changeovers according to established safety procedures
  • Perform routine inspections of transformers, switchgear, and protection relays and identify abnormalities ...
Energy Commission (Suruhanjaya Tenaga) Chargeman competency certificate Skilled in using multimeters
+1

Be an early applicant!

Posted
3 days ago
MYR7,000 - MYR10,000 Per Month
  • Operate and maintain 33kV high-voltage substations, switchgear, and distribution boards
  • Carry out HV switching and power on/off changeovers according to established safety procedures
  • Perform routine inspections of transformers, switchgear, and protection relays and identify abnormalities ...
Energy Commission (Suruhanjaya Tenaga) Chargeman competency certificate Skilled in using multimeters
+1

Be an early applicant!

Posted
3 days ago
MYR7,000 - MYR10,000 Per Month
  • Operate and maintain 33kV high-voltage substations, switchgear, and distribution boards
  • Carry out HV switching and power on/off changeovers according to established safety procedures
  • Perform routine inspections of transformers, switchgear, and protection relays and identify abnormalities ...
Energy Commission (Suruhanjaya Tenaga) Chargeman competency certificate Skilled in using multimeters
+1

Be an early applicant!

Posted
3 days ago
MYR1,800 - MYR2,500 Per Month
  • Inspect incoming materials, in-process products, and finished products according to required standards
  • Use standard inspection and measuring tools
  • Complete inspection records, non-conformance reports, in-process patrol checklists, and outgoing inspection reports ...
Quality Control Inspection
+1
Posted
3 days ago
MYR4,500 - MYR7,000 Per Month
  • Develop, monitor, and improve manufacturing processes within clean room environments.
  • Ensure compliance with clean room protocols, safety standards, and quality requirements.
  • Analyze production/process issues and implement corrective and preventive actions ...
Mechanical Engineering Process Engineering
+3
Posted
6 days ago
MYR4,500 - MYR7,000 Per Month
  • Develop, monitor, and improve manufacturing processes within clean room environments.
  • Ensure compliance with clean room protocols, safety standards, and quality requirements.
  • Analyze production/process issues and implement corrective and preventive actions ...
Mechanical Engineering Process Engineering
+3
Posted
6 days ago
MYR4,500 - MYR7,000 Per Month
  • Develop, monitor, and improve manufacturing processes within clean room environments.
  • Ensure compliance with clean room protocols, safety standards, and quality requirements.
  • Analyze production/process issues and implement corrective and preventive actions ...
Mechanical Engineering Process Engineering
+3
Posted
6 days ago
MYR4,500 - MYR7,000 Per Month
  • Develop, monitor, and improve manufacturing processes within clean room environments.
  • Ensure compliance with clean room protocols, safety standards, and quality requirements.
  • Analyze production/process issues and implement corrective and preventive actions ...
Mechanical Engineering Process Engineering
+3
Posted
6 days ago
MYR2,300 - MYR3,300 Per Month
  • Perform daily, monthly, 3/6 monthly preventative maintenance (PM) on ATE testers, handlers, and contactors.
  • Clean and replace consumable parts like contactor pins, sockets, and indexers.
  • Perform routine calibration of the test system’s instruments (voltage sources, digital pins, parametric measurement units). ...
Posted
a month ago
MYR2,300 - MYR3,300 Per Month
  • Perform daily, monthly, 3/6 monthly preventative maintenance (PM) on ATE testers, handlers, and contactors.
  • Clean and replace consumable parts like contactor pins, sockets, and indexers.
  • Perform routine calibration of the test system’s instruments (voltage sources, digital pins, parametric measurement units). ...
Posted
a month ago
MYR3,000 - MYR5,500 Per Month
  • Install, commission, maintain, and troubleshoot semiconductor equipment.
  • Perform preventive and corrective maintenance at customer sites.
  • Diagnose machine issues and provide effective technical solutions. ...
Posted
a month ago
MYR3,000 - MYR5,500 Per Month
  • Install, commission, maintain, and troubleshoot semiconductor equipment.
  • Perform preventive and corrective maintenance at customer sites.
  • Diagnose machine issues and provide effective technical solutions. ...
Posted
a month ago
MYR3,000 - MYR5,500 Per Month
  • Install, commission, maintain, and troubleshoot semiconductor equipment.
  • Perform preventive and corrective maintenance at customer sites.
  • Diagnose machine issues and provide effective technical solutions. ...
Posted
a month ago
MYR3,000 - MYR5,500 Per Month
  • Install, commission, maintain, and troubleshoot semiconductor equipment.
  • Perform preventive and corrective maintenance at customer sites.
  • Diagnose machine issues and provide effective technical solutions. ...
Posted
a month ago
MYR2,800 - MYR3,500 Per Month
  • Operate CNC lathes, machining centres, band saws, and other machining equipment
  • Follow operating procedures, safety rules, and equipment manuals
  • Use hand tools and measuring instruments to ensure parts meet required specifications ...
CNC Machining Lathe Operation
+1

Be an early applicant!

Posted
3 days ago
MYR1,800 - MYR2,500 Per Month
  • Inspect incoming materials, in-process products, and finished products according to required standards
  • Use standard inspection and measuring tools
  • Complete inspection records, non-conformance reports, in-process patrol checklists, and outgoing inspection reports ...
Quality Control Inspection
+1
Posted
3 days ago
MYR3,500 - MYR6,000 Per Month
  • Perform batch unpack visual inspection per China QA guideline; escalate functional/dimension issues accordingly.
  • Classify materials as Acceptable / Rejected / Suspicious. For suspicious items, capture photos & videos and submit via APPIA for remote IQC judgement from China.
  • Log inspection results in checklist and update China QA team daily. ...
QC IQC
+1

Be an early applicant!

Posted
6 days ago
MYR2,000 - MYR3,000 Per Month
  • Perform quality inspections on raw materials, components, work-in-progress, and finished products.
  • Inspect products according to company specifications, drawings, samples, and quality standards.
  • Identify and report product defects, abnormalities, damage, or deviations. ...
Quality Control Attention to Detail
+1
Posted
17 days ago

Hi-P International

  • Perform detailed failure analysis and root cause investigation on defective products, assemblies, or components.
  • Utilize debugging tools, test equipment, and software to identify and isolate issues in production or testing stages.
  • Analyze test data, yield reports, and failure trends to recommend corrective and preventive actions. ...
Posted
17 days ago

Masons Sdn Bhd

  • Ability to perform basic mechanical and electrical troubleshooting, maintenance, and repair tasks on equipment and systems.
  • Comfort with using hand tools, measuring instruments, and diagnostic devices in a safe and controlled manner.
  • Strong attention to detail, with the ability to follow technical instructions, standard operating procedures, and safety guidelines. ...
Posted
9 days ago

Sophic Automation Sdn Bhd

  • Installation of STHI PPV Test Equipment’s.
  • Equipment conversion for new Models.
  • PM of STHI equipment’s. ...
Posted
17 days ago