Responsible for preventive and corrective maintenance and calibration
Minimum SPM qualification, graduate from Technical college in Electrical / Electronics are encouraged to apply.
Familiar with trouble shooting and repair works and calibration of Mechanical or electronic parts.
Location : PLO 550, Jalan Keluli 3, 81700 Pasir Gudang, Johor.
Requirements:
• Candidate must possess at least a Diploma / Certificate in Electronic / Electrical or related field.
• Minimum 2(two) years work experience in manufacturing field (technician/technical operator).
• Experience in SMT field is an advantage.
• Able to work under pressure with minimum supervision.
Responsibilities:
• Maintain of machine or equipment.
• Monitor line programming and processing engineering.
• Set up machine.
Benefits :
• Allowance provided.
• Permanent position.
• Salary increment after confirmed.
• Yearly increment.
• Yearly bonus.
• 5 working days (Monday-Friday).
• Parking inside the premise.
• Air-conditioning work environment.
• Panel clinics.
• Medical and dental claims.
• Medical and personal accident insurances.
Job description
-Follow plant policies and repair procedures
-Calibrate, troubleshoot, repair and replace process instruments as a part of the plant’s maintenance program
-Maintain process instruments including valves, vibration monitors and other instruments
-Perform required environmental compliance testing and documentation
-Reduce cost of repairing equipment while maintaining or increasing the quality of repairs
-Work closely with plant operations to evaluate both routine and emergency instrument work
-Wear proper safety equipment in appropriate areas
-Be able to move in and around process equipment and confined spaces
-Adhere to safety rules and procedures. Encourage peer and team member to adopt the established safety code, practices and regulatory requirement
Job Requirements:
-Candidate must possess Instrument & Electronics Engineering, Industrial Engineering or relevant certificates
-Three years above working experience with related industry
-Hand-on repair & troubleshooting instrument/ Electronics equipment
-Experience in PLC and pneumatic system
-Maintaining instrument equipment and devices with experience and plant installation
-Provide effective and reliable support service for plant equipment & facilities.
-Applicant must be willing to work in Tanjung Langsat, Pasir Gudang.
Installation: Install, assemble, and wire electrical systems, components, and equipment according to blueprints, electrical codes, and technical specifications.
Maintenance: Perform routine maintenance tasks on electrical systems to ensure optimal performance and prevent breakdowns. This includes inspecting electrical components, identifying faults or abnormalities, and replacing or repairing defective parts.
Troubleshooting: Diagnose electrical problems by using testing equipment and methods to identify the root cause of malfunctions. Analyze circuitry, wiring diagrams, and schematics to determine appropriate solutions.
...
Perform electrical, installation, diagnose, testing and troubleshooting electrical related system ( include Low voltage distribution system, standby generator, induction motor, starters, VSD, hydraulic, pneumatic and al side equipment. )
Perform installation testing, commissioning, verification and calibration to process instrument equipment and system such as temperature, pressure, level, flow and liquid analysis inclusive of process indicator, controller, recorder, PLC, Scada and etc.
...
Job Responsibilities:
1. Perform shift routine and emergency production activities according to production planning and instruction as with minimum Superior’s instruction to meet production targets and Quality Standard. Ensure the highest safety standard, rules and procedures are adhered to. Also equally emphasis on SHE principle for optimum efficiency during plant operation.
2. Daily responsibilities :
a) Check and confirm local inventory of production materials and chemicals.
b) Carry out a Chemical Preparation for use.
c) Perform a routine sampling as per sampling schedule.
d) Taking a local transmitter data in datasheet. Confirm the data within the operational range and inform to Boardman/Superintendent on any abnormalities.
e) Perform a Butadiene Rubber bale visual inspection. Remove any contamination at bale surface. Inform to QC Shift technician and Superintendent for abnormality finding (i.e. Metal)
f) Patrol, inspect and confirm operating status of rotating equipment and auxiliary system, valves positions and instrumentations by using prepared checklist.
g) Confirm and carry out self-maintenance work such as strainer replacement or small leakages, etc. under superior supervision.
3. Carry out monthly routine inspection and update checklist and operating manual with assistance from Superior.
4. Perform an isolation, drain out, purging and pressure test work for maintenance activity during commissioning, start-up and shutdown of plant as required.
5. Support, promote and participate in all Company related programs and action plans in relation to ISO 9001, ISO 14001 and other programs which can lead to continual improvement, legal compliances and improvement in staff competency/ awareness.
6. Adhere to safety rules and procedures. Encourage peer and team member to adopt the established safety code, practices and regulatory requirement.
7. Other job tasks assigned by Superiors within the job scopes/job specifications and related job tasks to comply with legal and other requirements which Company subscribes
Requirements:
- Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Post Graduate Diploma, Professional Degree in Engineering (Chemical or process engineering would be added advantage)
- Fresh graduates are also welcome to apply
- Have experience in Plant Operation especially in Petrochemical process would be added advantage
- Able to communicate in English & Bahasa Malaysia
- Must be willing to work in shift
- Applicant must be willing to work in Tanjung Langsat, Pasir Gudang.
- On job training and Off job training will be provided
Responsible for repairing and maintaining the Mechanical and Electrical conditions of all facilities, machines, operational equipment and safety equipment by keeping a routine servicing schedule.
Responsible for maintaining the conditions and safekeeping of tools and equipment required for maintenance / servicing.
To troubleshoot, repair and maintain machines, operational and safety equipment.
To maintain records of maintenance activities and report to management if any abnormal issue detected.
To ensure all required records are kept and maintained at all times.
Work closely with Process Engineer, Production supervisors, Production Assistants, Technicians and QA team to ensure smooth running of machines and equipment during day to day operation.
Ensure cleanliness and tidiness at workplace is kept and maintained at all times.
Quality control technicians are responsible for testing materials and finished products to ensure they conform to all applicable laws and company standards. Quality control technicians test products across the three stages of production (before, in-process, and final) to ensure quality levels are met
Monitor daily performance monitoring IETS operation on site meet DOE standard requirement (IETS equipment, pumps, tanks, flowmeter, panel box, ph meter, ph probe).
Monitor daily performance monitoring record IETS operation which is re-check daily logsheet record (complete fill up by operator), conduct daily chemical/parameter analysis (Ni, Cr(IV), Fe, COD, Ph) in mini lab, conduct jar yest in mini lab and monitor daily chemical usage for IETS process.
...
Monitor daily performance monitoring IETS operation on site meet DOE standard requirement (IETS equipment, pumps, tanks, flowmeter, panel box, ph meter, ph probe).
Monitor daily performance monitoring record IETS operation which is re-check daily logsheet record (complete fill up by operator), conduct daily chemical/parameter analysis (Ni, Cr(IV), Fe, COD, Ph) in mini lab, conduct jar yest in mini lab and monitor daily chemical usage for IETS process.
...
-Responsible for developing/modify new and existing PCBA process to improve yield and output
-Trouble shoot all SMT machine and reflow related problem to sustain or improve yield, quality and productivity
-Provide support for carrying out process capabilities studies (CPK) on all existing or new
process/machine and formulated plan to improve capabilities
-Responsible for maintenance of the SMT and reflow software and hardware
-Documents and maintain all software archive in server
-Perform other duties as assigned by Manager
To machine as per sample provided on lathe & milling machines. Parts to be machined are from process control valves which are valve seat, seat ring & insert body gaskets & gland packing. Different material will be used for machining. eg: Teflon & stainless steel
Perform Mechanical maintenance fabrication, installation, assembly, diagnose, testing, repairs, services and troubleshooting including hydraulic/pneumatic system and static. dynamic rotation equipment such as pump, gearbox conveyor, agitator, compressor, hydraulic press and etc.
Identify risks and hazards during operation and responsible to all safety procedure ad good housekeeping standard
...
Responsible to ensure satisfaction of all equipment for smooth production to reduce downtime of the machines
Attend breakdowns, identify fault and problem solve with minimaldow ntime to production UT) and proposed with solutions.
Carry out diagnosis of faults, the maintenance and repairs to all types of plant and equipment in a safe, timely and professional manner and return equipment to operational service
...
1. Carry out instruments & electrical repairs when required to ensure plant availability is maximized.
2. Carry out planned instruments & electrical routine maintenance tasks to ensure plant machinery is running effectively and safely. Ensure routines are completed thoroughly and efficiently.
...