operate and maintain water treatment plant (RODI system), wastewater treatment plant, and scrubber system

perform equipment maintenance and repair

conduct instrument calibration ...

About Us:

For over two decades, the Signature Group has established itself as the market leader in the local kitchen industry under the brand Signature Kitchen, bringing to the world the value of a brand synonymous with quality craftsmanship. As we continued to grow, our holding company, Signature International Berhad was incorporated and public listed on Bursa Malaysia in 2008.

To date, Signature holds the record of the largest kitchen retail network in Malaysia, with a substantial presence across 15 countries in both retail and project segments. We have successfully completed projects for built-in kitchens, wardrobes and ID fit-out for local projects, project portfolio has led to international opportunities in which we can offer competitive, best-in-class, high-quality products to international project developers. ...

To carry out routine maintenance and repair works for equipment in Seremban.

3 years’ working experience in elevator industry.

Experienced to troubleshooting lift model Monarch ...

• Support the QAQC team in maintaining and improving the quality of product. • To implement QAQC procedure based on the ISO 9001 and customer requirements. • Operate the CMM, carry out dimensional inspections of components based on programmed routines, and ensure components comply with set quality standards and tolerances. • Detect and address challenges related to CMM programming, equipment operation, and measurement precision and report to QC engineer. • Keep a systematic record of CMM programs, measurement routines, inspection reports, and calibration logs. Make sure documentation remains current and easily retrievable. • To inspect the incoming material, check and verify the Quality product received is following the standard. • To inspect finished goods of the product is following the Quality standard. • To report any NG material, in process and finished good product to QC engineer. • To stop production or if found non-confirming part and report to the QA Engineer and inform to the Production Leader. • To ensure all the measuring equipment are in good condition. • To check the rejected parts, return from customers. • To assist QC engineer for any customer claims issue • To assist immediate superior on part inspection simplification and improvement on inspection methods and check points. • To assist immediate superior, liaise with other department quality on quality solving matter. • To calibrate all the measuring instruments needing in-house calibration and maintain record of the calibration. • To ensure all the measuring equipment are in good condition.

Description

• Provide building maintenance support and service in shopping mall and hands-on attendance to repairs/complaints on electrical services, air-conditioning and etc.

• Assist in building, facilities, property services within the shopping mall (e.g. improvement and repair works, M&E installations and etc) ...

• Provide building maintenance support and service in shopping mall and hands-on attendance to repairs/complaints on electrical services, air-conditioning and etc. • Assist in building, facilities, property services within the shopping mall (e.g. improvement and repair works, M&E installations and etc) • Carry out maintenance, trouble-shooting, minor repairs and other necessary installation works • Assist in supervision of maintenance and servicing works carried out by contractors • Conduct routine building inspections and checks on maintenance works within the shopping mall • Assist in supervision of systematic servicing of air-conditioning equipment and system within the shopping mall • Provide operational support for events (e.g sound system, speaker and etc) • Attend to all complaints, feedback and service request from tenant • To perform other relevant duties as assigned by the superior

Description

WE'RE HIRING!

IMMEDIATE VACANCY! ...

WE'RE HIRING! IMMEDIATE VACANCY! COMPUTER TECHNICIAN - GAJI BERMULA DARI RM2,000 CIRI-CIRI - Berumur 20 hingga 30 tahun. - Boleh bekerja serta merta. - Boleh berkomunikasi dalam Bahasa Malaysia dan Bahasa Inggeris. - Boleh menyelesaikan masalah dan membaiki komputer/laptop. - Amanah dan tiada rekod jenayah. - Punctual, good attitude and appearence. - Mempunyai kenderaan sendiri. - Berpengalaman dan berpengetahuan dalam bidang repair laptop/computer. FAEDAH-FAEDAH YANG AKAN DIPEROLEHI: - Caruman SOCSO & KWSP. - Elaun tambahan berdasarkan KPI yang ditunjukkan. - Elaun kerja lebih masa. - Elaun kehadiran. - Latihan disediakan. LOCATION Google Maps - https://maps.app.goo.gl/mMLA88b2ZZaiUSHs9?g_st=ic Waze - https://waze.com/ul/hw22rr0vzg Pelbagai kelebihan yang akan diterima sebagai staff TY Computers. Sekiranya berminat, hantarkan CV atau RESUME anda ke:- WhatsApp: +60 11 1111 1960 Emel: tycomputersempire@gmail.com

Description

In-charge of glue production and maintenance of plant equipment.

1. Directly involve in glue production such as analyse in process sample and record all operating parameters. ...

In-charge of glue production and maintenance of plant equipment. 1. Directly involve in glue production such as analyse in process sample and record all operating parameters. 2. Compute amount of raw materials required for a production batch. 3. Transfer finished product to starage tank. 4. Practice good housekeeping in working area. 5. Ensure all machineries and equipment are restored in good condition. 6. Maintain general cleanliness of plant equipment. 7. Report unsafe act, potential hazard or equipment malfunction. 8. Perform any other duties as the company deems fit.

Perform all Chemical related task such as top up/ change/ withdraw/ troubleshooting on the chemical station issue including schedule PM task perform .

Willing to work in Normal hour & Shift if require . As current need, employee to work in shift.

Willing to support shift technician to ensure all the PM task complete within their shift. ...

Perform basic care and maintenance, including changing oil, giving tune-us, checking fluid levels and rotating tires.

Repair or replace worn parts such as brake pads and wheel bearings

Disassemble and reassemble parts ...

Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic),Engineering (Mechanical),Engineering (others),or any competent certificate such as PW-PW4/AO-A1

At least 1 Year(s) of working experience in the related field is required for this position.

Fresh graduate are encouraged to apply. ...

Description

Quality engineering technicians work with quality engineers or managers to analyse and solve quality problems and improve productivity. They examine machines for imperfections and inspect products to make sure they meet the standards. They also provide personnel with training in inspection techniques and prepare inspection plans, New product development,warranty claim

Company ...

Perform all Chemical related task such as top up/ change/ withdraw/ troubleshooting on the chemical station issue including schedule PM task perform .

Willing to work in Normal hour & Shift if require . As current need, employee to work in shift.

Willing to support shift technician to ensure all the PM task complete within their shift. ...

· Perform basic care and maintenance, including changing oil, giving tune-ups, checking fluid levels, and rotating tires.

· Repair or replace worn parts, such as brake pads and wheel bearings.·

Disassemble and reassemble parts.· Use testing equipment to ensure that repairs and maintenance are effective.· ...

Job Description:

Troubleshoot equipment malfunctions and implement effective solutions to minimize downtime.

Perform inspections, diagnostics, and repairs on machinery, including mechanical, electrical, and pneumatic components. ...

Description

• Responsible to perform daily production activities in the plant in compliance with current Good Manufacturing Practice (cGMP), regulatory mandates and quality requirements.

• Responsible to prepare and arrange tasks for the Manufacturing Lines including Compression, Capsule Filling and Coating. ...

Looking for candidates available to work:

Monday: Morning, Evening

Tuesday: Morning, Evening ...

1) To ensure that pumps, blower, filter press and other WWTP equipment are functioning well.

2) To monitor equipment for potential failures and may make minor repairs or adjustments as needed.

3) To perform wastewater in-house testing and sample preparation for outside testing ...

1) To ensure that pumps, blower, filter press and other WWTP equipment are functioning well.

2) To monitor equipment for potential failures and may make minor repairs or adjustments as needed.

3) To perform wastewater in-house testing and sample preparation for outside testing ...

Job Descriptions

Conduct Preventive and Reparative Maintenance duties on automated production machinery, equipment and fixtures.

Conduct troubleshooting for automated production machinery, including robotic system, pneumatic system and Electro/Mechanical system. ...

Description

Primarily involved in Fiberglass Lamination, Cut, Sand and Finish plus Paint operations. Also will be involved in the servicing and maintenance of equipment. Plus other Engineering operations required. A great opportunity for you to consider in an Industry that is growing rapidly.

Company ...

Provide comprehensive and timely failure analysis, construction analysis and technical services for internal and external customer using failure analysis analytical tools.

Perform routine Preventive Maintenance (PM)

Work with minimum supervision. ...

Provide comprehensive and timely failure analysis, construction analysis and technical services for internal and external customer using failure analysis analytical tools.

Perform routine Preventive Maintenance (PM)

Work with minimum supervision. ...

Job Descriptions :

Perform general and specific preventive and corrective maintenance on semiconductor manufacturing equipment. Requires the use of diagnostic equipment and procedures to maintain and repair production equipment. Majority of work is conducted in a cleanroom environment requiring the wearing of specific clothing to be worn over regular clothing.

Participate in continuous improvement activities. ...

a) Job scope:

To conduct daily chemical check as per checklist

To ensure chemical closing and utility parameter are in good order ...

a) Job scope:

To conduct daily chemical check as per checklist

To ensure chemical closing and utility parameter are in good order ...