Work Any Feild Of Mechanical Engineering Jobs in Pulau Pinang - October 2026 - Urgent Hiring
Showing 38 jobs results for
"work any feild of mechanical engineering"
in Pulau Pinang
Site Safety Engineer (SHO/SSS)
MYR6,000 - MYR9,000 Per Month
George Town, Pulau Pinang
- Conducting regular site inspections and risk assessments to identify and address potential safety hazards.
- Developing, implementing and maintaining comprehensive safety management systems and procedures.
- Providing safety training and conducting toolbox talks to educate site personnel on safety best practices. ...
Be an early applicant!
Posted
2 hours ago
Undisclosed
- Report to QA Engineer/Senior QA Engineer.
- To lead the team consist of QA technicians and QA operators to carry out the daily inspection jobs.
- Daily quality inspection output efficiency monitoring and improvement. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- To perform incoming, in-process, and final inspection based on requirements.2. To ensure inspection activities comply with specifications and drawings.3. To detect and properly segregate non-conforming parts.4. To maintain inspection records and reports accurately.5. To support internal calibration and verification activities.6. To monitor and maintain inspection tools and equipment condition.7. To communicate quality issues with production team for immediate action.8. To verify corrective actions on non-conforming issues.9. To perform basic data collection for quality analysis.10. To support QA Engineer in investigation and problem-solving activities.11. To assist in internal audits and documentation checks.12. To ensure compliance with ISO procedures and quality standards.13. To provide guidance to junior technicians during inspection.14. To support improvement initiatives on inspection efficiency.15. To prepare daily or weekly inspection reports when required.
Be an early applicant!
Posted
a month ago
MYR4,000 - MYR5,000 Per Month
- To support process improvement towards efficiency.
- To be responsible and ensure the program is created correctly within the time specified.
- To perform quality assurance tests to ensure products meet design specifications. ...
Be an early applicant!
Posted
a month ago
MYR2,500 - MYR4,000 Per Month
- Plan, schedule, and coordinate daily production activities
- Translate customer orders into actionable production plans and job schedules
- Coordinate closely with Sales, Store and Operations teams to ensure timely execution ...
Posted
a month ago
Senior Production Planner
MYR6,000 - MYR8,000 Per Month
- To develop, maintain and execute the Master Production Schedule (MPS) to meet customer delivery requirements while optimizing production capacity and resource utilization.
- To perform production planning and scheduling for all manufacturing operations using the MES system.
- To review customer demand, sales forecasts and order priorities to establish an achievable production schedule. ...
Posted
a month ago
MYR3,500 - MYR5,000 Per Month
- The Rollomatic CNC Machinist sets up, programs, and operates multi-axis Rollomatic CNC grinding machines (such as the GrindSmart or ShapeSmart series) to manufacture high-precision cutting tools, micro-tools, and medical components. This role requires grinding complex geometries on carbide and HSS while maintaining sub-micron tolerances and flawless surface finishes.
- Machine Setup & Operation: Set up and operate Rollomatic CNC grinding machines, including wheel pack changes, collet adjustments, and robotic loader synchronization.
- Programming & Editing: Load, edit, and optimize CNC programs using Rollomatic software (VirtualGrind Pro). Adjust wheel paths, feeds, speeds, and grinding sequences to meet exact specs. ...
Posted
a month ago
Undisclosed
- To print daily SL WIP Summary Report
- To verify daily Scrap Listing Report vs actual record and monitor till RMA are receive from Vendor, if applicable.
- To assist Planner issue materials requisition and release daily job order to production. ...
Be an early applicant!
Posted
7 days ago
Undisclosed
- To print daily SL WIP Summary Report
- To verify daily Scrap Listing Report vs actual record and monitor till RMA are receive from Vendor, if applicable.
- To assist Planner issue materials requisition and release daily job order to production. ...
Be an early applicant!
Posted
7 days ago
MYR3,500 - MYR5,000 Per Month
- Operate and monitor CNC machines to produce high-precision components according to specifications and blueprints.
- Perform routine maintenance and cleaning of CNC machinery to ensure optimal performance and longevity.
- Inspect finished parts using precision measuring instruments to verify quality and adherence to tolerances. ...
Posted
a month ago
Undisclosed
- Complete mechanical assembly/electrical assembly, installation and testing of equipment to time deadlines with minimal supervision.
- Assemble and integrate a variety of mechanical and electrical assemblies.
- Obtain and verify kitted (pre-picked) details parts and assemblies are issued correctly by comparing part numbers and quantities to drawing(s). ...
Be an early applicant!
Posted
a month ago
MYR4,000 - MYR5,500 Per Month
+Additional Compensation
- Direct and supervise all daily feedmill processing activities—including receiving raw materials, grinding, batching, mixing, pelleting, and bagging/bulk loadout—to achieve scheduled output targets while minimizing downtime and operational bottlenecks.
- Monitor critical control points (such as HACCP, GMP, and ISO standards) throughout the manufacturing process, ensuring strict adherence to nutritional specifications, biosecurity protocols, and regulatory standards to prevent cross-contamination and guarantee animal feed safety.
- Collaborate with the engineering and maintenance teams to execute preventive maintenance schedules, troubleshoot mechanical or automation failures rapidly, and minimize unplanned equipment downtime in a high-demand processing environment. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- To perform in-process inspection independently to ensure compliance with specifications.2. To verify assembly work against drawings and work instructions.3. To record and report non-conformance (NCR).4. To support troubleshooting of quality issues with production team.5. To ensure inspection activities are completed within timeline.6. To maintain proper inspection records and reports.7. To support QA Engineer in quality data collection.8. To ensure compliance with ISO, SOP, and safety requirements.9. Other duties assigned by superior.
Be an early applicant!
Posted
a month ago
Undisclosed
- Must understand the process flow for sheet metal fabrication / CNC machining processes.
- To review Drawing and BOM in ERP system.
- To release Work Order & schedule to production and monitor production activities to meet delivery timelines. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Maintains and record inventory with identify, labelling, and placing materials/goods in stock.2. Locates materials/goods by pulling and verifying materials and supplies listed on production orders.3. Maintains in-process inventory at work centers/section by delivering and opening materials and supplies.4. Documents materials and supplies disposition by recording units delivered and location of units.5. Prepares finished goods for shipment by identifying, pulling, packing, crating, loading, and securing product.6. Maintains material-handling equipment.7. Keeps the inventory areas and workplace clean.8. Contributes to team effort by accomplishing related results as needed.9. Efficiently schedule and maintain handling of materials/goods10. Update daily shipment goods in computer files.11. Other duties and assignments as instructed by superiors from time to time.12. To comply to all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to general safety practices, standard operating procedure, work instructions, policies and guidelines provided by the company.
Be an early applicant!
Posted
a month ago
Undisclosed
- To monitor daily quality inspection on parts received, ensure specification & process requirements are met.
- Area of coverage may include vendor incoming raw material inspection, set-up buy-off, in-process inspection, out-going inspection.
- Monitor tools and equipment condition, QA room temperature and humidity tracking. ...
Be an early applicant!
Posted
a month ago
MYR6,500 - MYR8,500 Per Month
- Drive strategic sourcing initiatives to achieve cost savings, improve quality, and ensure supply continuity.
- Lead supplier identification, qualification, audits, evaluations, and selection processes to assess supplier capabilities, quality systems, capacity, risk exposure, and business continuity readiness.
- Support contract negotiations and commercial discussions with suppliers to achieve competitive and sustainable business terms. ...
Posted
2 months ago
MYR6,500 - MYR8,500 Per Month
- Drive strategic sourcing initiatives to achieve cost savings, improve quality, and ensure supply continuity.
- Lead supplier identification, qualification, audits, evaluations, and selection processes to assess supplier capabilities, quality systems, capacity, risk exposure, and business continuity readiness.
- Support contract negotiations and commercial discussions with suppliers to achieve competitive and sustainable business terms. ...
Posted
2 months ago
Undisclosed
- Plan production activities based on established production schedules and make daily assignment.
- Ensure Occupational, Health & Safety compliance at workplace.
- Request raw materials and consumables. ...
Be an early applicant!
Posted
2 months ago
MYR2,300 - MYR3,500 Per Month
- Establish and maintain product requirements, inspection criteria, and testing procedures for Colour Coil products.
- Monitor and control manpower, inspection, testing, and production processes to ensure product quality and consistency.
- Manage non-conformance issues, including investigation, corrective action, and proper disposition. ...
Be an early applicant!
Posted
21 days ago
MYR5,000 - MYR6,000 Per Month
- In-Process Patrol Inspection: Conduct patrol inspections of production materials, semi-finished products, operating procedures, and process parameters according to SOP and quality standards.
- Process Risk Identification & Prevention: Identify potential quality risks related to process changes, personnel, equipment, materials, and production environment, and implement preventive measures.
- Quality Abnormality Handling: Identify defective products and process deviations, issue abnormality notifications, and follow up on containment, root cause analysis, and corrective actions. ...
Posted
4 days ago
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment (Cu Clip Inline Machine and all Offline Machine).
- Verify machine settings and ensure calibration is correct before starting operations. ...
Be an early applicant!
Posted
2 months ago
MYR3,800 - MYR5,000 Per Month
- Ensure process readiness through effective FMEA, Control Plan, OCAP, Work Instruction, Process Spec & Check List including EHS requirements.
- Monitor and drive improvement on key process health indicators (Yield/Defect, Quality etc).
- Drive Statistical Process Control and improvement to meet/exceed process Cpk target. ...
Posted
3 months ago
MYR6,000 - MYR9,000 Per Month
George Town, Pulau Pinang
- Conducting regular site inspections and risk assessments to identify and address potential safety hazards.
- Developing, implementing and maintaining comprehensive safety management systems and procedures.
- Providing safety training and conducting toolbox talks to educate site personnel on safety best practices. ...
Be an early applicant!
Posted
2 hours ago
MYR6,000 - MYR9,000 Per Month
George Town, Pulau Pinang
- Conducting regular site inspections and risk assessments to identify and address potential safety hazards.
- Developing, implementing and maintaining comprehensive safety management systems and procedures.
- Providing safety training and conducting toolbox talks to educate site personnel on safety best practices. ...
Be an early applicant!
Posted
2 hours ago
MYR6,000 - MYR9,000 Per Month
George Town, Pulau Pinang
- Conducting regular site inspections and risk assessments to identify and address potential safety hazards.
- Developing, implementing and maintaining comprehensive safety management systems and procedures.
- Providing safety training and conducting toolbox talks to educate site personnel on safety best practices. ...
Be an early applicant!
Posted
2 hours ago
MYR6,000 - MYR9,000 Per Month
George Town, Pulau Pinang
- Conducting regular site inspections and risk assessments to identify and address potential safety hazards.
- Developing, implementing and maintaining comprehensive safety management systems and procedures.
- Providing safety training and conducting toolbox talks to educate site personnel on safety best practices. ...
Be an early applicant!
Posted
2 hours ago
MYR6,000 - MYR9,000 Per Month
George Town, Pulau Pinang
- Conducting regular site inspections and risk assessments to identify and address potential safety hazards.
- Developing, implementing and maintaining comprehensive safety management systems and procedures.
- Providing safety training and conducting toolbox talks to educate site personnel on safety best practices. ...
Be an early applicant!
Posted
2 hours ago
MYR6,000 - MYR9,000 Per Month
George Town, Pulau Pinang
- Conducting regular site inspections and risk assessments to identify and address potential safety hazards.
- Developing, implementing and maintaining comprehensive safety management systems and procedures.
- Providing safety training and conducting toolbox talks to educate site personnel on safety best practices. ...
Be an early applicant!
Posted
2 hours ago
MYR6,000 - MYR9,000 Per Month
George Town, Pulau Pinang
- Conducting regular site inspections and risk assessments to identify and address potential safety hazards.
- Developing, implementing and maintaining comprehensive safety management systems and procedures.
- Providing safety training and conducting toolbox talks to educate site personnel on safety best practices. ...
Be an early applicant!
Posted
2 hours ago