Engineer Jobs in Simpang Ampat - September 2026 - Urgent Hiring
Showing 165 jobs results for
"engineer"
in Simpang Ampat
Undisclosed
- To establish build sequence and production workflow.2. To create Work Instruction of the required process in the production floor.3. To assess the required jig, fixture and tools.4. To create PFMEA, control plan and risk assesment.5. Provide inputs and support IE to optimize production layout.6. To provide solutions and support for quality issue affecting production deliveries.7. To liaise with engineering, material, PM and MIS on BOM/ drawing/design changes/issues.8. To enchance processing techniques and methods applied in production floor.9. Drive and develop new process improvements to reduce cost and increase productivity.10. To provide training to production staff on the process, work instruction and improvement implementation to the production floor.11. Analysis of production data for productivity improvement.12. To lead/guide/train Process Engineer level 1,2, 3 on process engineering and line improvement.13. To comply with all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to general safety practices, standard operating procedure, work instructions, policies and guidelines provided by the company.14. Other duties and assignments as instructed by superiors from time to time.
Be an early applicant!
Posted
10 days ago
Undisclosed
- Monitor day-to-day inspection operations on vendors supplied products.
- To liaise with the incoming inspection team and buyer on supplier quality issues.
- Supplier quality performance monitoring, evaluation & drive for improvement. ...
Be an early applicant!
Posted
16 days ago
Undisclosed
- Complete mechanical assembly/electrical assembly with guidance by the senior technician, team leader, supervisor and/or engineering, installation and testing of equipment to time deadlines.2. Assemble and integrate a variety of mechanical and electrical assemblies. 3. Obtain and verify kitted (pre-picked) details parts and assemblies were issued correctly by comparing part numbers and quantities to drawing(s).4. Follow oral/written instructions provided by the senior technician, team leader, supervisor and/or engineering to complete assembly tasks.5. Ensure that parts issued are free of visible defects.6. Check work after completion of each operation in job and/or completed job to ensure assembly is complete per drawing, that there are no defects and that the work area is clean.7. Travel to customer sites and carry out installation, servicing work and training as scheduled.8. Other duties and assignments as instructed by superiors from time to time.9. Perform On Site Customer support assign by the Superior or the management.10. To comply to all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to general safety practices, standard operating procedure, work instructions, policies and guidelines provided by the company.
Be an early applicant!
Posted
10 days ago
MYR2,200 - MYR2,500 Per Month
Fresh Graduates
- Perform product testing, qualification, and failure analysis to support new product introductions, engineering evaluations, and customer requirements.
- Execute engineering qualification plans including RMA investigations, assembly qualifications, production sampling, and product validation activities.
- Support system-level debugging using diagnostic software, bus analyzers, and engineering test tools. ...
Be an early applicant!
Posted
16 days ago
MYR1,850 - MYR3,500 Per Month
+Additional Compensation
Fresh Graduates
14110 Simpang Ampat, Simpang Ampat
- Assemble and wire electrical control panels and systems according to schematics and blueprints.
- Install and connect electrical components, wiring, and devices within machinery and equipment.
- Perform continuity and resistance testing on wiring to ensure proper functionality and safety. ...
Posted
21 days ago
Undisclosed
- Performing daily, weekly, monthly, and scheduled preventive maintenance activities.
- Performing corrective maintenance and repair work during equipment breakdowns.
- Conducting equipment inspection and identifying abnormal conditions. ...
Be an early applicant!
Posted
16 days ago
Undisclosed
- To perform incoming, in-process, and final inspection based on requirements.2. To ensure inspection activities comply with specifications and drawings.3. To detect and properly segregate non-conforming parts.4. To maintain inspection records and reports accurately.5. To support internal calibration and verification activities.6. To monitor and maintain inspection tools and equipment condition.7. To communicate quality issues with production team for immediate action.8. To verify corrective actions on non-conforming issues.9. To perform basic data collection for quality analysis.10. To support QA Engineer in investigation and problem-solving activities.11. To assist in internal audits and documentation checks.12. To ensure compliance with ISO procedures and quality standards.13. To provide guidance to junior technicians during inspection.14. To support improvement initiatives on inspection efficiency.15. To prepare daily or weekly inspection reports when required.
Be an early applicant!
Posted
16 days ago
Electrical Wiring Technician
MYR1,850 - MYR3,500 Per Month
+Additional Compensation
Fresh Graduates
14110 Simpang Ampat, Simpang Ampat
- Assemble and wire electrical control panels and systems according to schematics and blueprints.
- Install and connect electrical components, wiring, and devices within machinery and equipment.
- Perform continuity and resistance testing on wiring to ensure proper functionality and safety. ...
Posted
20 days ago
Electrical Support Technician
MYR1,850 - MYR3,500 Per Month
+Additional Compensation
Fresh Graduates
14110 Simpang Ampat, Simpang Ampat
- Assemble and wire electrical control panels and systems according to schematics and blueprints.
- Install and connect electrical components, wiring, and devices within machinery and equipment.
- Perform continuity and resistance testing on wiring to ensure proper functionality and safety. ...
Posted
20 days ago
Electrical Technician Assistant
MYR1,850 - MYR3,500 Per Month
+Additional Compensation
Fresh Graduates
14110 Simpang Ampat, Simpang Ampat
- Assemble and wire electrical control panels and systems according to schematics and blueprints.
- Install and connect electrical components, wiring, and devices within machinery and equipment.
- Perform continuity and resistance testing on wiring to ensure proper functionality and safety. ...
Posted
20 days ago
Company Confidential
MYR5,000 - MYR6,000 Per Month
- This role involves establishing and maintaining quality systems, managing process quality control, analyzing quality issues, and managing quality data to ensure continuous improvement and effective operations across manufacturing.
- Quality system establishment and maintenance: Participate in the construction and maintenance of the quality system, compile procedure documents, operation instructions and record forms, regularly organize internal audits and management reviews to ensure the continuous and effective operation of the system;
- Process quality control: Participate in quality analysis and improvement, supervise the implementation and effectiveness of analysis and improvement, and carry out quality prevention. Take the lead in handling production anomalies in the manufacturing department, output corrective and preventive measures, and follow up on their closed-loop implementation. ...
Be an early applicant!
Posted
2 days ago
MYR2,500 - MYR3,000 Per Month
Fresh Graduates
- Cut, bend, shape, and assemble PFA plastic tubing according to customer orders and technical drawings.
- Operate simple production tools, machines, and heating equipment safely.
- Measure (like rulers or calipers) and inspect finished tubing for defects. ...
Be an early applicant!
Posted
3 days ago
MYR5,000 - MYR6,000 Per Month
- This role involves establishing and maintaining quality systems, managing process quality control, analyzing quality issues, and managing quality data to ensure continuous improvement and effective operations across manufacturing.
- Quality system establishment and maintenance: Participate in the construction and maintenance of the quality system, compile procedure documents, operation instructions and record forms, regularly organize internal audits and management reviews to ensure the continuous and effective operation of the system;
- Process quality control: Participate in quality analysis and improvement, supervise the implementation and effectiveness of analysis and improvement, and carry out quality prevention. Take the lead in handling production anomalies in the manufacturing department, output corrective and preventive measures, and follow up on their closed-loop implementation. ...
Be an early applicant!
Posted
a day ago
Bending Technician/ Operator
MYR1,700 - MYR3,000 Per Month
- To operate bending machines with minimum supervision.
- To ensure bending process are carried out in accordance with specified requirements.
- To be responsible for safety handling of bending machines. ...
Posted
15 days ago
Marketing & Engineering
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Review customer engineering drawings, specifications and requirements for quotation purposes.
- Understand machining processes such as CNC milling, CNC turning and conventional machining.
- Evaluate drawing requirements including material, dimensions, tolerances, surface finish and special requirements. ...
Posted
3 days ago
MYR2,000 - MYR2,800 Per Month
+Additional Compensation
- Carry out modification works such as wiring/electrical works, rewiring, installation of lights, circuits, and electrical socket supplies for household equipment, and troubleshooting wiring issues.
- Perform air conditioning maintenance and servicing, including troubleshooting and minor repairs.
- Knowledge of smart meter installation is an added advantage. ...
Be an early applicant!
Posted
20 days ago
Undisclosed
- Analyze and suggest improvements for manufacturing workflows and layouts to improve throughput.
- Conduct Root Cause Analysis for quality and productivity issues using 5M+1E and Fishbone diagrams.
- Implement small to medium-scale process improvement projects using Lean and Six Sigma tools. ...
Be an early applicant!
Posted
10 days ago
Undisclosed
- Responsible to ensure sales objectives and targets are met.2. Communicate and liaise with customers in handling customer enquiries, order processing, product details, agreementpreparation, etc.3. Ensure customer information request, complaints and suggestion are handled promptly and professionally.4. Prepared and processed quotation and sales order.5. Closed monitoring order delivery and ensured customer's payment up-to date.6. Work closely with related department to ensure customer requests are performed accordingly.7. Maintain existing customer base and develop new customers.8. Build and maintain good relationship with customers at all levels.9. Other duties and assignments as instructed by superiors from time to time.10. To comply to all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to generalsafety practices, standard operating procedure, work instructions, policies and guidelines provided by the company.
Be an early applicant!
Posted
10 days ago
Undisclosed
- Oversee or assist superior in coordinating the in-house/on-site assembly & installation of company products.
- Communicate and solve problems with counterparts from other departments to ensure timely coordination of engineering, purchasing and production.
- Be an interface point to customer counterparts for assembly and site installation. ...
Be an early applicant!
Posted
10 days ago
Undisclosed
- Optimization on metal work machine production flow and output.
- To review the new drawing metal work fabrication capabilities and provide the process flow, BOM, estimate production lead time for MES BOO & BOM.
- Establish WI for process plan, process WI and machine operation/set-up procedure for Metal Work processes. ...
Be an early applicant!
Posted
10 days ago
Undisclosed
- Complete mechanical assembly/electrical assembly, installation and testing of equipment to time deadlines with minimal supervision.
- Assemble and integrate a variety of mechanical and electrical assemblies.
- Obtain and verify kitted (pre-picked) details parts and assemblies are issued correctly by comparing part numbers and quantities to drawing(s). ...
Be an early applicant!
Posted
10 days ago
Undisclosed
- Leads project of significant organizational profile not limit to own field of expertise.
- Completes engineering projects by organizing and controlling project elements.
- Monitoring and coordinating in between customer and interdepartmental for project execution. ...
Be an early applicant!
Posted
10 days ago
Undisclosed
- Understand project requirements, perform feasibility studies, and able to propose machine vision solutions to customer.
- Perform image evaluation on customer's samples to determine and propose the hardware (optic, camera, lens, lighting) and software requirement for machine vision system.
- Design and develop machine vision system based on project requirements with software programming language or logic based configuration by utilizing image processing library. ...
Be an early applicant!
Posted
10 days ago
Undisclosed
Fresh Graduates
- Liaise with Mechanical Design and Software teams to understand project requirements and integrate electrical design specifications into the machine's development.
- Create and maintain detailed bills of materials (BOM), selecting and sourcing electrical components aligned with project needs, cost-effectiveness, and availability.
- Utilize AutoCAD/Eplan (or other electrical schematic tools) to design electrical schematic diagrams in accordance with customer specifications and project requirements. ...
Be an early applicant!
Posted
10 days ago
Undisclosed
- Developing the annual, monthly, weekly, and daily preventive maintenance schedule.
- Creating maintenance work instructions, checklists, SOPs, and troubleshooting guides.
- Identifying critical equipment and defining maintenance frequency. ...
Be an early applicant!
Posted
16 days ago
Undisclosed
- Serve as focal point of contact for customers on quality-related matters with minimal supervision.2. Ensure products meet customer specifications, drawings, and quality standards.3. Lead customer audits preparation, coordination, and follow-up on audit findings.4. Lead root cause analysis and corrective action implementation; ensure timely closure and effectiveness verification.5. Prepare and maintain quality documentation (Control Plan, Inspection Reports, FAI, PPAP documents where applicable).6. Monitor quality performance metrics and drive improvement actions based on data analysis.7. Identify process improvement opportunities and work with cross-functional teams to implement solutions.8. Provide technical guidance to QA Technicians on inspection methods and quality requirements.9. Participate in new product introduction (NPI), including pretest, first article inspection, and buyoff.10. Support QMS implementation, audit compliance, and continuous improvement initiatives.11. Handle internal non-conformance and support MRB activities.12. Ensure compliance to ISO standards, safety practices, SOP, and company policies.13. Mentor and coach E1 on quality standards and documentation best practices.
Be an early applicant!
Posted
10 days ago