Manufacturing Factory Jobs in Bayan Lepas - October 2026 - Urgent Hiring
Showing 231 jobs results for
"manufacturing factory"
in Bayan Lepas
MYR4,500 - MYR6,000 Per Month
- Oversee the daily production processes for PCBA and SMT lines to ensure efficiency, quality, and timely delivery of products.
- Collaborate with cross-functional teams to troubleshoot and resolve production issues, ensuring minimal downtime and maximum productivity.
- Implement and optimize manufacturing processes to improve yield, reduce costs, and enhance product quality. ...
Posted
12 days ago
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Perform Failure Analysis & Fault Isolation (FAFI) to determine defect modes and root causes.
- Conduct electrical failure analysis to identify component defects and support factory rejection cases.
- Carry out validation and fault isolation using tools such as Parametric Analyzer, Keithley meter, iTDR, SEM/EDX, and IRLC. ...
Be an early applicant!
Posted
a month ago
MYR2,600 - MYR4,000 Per Month
- Lead and supervise manufacturing operators and line leaders to achieve production output, quality, and cycle time targets.
- Ensure compliance with cleanroom protocols, safety regulations, and quality standards.
- Participate in process improvement, cost reduction, yield enhancement, and RPA projects. ...
Posted
9 days ago
MYR3,500 - MYR6,000 Per Month
- Lead a team of manufacturing operators and line leaders to achieve output, quality, and cycle time targets.
- Follow 5S practices, safety regulations, and quality standards at all times.
- Comply with company policies, EHS requirements, and industry regulations. ...
Posted
11 days ago
MYR6,000 - MYR8,000 Per Month
- Provide day-to-day leadership, mentorship, and guidance to a team of 6 BOM analysts.
- Cultivate a high-performance culture based on trust, accountability, and continuous development.
- Provide approvals and remove blockers, as needed. ...
Posted
a month ago
MYR1,700 - MYR1,800 Per Month
- Operate production machinery and perform assembly tasks
- Handle Wafer according to procedure and quality standard.
- Meet daily production targets as assigned ...
Posted
2 months ago
MYR8,000 - MYR15,000 Per Month
- Lead the process design and optimization of water treatment systems, specialty gas supply systems and chemical delivery systems, formulate technical schemes, process flows and equipment selection standards;
- Responsible for semiconductor/ pharmaceutic project process systems (including UPW, Wastewater treatment, special gas and chemical distribution) calculation and drawings based on project criteria and client/national codes;
- Manage the process team in project implementation, review design drawings, technical parameters and construction schemes, and solve key process problems in system commissioning and operation; ...
Be an early applicant!
Posted
5 days ago
Undisclosed
- To perform routine product sustaining functions. F/A and to resolve any engineering issues.
- To perform process engineering, process optimization, new material qualification, cost reduction, quality, yield and output improvement.
- Provide engineering support in trouble-shooting line and product's related problem. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment (Cu Clip Inline Machine and all Offline Machine).
- Verify machine settings and ensure calibration is correct before starting operations. ...
Be an early applicant!
Posted
2 months ago
MYR1,700 - MYR1,800 Per Month
- Operate production machinery and equipment
- Ensure daily production targets are met
- Maintain quality and safety standards ...
Posted
2 months ago
MYR4,000 - MYR6,000 Per Month
- Responsible for the assembly, integration, testing, troubleshooting, and improvement of automation machinery and equipment according to engineering drawings, work instructions, and quality standards.
- Assemble automation machines, modules, and mechanical sub-assemblies according to engineering drawings, BOMs, and work instructions.
- Perform mechanical fitting, alignment, adjustment, and integration of machine components. ...
Posted
a month ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
a month ago
Undisclosed
- Hand on setup the equipment and process during engineering activities such as engineering evaluations.
- Evaluation report compilation and initial data analysis.
- Support Yield & Quality KPI improvement. ...
Posted
a month ago
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Posted
a month ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
a month ago
Undisclosed
- Analyse data and monitor implementation of al Process and Quality Control Strategy.
- Drive for quality continuous improvement project (Minimize Manual Touch Point, E-system (eliminate manual recording)
- Monitor of critical process CPK data of ensuring a stable process to maintain product quality. ...
Posted
a month ago
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Posted
a month ago
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Posted
a month ago
MYR2,600 - MYR4,000 Per Month
- Lead and supervise manufacturing operators and line leaders to achieve production output, quality, and cycle time targets.
- Ensure compliance with cleanroom protocols, safety regulations, and quality standards.
- Participate in process improvement, cost reduction, yield enhancement, and RPA projects. ...
Posted
17 days ago
MYR2,700 - MYR3,200 Per Month
Fresh Graduates
- Prepared & plan for daily production schedules.
- Monitoring production process in SAP ERP system.
- Liaise with Material controller to ensure the required materials are on time to support production. ...
Posted
8 days ago
MYR2,700 - MYR3,200 Per Month
Fresh Graduates
- Prepared & plan for daily production schedules.
- Monitoring production process in SAP ERP system.
- Liaise with Material controller to ensure the required materials are on time to support production. ...
Posted
8 days ago
MYR3,500 - MYR6,000 Per Month
- Lead a team of manufacturing operators and line leaders to achieve output, quality, and cycle time targets.
- Follow 5S practices, safety regulations, and quality standards at all times.
- Comply with company policies, EHS requirements, and industry regulations. ...
Posted
11 days ago
MYR4,500 - MYR5,000 Per Month
Fresh Graduates
- Assist in the daily production activities, ensuring smooth operations and adherence to production schedules and quality standards.
- Support senior engineers in implementing and monitoring lean manufacturing principles and process improvement initiatives to enhance efficiency and reduce waste.
- Participate in root cause analysis for production issues and contribute to the development and implementation of corrective actions. ...
Posted
13 days ago
MYR2,600 - MYR4,000 Per Month
- Lead and supervise manufacturing operators and line leaders to achieve production output, quality, and cycle time targets.
- Ensure compliance with cleanroom protocols, safety regulations, and quality standards.
- Participate in process improvement, cost reduction, yield enhancement, and RPA projects. ...
Posted
17 days ago
MYR2,600 - MYR4,000 Per Month
- Lead and supervise manufacturing operators and line leaders to achieve production output, quality, and cycle time targets.
- Ensure compliance with cleanroom protocols, safety regulations, and quality standards.
- Participate in process improvement, cost reduction, yield enhancement, and RPA projects. ...
Posted
17 days ago
MYR2,500 - MYR3,500 Per Month
- Assemble electrical and electronic components according to technical drawings and schematics.
- Perform wiring, soldering, and testing of electrical components.
- Ensure all assembly work complies with safety and quality standards. ...
Posted
19 days ago
MYR2,500 - MYR3,500 Per Month
- Set up and operate CNC milling and/or turning machines.
- Process automation products using aluminium and plastic materials.
- Read and interpret engineering drawings. ...
Posted
19 days ago
MYR2,000 - MYR2,500 Per Month
- Demonstrates strong attention to detail and precision in selecting specifications and executing measurements in accordance with correct CD definitions. Familiarity with process layer structures (e.g., nitride, spacer) is an added advantage.
- Shows patience and consistency in performing repetitive measurement tasks.
- Possesses strong analytical thinking, including sound decision-making on whether CDs should be corrected or retained. Able to assess if available specifications provide sufficient information to proceed with CD corrections. ...
Posted
2 months ago
MYR2,000 - MYR2,500 Per Month
- Demonstrates strong attention to detail and precision in selecting specifications and executing measurements in accordance with correct CD definitions. Familiarity with process layer structures (e.g., nitride, spacer) is an added advantage.
- Shows patience and consistency in performing repetitive measurement tasks.
- Possesses strong analytical thinking, including sound decision-making on whether CDs should be corrected or retained. Able to assess if available specifications provide sufficient information to proceed with CD corrections. ...
Posted
2 months ago