Minimum 2 Years Experience Jobs in Pulau Pinang - September 2026 - Urgent Hiring
Showing 300 jobs results for
"minimum 2 years experience"
in Pulau Pinang
Machinist (Cnc 3 Axis / Wire Cut)
MYR2,000 - MYR3,000 Per Month
Fresh Graduates
- To prepare and operate manual & semi-auto machines e.g. milling & grinding machines and CNC machines e.g. CNC multi-axis, Wire Cut & EDM machines.
- To set up machines to complete full cycles to fabricate large number of parts.
- To perform manual tapping and buffing of parts if required. ...
Be an early applicant!
Posted
14 days ago
Undisclosed
- Review training plans for the department
- Review assembly technician skills matrix yearly
- Review the skills matrix yearly once the technician completes the training ...
Be an early applicant!
Posted
6 days ago
Undisclosed
- Complete mechanical assembly/electrical assembly with guidance by the senior technician, team leader, supervisor and/or engineering, installation and testing of equipment to time deadlines.2. Assemble and integrate a variety of mechanical and electrical assemblies. 3. Obtain and verify kitted (pre-picked) details parts and assemblies were issued correctly by comparing part numbers and quantities to drawing(s).4. Follow oral/written instructions provided by the senior technician, team leader, supervisor and/or engineering to complete assembly tasks.5. Ensure that parts issued are free of visible defects.6. Check work after completion of each operation in job and/or completed job to ensure assembly is complete per drawing, that there are no defects and that the work area is clean.7. Travel to customer sites and carry out installation, servicing work and training as scheduled.8. Other duties and assignments as instructed by superiors from time to time.9. Perform On Site Customer support assign by the Superior or the management.10. To comply to all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to general safety practices, standard operating procedure, work instructions, policies and guidelines provided by the company.
Be an early applicant!
Posted
6 days ago
Undisclosed
- To establish build sequence and production workflow.2. To create Work Instruction of the required process in the production floor.3. To assess the required jig, fixture and tools.4. To create PFMEA, control plan and risk assesment.5. Provide inputs and support IE to optimize production layout.6. To provide solutions and support for quality issue affecting production deliveries.7. To liaise with engineering, material, PM and MIS on BOM/ drawing/design changes/issues.8. To enchance processing techniques and methods applied in production floor.9. Drive and develop new process improvements to reduce cost and increase productivity.10. To provide training to production staff on the process, work instruction and improvement implementation to the production floor.11. Analysis of production data for productivity improvement.12. To lead/guide/train Process Engineer level 1,2, 3 on process engineering and line improvement.13. To comply with all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to general safety practices, standard operating procedure, work instructions, policies and guidelines provided by the company.14. Other duties and assignments as instructed by superiors from time to time.
Be an early applicant!
Posted
6 days ago
Undisclosed
- Monitor day-to-day inspection operations on vendors supplied products.
- To liaise with the incoming inspection team and buyer on supplier quality issues.
- Supplier quality performance monitoring, evaluation & drive for improvement. ...
Be an early applicant!
Posted
6 days ago
MYR2,000 - MYR5,000 Per Month
- • 协助机械设计及绘制技术图纸• 操作手动／传统铣床• 阅读及理解基本机械图纸• 按照要求进行加工及制作• 确保工作质量、准确度及安全• 负责机器、工具及工作区域的日常维护• 配合团队完成主管安排的工作
Be an early applicant!
Posted
6 days ago
CNC Machinist Group Leader
Undisclosed
- Assign daily tasks to team members based on production schedules
- Monitor machine output and workflow to hit production targets
- Track job progress and report delays to the production manager ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Performing daily, weekly, monthly, and scheduled preventive maintenance activities.
- Performing corrective maintenance and repair work during equipment breakdowns.
- Conducting equipment inspection and identifying abnormal conditions. ...
Be an early applicant!
Posted
12 days ago
MYR2,200 - MYR2,500 Per Month
Fresh Graduates
- Perform product testing, qualification, and failure analysis to support new product introductions, engineering evaluations, and customer requirements.
- Execute engineering qualification plans including RMA investigations, assembly qualifications, production sampling, and product validation activities.
- Support system-level debugging using diagnostic software, bus analyzers, and engineering test tools. ...
Be an early applicant!
Posted
12 days ago
Undisclosed
- Monitor day-to-day inspection operations on vendors supplied products.
- To liaise with the incoming inspection team and buyer on supplier quality issues.
- Supplier quality performance monitoring, evaluation & drive for improvement. ...
Be an early applicant!
Posted
12 days ago
MYR2,100 - MYR4,000 Per Month
Fresh Graduates
- Conducts tests, experiments and/or problem resolution associated with components, parts, products or processes/systems.
- May design and/or build tools.
- Test & Repair: Tests and calibrates and/or repairs and monitors and/or installs and diagnoses equipment, systems, and/or assemblies. ...
Be an early applicant!
Posted
5 days ago
MYR2,500 - MYR3,500 Per Month
- Set up and operate CNC milling and/or turning machines.
- Process automation products using aluminium and plastic materials.
- Read and interpret engineering drawings. ...
Posted
5 days ago
Mechanical & Electrical Technician / Electrical Assembler
MYR2,500 - MYR3,500 Per Month
- Assemble electrical and electronic components according to technical drawings and schematics.
- Perform wiring, soldering, and testing of electrical components.
- Ensure all assembly work complies with safety and quality standards. ...
Posted
5 days ago
Technical Service Engineer (Mandarin Speaker)
MYR2,500 - MYR4,000 Per Month
George Town, Pulau Pinang
- Take charge of assigned products and ensure smooth operations while providing continuous service support.
- Perform installation and commissioning of machines/equipment on-site.
- Carry out preventive maintenance, troubleshooting, and repair of equipment in-house or on-site. ...
Be an early applicant!
Posted
7 days ago
MYR2,200 - MYR2,500 Per Month
+Additional Compensation
Fresh Graduates
- Perform Test sequent for unit under test, Identify and troubleshoot processes, material, or equipment issues to minimize down time and recommend solutions.
- Perform test related tasks for unit under test via Test platform provided by Company,
- Trouble shoot test unit, perform debugging for minor Test failure unit. ...
Be an early applicant!
Posted
18 days ago
MYR2,300 - MYR3,000 Per Month
+Additional Compensation
- Precision Trimming & Fitting: Carefully trim, adjust, and fit dental models using specialized hand tools and micro-motors.
- Surface Sanding & Finishing: Use various grades of sandpaper, burs, and rotary tools to smooth out rough edges and shape pieces to exact specifications.
- High-Shine Polishing: Polish completed dental work using polishing wheels, compounds, and steam cleaners to achieve a flawless, smooth, and high-gloss finish. ...
Be an early applicant!
Posted
18 days ago
MYR1,700 - MYR2,500 Per Month
- Carry out installation, upgrade, maintenance, testing and commissioning works at site as assigned.
- Perform troubleshooting and corrective works for CCTV systems and related equipment.
- Support site activities according to project schedules and requirements. ...
-Willing and able to travel between project sites within the Northern Zone.
-Willing to work after hours
+4
Be an early applicant!
Posted
16 days ago
MYR2,100 - MYR2,300 Per Month
Fresh Graduates
- Perform test equipment installation, setup, conversion, and buyoff activities.
- Support equipment transfer, qualification, and readiness for production use.
- Assist in new product introduction (NPI) and manufacturing ramp activities ...
Be an early applicant!
Posted
a month ago
MYR2,000 - MYR2,800 Per Month
- Assist in machine assembly, installation, testing, and commissioning activities.
- Perform preventive maintenance, servicing, and troubleshooting of machinery and equipment.
- Attend customer sites for installation, maintenance, repair, and technical support. ...
Posted
9 days ago
MYR2,500 - MYR3,500 Per Month
- Coordinate day-to-day technical and field operations across all assigned sites within the Northern Zone.
- Coordinate technicians and Team Leaders for Installation & Upgrade, Preventive Maintenance, and Testing & Commissioning activities.
- Monitor site activities to ensure works are completed according to project requirements and schedules. ...
Be an early applicant!
Posted
16 days ago
Project Management Engineer
MYR2,500 - MYR3,800 Per Month
Fresh Graduates
- Plan, coordinate, and monitor project activities to ensure successful project delivery.
- Manage project schedules, milestones, resources, and budgets.
- Coordinate with customers, suppliers, subcontractors, and internal departments. ...
Posted
10 days ago
Undisclosed
- Set up, operate, and maintain CNC machines to perform precision machining operations.
- Read and interpret engineering drawings, blueprints, and technical documents.
- Inspect and measure finished products to ensure they meet required specifications. ...
Posted
11 days ago
MYR2,300 - MYR3,500 Per Month
- Perform routine preventive maintenance and troubleshoot equipment failures to minimize downtime.
- Support daily manufacturing operations, including equipment setup and responding to equipment alarms.
- Assist engineers during process adjustments, testing, and production trials. ...
Be an early applicant!
Posted
3 days ago
Quality Assurance (QA) Manager
MYR5,000 - MYR7,000 Per Month
- Lead and manage the Quality Assurance (QA) and Quality Control (QC) team.
- Maintain and improve the company’s Quality Management System (QMS).
- Ensure products meet customer specifications, engineering drawings, and quality requirements. ...
Posted
2 days ago
MYR2,000 - MYR3,000 Per Month
- Conduct routine inspections and performance testing of solar cell modules and arrays
- Perform electrical wiring and interconnection of solar panels, inverters and other system components
- Troubleshoot and diagnose electrical faults and mechanical issues within solar PV systems ...
Posted
3 days ago
Bending Technician/ Operator
MYR1,700 - MYR3,000 Per Month
- To operate bending machines with minimum supervision.
- To ensure bending process are carried out in accordance with specified requirements.
- To be responsible for safety handling of bending machines. ...
Be an early applicant!
Posted
11 days ago
Marketing & Engineering
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Review customer engineering drawings, specifications and requirements for quotation purposes.
- Understand machining processes such as CNC milling, CNC turning and conventional machining.
- Evaluate drawing requirements including material, dimensions, tolerances, surface finish and special requirements. ...
Posted
3 days ago
MYR2,000 - MYR2,800 Per Month
+Additional Compensation
- Carry out modification works such as wiring/electrical works, rewiring, installation of lights, circuits, and electrical socket supplies for household equipment, and troubleshooting wiring issues.
- Perform air conditioning maintenance and servicing, including troubleshooting and minor repairs.
- Knowledge of smart meter installation is an added advantage. ...
Be an early applicant!
Posted
16 days ago
Undisclosed
- Oversee or assist superior in coordinating the in-house/on-site assembly & installation of company products.
- Communicate and solve problems with counterparts from other departments to ensure timely coordination of engineering, purchasing and production.
- Be an interface point to customer counterparts for assembly and site installation. ...
Be an early applicant!
Posted
6 days ago
Undisclosed
- To implement Quality Management System & Document Control System.
- To monitor & improve document control(Engineering Change Notice, drawing/BOM approval & distribution, forms & format control).
- To plan, schedule & conduct internal audits. ...
Be an early applicant!
Posted
6 days ago