Tig Jobs in Bayan Lepas - October 2026 - Urgent Hiring
Showing 158 jobs results for
"tig"
in Bayan Lepas
MYR8,000 - MYR15,000 Per Month
- Responsible for the overall calculation and design of HVAC systems in accordance with project requirements and client specifications and national codes, including but not limited to air-conditioning system, de-smoke systems and process exhaust systems, etc.
- Lead the team to complete the detailed design of HVAC systems, review design drawings, technical parameters, and solve key technical problems in the design process;
- Track cutting-edge HVAC technologies in the industry, promote technology optimization and application, and reduce project energy consumption and operation costs; ...
Be an early applicant!
Posted
6 days ago
Plumbing Design Engineer
MYR8,000 - MYR15,000 Per Month
- Responsible for the overall calculation and design of Plumbing systems including but not limited to domestic（cold/hot) water supply, industrial city water supply, sanitary drainage, storm water, fire hydrant, fire sprinkler, fire extinguisher, fire suppression, and RODI/WWTP supporting systems in accordance with project requirements, client specifications and relevant GB codes and international standards;
- Lead the team to complete the concept design, preliminary design, detailed design and IFC of plumbing systems, review design drawings, technical parameters, and solve key technical problems in the design process;
- Leading and coordinating discipline interface; ...
Be an early applicant!
Posted
6 days ago
Senior Mechanical Design Engineer
MYR8,000 - MYR15,000 Per Month
- Responsible for the overall calculation and design of mechanical systems in accordance with project requirements and client specifications and national codes, including but not limited to chilled water, hot water, cooling water, steam, natural gas, diesel, and PCW systems, etc.
- Lead the team to complete the concept design, preliminary design, detailed design and IFC of mechanical systems, review design drawings, technical parameters, and solve key technical problems in the design process;
- Track cutting-edge mechanical technologies in the industry, promote technology optimization and application, and reduce project energy consumption and operation costs; ...
Posted
10 days ago
Senior Electrical Design Engineer
MYR10,000 - MYR20,000 Per Month
- Responsible for overall power supply and distribution system calculation and design according to project and client specifications, and national codes, including but limited to High-Voltage and Low-Voltage system, lighting, lightning system and fire protection electrical system, etc.
- Responsible for concept electrical design research in the early project phase; formulating viable electrical design schemes in accordance with the client requirements and relevant specifications, conducting client communication reporting as well as overseeing the consolidation, analysis, and synthesis of electrical demand information;
- Lead the selection of electrical equipment, and compile detailed equipment technical parameters and specifications; ...
Be an early applicant!
Posted
10 days ago
MYR2,800 - MYR3,200 Per Month
Fresh Graduates
- What You’ll Work On
- PCB Design Support – 35%Support schematic and PCB layout preparation using Altium Designer, and prepare Gerber, stencil and other production-ready files.
- Mechanical Design Support – 25%Create and update 3D designs and technical drawings, including files for 3D printing and laser cutting. ...
Be an early applicant!
Posted
3 days ago
Lead Process Design Engineer
MYR8,000 - MYR15,000 Per Month
- Lead the process design and optimization of water treatment systems, specialty gas supply systems and chemical delivery systems, formulate technical schemes, process flows and equipment selection standards;
- Responsible for semiconductor/ pharmaceutic project process systems (including UPW, Wastewater treatment, special gas and chemical distribution) calculation and drawings based on project criteria and client/national codes;
- Manage the process team in project implementation, review design drawings, technical parameters and construction schemes, and solve key process problems in system commissioning and operation; ...
Be an early applicant!
Posted
10 days ago
MYR3,000 - MYR5,000 Per Month
- Review project drawings, specifications and construction documents.
- Monitor project progress, quality of work and compliance with approved drawings and specifications.
- Prepare and maintain project documentation, reports, site records and progress updates. ...
Posted
10 days ago
Hookup Design Coordinator/ Manager/Tool Install
MYR10,000 - MYR20,000 Per Month
- Manage and mentor a multi-racial team of discipline leads (Mechanical, CDA, Electrical, Exhaust, UPW, PDS, Bulk & Special Gas, Chemical, Slurry, I&C, etc.) across Penang and Kulim sites.
- Conduct regular 1:1s, provide technical career coaching, and oversee performance reviews in line with Malaysian labor practices.
- Lead hook-up design interface coordination with base built system, cleanroom interior decoration and Tool moving-in schedule, ensuring alignment of space, clear height, floor loading, vibration, cleanliness and connection interfaces with Tool requirements. ...
Be an early applicant!
Posted
10 days ago
Undisclosed
- Monitor day-to-day inspection operations on vendors supplied products.
- To liaise with the incoming inspection team and buyer on supplier quality issues.
- Supplier quality performance monitoring, evaluation & drive for improvement. ...
Be an early applicant!
Posted
a month ago
Senior Process Design Engineer
MYR8,000 - MYR15,000 Per Month
- Lead the process design and optimization of water treatment systems, specialty gas supply systems and chemical delivery systems, formulate technical schemes, process flows and equipment selection standards;
- Responsible for semiconductor/ pharmaceutic project process systems (including UPW, Wastewater treatment, special gas and chemical distribution) calculation and drawings based on project criteria and client/national codes;
- Manage the process team in project implementation, review design drawings, technical parameters and construction schemes, and solve key process problems in system commissioning and operation; ...
Be an early applicant!
Posted
10 days ago
MYR2,100 - MYR4,000 Per Month
Fresh Graduates
- Conducts tests, experiments and/or problem resolution associated with components, parts, products or processes/systems.
- May design and/or build tools.
- Test & Repair: Tests and calibrates and/or repairs and monitors and/or installs and diagnoses equipment, systems, and/or assemblies. ...
Posted
a month ago
MYR2,200 - MYR2,500 Per Month
+Additional Compensation
Fresh Graduates
- Perform Test sequent for unit under test, Identify and troubleshoot processes, material, or equipment issues to minimize down time and recommend solutions.
- Perform test related tasks for unit under test via Test platform provided by Company,
- Trouble shoot test unit, perform debugging for minor Test failure unit. ...
Posted
a month ago
Mechanical & Electrical Technician / Electrical Assembler
MYR2,500 - MYR3,500 Per Month
- Assemble electrical and electronic components according to technical drawings and schematics.
- Perform wiring, soldering, and testing of electrical components.
- Ensure all assembly work complies with safety and quality standards. ...
Posted
8 days ago
MYR2,500 - MYR3,500 Per Month
- Set up and operate CNC milling and/or turning machines.
- Process automation products using aluminium and plastic materials.
- Read and interpret engineering drawings. ...
Posted
8 days ago
MYR2,300 - MYR3,000 Per Month
+Additional Compensation
- Precision Trimming & Fitting: Carefully trim, adjust, and fit dental models using specialized hand tools and micro-motors.
- Surface Sanding & Finishing: Use various grades of sandpaper, burs, and rotary tools to smooth out rough edges and shape pieces to exact specifications.
- High-Shine Polishing: Polish completed dental work using polishing wheels, compounds, and steam cleaners to achieve a flawless, smooth, and high-gloss finish. ...
Posted
a month ago
MYR4,500 - MYR5,000 Per Month
Fresh Graduates
- Assist in the daily production activities, ensuring smooth operations and adherence to production schedules and quality standards.
- Support senior engineers in implementing and monitoring lean manufacturing principles and process improvement initiatives to enhance efficiency and reduce waste.
- Participate in root cause analysis for production issues and contribute to the development and implementation of corrective actions. ...
Posted
20 days ago
MYR2,300 - MYR3,500 Per Month
- Perform routine preventive maintenance and troubleshoot equipment failures to minimize downtime.
- Support daily manufacturing operations, including equipment setup and responding to equipment alarms.
- Assist engineers during process adjustments, testing, and production trials. ...
Posted
16 days ago
MYR2,500 - MYR3,300 Per Month
- Conduct functional testing on electronic module samples, including measurement of parameters such as Output Motor (V), Cut-off Output Current (A), and Cut-off Timing (S)
- Perform AM2 measurements, including analysis of Energy Curves and Spike Curves
- Support flashing of software into electronic module devices ...
Posted
2 months ago
MYR8,000 - MYR15,000 Per Month
- Responsible for the overall calculation and design of mechanical systems in accordance with project requirements and client specifications and national codes, including but not limited to chilled water, hot water, cooling water, steam, natural gas, diesel, and PCW systems, etc.
- Lead the team to complete the concept design, preliminary design, detailed design and IFC of mechanical systems, review design drawings, technical parameters, and solve key technical problems in the design process;
- Track cutting-edge mechanical technologies in the industry, promote technology optimization and application, and reduce project energy consumption and operation costs; ...
Be an early applicant!
Posted
13 days ago
MYR8,000 - MYR15,000 Per Month
- Lead the process design and optimization of water treatment systems, specialty gas supply systems and chemical delivery systems, formulate technical schemes, process flows and equipment selection standards;
- Responsible for semiconductor/ pharmaceutic project process systems (including UPW, Wastewater treatment, special gas and chemical distribution) calculation and drawings based on project criteria and client/national codes;
- Manage the process team in project implementation, review design drawings, technical parameters and construction schemes, and solve key process problems in system commissioning and operation; ...
Be an early applicant!
Posted
12 days ago
MYR10,000 - MYR20,000 Per Month
- Manage and mentor a multi-racial team of discipline leads (Mechanical, CDA, Electrical, Exhaust, UPW, PDS, Bulk & Special Gas, Chemical, Slurry, I&C, etc.) across Penang and Kulim sites.
- Conduct regular 1:1s, provide technical career coaching, and oversee performance reviews in line with Malaysian labor practices.
- Lead hook-up design interface coordination with base built system, cleanroom interior decoration and Tool moving-in schedule, ensuring alignment of space, clear height, floor loading, vibration, cleanliness and connection interfaces with Tool requirements. ...
Be an early applicant!
Posted
13 days ago
MYR3,500 - MYR5,000 Per Month
- Operate CNC turning machines to manufacture precision parts and components according to specifications
- Set up, program, and monitor CNC machines to ensure optimal performance and productivity
- Perform routine maintenance and troubleshooting on CNC machines to maintain their optimal condition ...
Posted
2 months ago
MYR5,500 - MYR6,300 Per Month
- Documents selection of components/subassemblies to deliver required performance and compliance specifications.
- Interacts with other engineering disciplines to define component requirements and/or modify component selections.
- Works under discretion of Sr Component Engineers to analyze designs to recommend optimal selection of components and/or subassemblies. ...
Posted
2 months ago
MYR10,000 - MYR20,000 Per Month
- Responsible for overall power supply and distribution system calculation and design according to project and client specifications, and national codes, including but limited to High-Voltage and Low-Voltage system, lighting, lightning system and fire protection electrical system, etc.
- Responsible for concept electrical design research in the early project phase; formulating viable electrical design schemes in accordance with the client requirements and relevant specifications, conducting client communication reporting as well as overseeing the consolidation, analysis, and synthesis of electrical demand information;
- Lead the selection of electrical equipment, and compile detailed equipment technical parameters and specifications; ...
Be an early applicant!
Posted
13 days ago
Undisclosed
- Serve as focal point of contact for customers on quality-related matters with minimal supervision.2. Ensure products meet customer specifications, drawings, and quality standards.3. Lead customer audits preparation, coordination, and follow-up on audit findings.4. Lead root cause analysis and corrective action implementation; ensure timely closure and effectiveness verification.5. Prepare and maintain quality documentation (Control Plan, Inspection Reports, FAI, PPAP documents where applicable).6. Monitor quality performance metrics and drive improvement actions based on data analysis.7. Identify process improvement opportunities and work with cross-functional teams to implement solutions.8. Provide technical guidance to QA Technicians on inspection methods and quality requirements.9. Participate in new product introduction (NPI), including pretest, first article inspection, and buyoff.10. Support QMS implementation, audit compliance, and continuous improvement initiatives.11. Handle internal non-conformance and support MRB activities.12. Ensure compliance to ISO standards, safety practices, SOP, and company policies.13. Mentor and coach E1 on quality standards and documentation best practices.
Be an early applicant!
Posted
a month ago
Undisclosed
- Testing products for safety, capacities, compliance, and performance.
- Examining and investigating specific aspects and components of products in question.
- Compiling reports on findings and testing data gathered. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Setup test equipment within the allocated time period that meet the mechanical & electrical first pass yield requirements.
- Repair equipment failures with no impact on quality as well as mechanical & electrical yield loss during and after repair.
- Complete every setup checklist, conversion checklist & intervention checklist for every setup/ downtimes. ...
Be an early applicant!
Posted
a month ago
MYR1,700 - MYR1,800 Per Month
- Responsible for reliability testing support with loading and unloading of integrated circuit devices onto biased boards and chambers activities. Ensure to meet cycle time and zero quality issue.
- Support electrical testing and data-logging of integrated circuit devices using automated test equipment.
- Bench testing and debugging of reliability test circuits / boards verification. ...
Posted
2 months ago
Undisclosed
- Develop, formulate, evaluate and execute process development and process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation or experiments to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Be an early applicant!
Posted
a month ago
MYR2,000 - MYR2,500 Per Month
- Demonstrates strong attention to detail and precision in selecting specifications and executing measurements in accordance with correct CD definitions. Familiarity with process layer structures (e.g., nitride, spacer) is an added advantage.
- Shows patience and consistency in performing repetitive measurement tasks.
- Possesses strong analytical thinking, including sound decision-making on whether CDs should be corrected or retained. Able to assess if available specifications provide sufficient information to proceed with CD corrections. ...
Posted
2 months ago
Job searches related to “Tig”