52 Chemical Analysis Jobs - September 2026 - Urgent Hiring
Showing 52 jobs results for
"chemical analysis"
MYR2,500 - MYR4,000 Per Month
Fresh Graduates
Bukit Minyak, Pulau Pinang
- Responsible for doing sampling and perform related testing & analysis within deadline given
- Control chemical inventory and chemicals purchase, gather SDS information
- Control and improve the process of recovery and assist in production work if required ...
Be an early applicant!
Posted
24 days ago
Chat Available
Undisclosed
Fresh Graduates
- Conduct research and development activities for new and existing product
- Perform laboratory testing and product analysis
- Develop, improve, and customize emulsion properties and polymerization method ...
Be an early applicant!
Posted
17 days ago
Chat Available
Chemist / Physicist / Science Discipline
MYR2,400 - MYR4,000 Per Month
Fresh Graduates
Near Train Station
- Assist in project administration and coordination.
- Handle sales coordination and follow up on project-related matters.
- Prepare quotations, documents, reports, and other administrative paperwork. ...
Posted
8 days ago
Chat Available
Undisclosed
Fresh Graduates
- Conduct research and development activities for new and existing product
- Perform laboratory testing and product analysis
- Develop, improve, and customize emulsion properties and polymerization method ...
Posted
17 days ago
MYR3,000 - MYR3,600 Per Month
- Perform electrical validation and fault isolation on failed products.
- Identify and analyze physical defects related to electrical failures.
- Evaluate assembly, fabrication, and substrate processes to determine root causes of failure. ...
Be an early applicant!
Posted
a month ago
Chat Available
Waste Water Treatmeant Plant (WWTP/IETS) Technician
Waste Water Treatmeant Plant (WWTP/IETS) Technician Waste Water Treatmeant Plant (WWTP/IETS) Technician
Company Confidential
MYR3,000 - MYR5,000 Per Month
- Job description
- · System Operations: Operate, monitor, and control IETS/wastewater treatment plant equipment across all unit processes and operations to ensure optimal performance.
- · Routine Inspections: Conduct regular plant rounds and inspections to observe process conditions, record operating data, and identify operational abnormalities. ...
Be an early applicant!
Posted
5 days ago
Chat Available
Waste Water Treatmeant Plant (WWTP/IETS) Technician
Waste Water Treatmeant Plant (WWTP/IETS) Technician Waste Water Treatmeant Plant (WWTP/IETS) Technician
Company Confidential
MYR3,000 - MYR5,000 Per Month
- Job description
- · System Operations: Operate, monitor, and control IETS/wastewater treatment plant equipment across all unit processes and operations to ensure optimal performance.
- · Routine Inspections: Conduct regular plant rounds and inspections to observe process conditions, record operating data, and identify operational abnormalities. ...
Be an early applicant!
Posted
6 days ago
MYR3,800 - MYR5,000 Per Month
- Ensure process readiness through effective FMEA, Control Plan, OCAP, Work Instruction, Process Spec & Check List including EHS requirements.
- Monitor and drive improvement on key process health indicators (Yield/Defect, Quality etc).
- Drive Statistical Process Control and improvement to meet/exceed process Cpk target. ...
Be an early applicant!
Posted
a month ago
MYR6,000 - MYR9,000 Per Month
- Prepare annual process work plans based on the company's annual product work plan, and guide and compile process standards, manuals, quality control points, and other process management documents.
- Review the economic and technical rationality of product technical requirements, the rationality and feasibility of product structural relationships, the economic and technical rationality of proposed material selection, and the quality of assembly and processing performance, among other process design aspects.
- Guide and review the preparation of new product process plans, prototype trial production process plans, small-batch trial production process plans, and mass production process plans, as well as product process routes, process cards, process diagrams, general process codes, and work instructions. ...
Be an early applicant!
Posted
a month ago
Chat Available
MYR3,800 - MYR5,000 Per Month
- Ensure process readiness through effective FMEA, Control Plan, OCAP, Work Instruction, Process Spec & Check List including EHS requirements.
- Monitor and drive improvement on key process health indicators (Yield/Defect, Quality etc).
- Drive Statistical Process Control and improvement to meet/exceed process Cpk target. ...
Be an early applicant!
Posted
5 days ago
MYR3,000 - MYR3,600 Per Month
- Perform electrical validation and fault isolation on failed products.
- Identify and analyze physical defects related to electrical failures.
- Evaluate assembly, fabrication, and substrate processes to determine root causes of failure. ...
Be an early applicant!
Posted
10 days ago
Chat Available
MYR3,800 - MYR5,000 Per Month
- Ensure process readiness through effective FMEA, Control Plan, OCAP, Work Instruction, Process Spec & Check List including EHS requirements.
- Monitor and drive improvement on key process health indicators (Yield/Defect, Quality etc).
- Drive Statistical Process Control and improvement to meet/exceed process Cpk target. ...
Be an early applicant!
Posted
a month ago
Chat Available
MYR3,000 - MYR3,600 Per Month
- Perform electrical validation and fault isolation on failed products.
- Identify and analyze physical defects related to electrical failures.
- Evaluate assembly, fabrication, and substrate processes to determine root causes of failure. ...
Posted
a month ago
Chat Available
MYR3,000 - MYR4,500 Per Month
Near Train Station
- Conduct testing and analysis on raw materials, in-process products, and finished goods.
- Monitor product quality and ensure compliance with company and industry standards.
- Prepare, review, and maintain quality documents, SOPs, reports, and records. ...
Posted
a month ago
Undisclosed
- Set up and sustain physical, electrical, chemical failure analysis equipment and operation such as SIMS, optical microscope, SEM/FIB/TEM with EDX, AFM, u-PL tools according project timeline and department KPI.Define methodology, perform routine/advanced sample preparation and failure analysis with resources management when applicable for FA requests (e.g. from new product introduction, production failures, yield improvement, reliability failures, and customer returns, these may include technical consultancy, failure analysis report writing and review).Plan and improve failure analysis capability and capacity continuously.Continually improve Failure Analysis works to ensure its efficiency and compliance.Sustain laboratory activities and actively provide technical advice and guidance to FA technicians in a systematic way.Ensure compliance (e.g. 5S, safety, ESD, cost compliance, radiation protection, laser protection, passing audit and deviation correction).Foster collaboration and positive culture.Perform other tasks as required by superiors and act as proxy as necessary.
Be an early applicant!
Posted
a month ago
Undisclosed
- Set up and sustain physical, electrical, chemical failure analysis equipment and operation such as SIMS, optical microscope, SEM/FIB/TEM with EDX, AFM, u-PL tools according project timeline and department KPI.Define methodology, perform routine/advanced sample preparation and failure analysis with resources management when applicable for FA requests (e.g. from new product introduction, production failures, yield improvement, reliability failures, and customer returns, these may include technical consultancy, failure analysis report writing and review).Plan and improve failure analysis capability and capacity continuously.Continually improve Failure Analysis works to ensure its efficiency and compliance.Sustain laboratory activities and actively provide technical advice and guidance to FA technicians in a systematic way.Ensure compliance (e.g. 5S, safety, ESD, cost compliance, radiation protection, laser protection, passing audit and deviation correction).Foster collaboration and positive culture.Perform other tasks as required by superiors and act as proxy as necessary.
Be an early applicant!
Posted
a month ago
Undisclosed
- Set up and sustain physical, electrical, chemical failure analysis equipment and operation such as SIMS, optical microscope, SEM/FIB/TEM with EDX, AFM, u-PL tools according project timeline and department KPI.Define methodology, perform routine/advanced sample preparation and failure analysis with resources management when applicable for FA requests (e.g. from new product introduction, production failures, yield improvement, reliability failures, and customer returns, these may include technical consultancy, failure analysis report writing and review).Plan and improve failure analysis capability and capacity continuously.Continually improve Failure Analysis works to ensure its efficiency and compliance.Sustain laboratory activities and actively provide technical advice and guidance to FA technicians in a systematic way.Ensure compliance (e.g. 5S, safety, ESD, cost compliance, radiation protection, laser protection, passing audit and deviation correction).Foster collaboration and positive culture.Perform other tasks as required by superiors and act as proxy as necessary.
Be an early applicant!
Posted
a month ago
Undisclosed
- Set up and sustain physical, electrical, chemical failure analysis equipment and operation such as SIMS, optical microscope, SEM/FIB/TEM with EDX, AFM, u-PL tools according project timeline and department KPI.Define methodology, perform routine/advanced sample preparation and failure analysis with resources management when applicable for FA requests (e.g. from new product introduction, production failures, yield improvement, reliability failures, and customer returns, these may include technical consultancy, failure analysis report writing and review).Plan and improve failure analysis capability and capacity continuously.Continually improve Failure Analysis works to ensure its efficiency and compliance.Sustain laboratory activities and actively provide technical advice and guidance to FA technicians in a systematic way.Ensure compliance (e.g. 5S, safety, ESD, cost compliance, radiation protection, laser protection, passing audit and deviation correction).Foster collaboration and positive culture.Perform other tasks as required by superiors and act as proxy as necessary.
Be an early applicant!
Posted
a month ago
Undisclosed
- Set up and sustain physical, electrical, chemical failure analysis equipment and operation such as SIMS, optical microscope, SEM/FIB/TEM with EDX, AFM, u-PL tools according project timeline and department KPI.Define methodology, perform routine/advanced sample preparation and failure analysis with resources management when applicable for FA requests (e.g. from new product introduction, production failures, yield improvement, reliability failures, and customer returns, these may include technical consultancy, failure analysis report writing and review).Plan and improve failure analysis capability and capacity continuously.Continually improve Failure Analysis works to ensure its efficiency and compliance.Sustain laboratory activities and actively provide technical advice and guidance to FA technicians in a systematic way.Ensure compliance (e.g. 5S, safety, ESD, cost compliance, radiation protection, laser protection, passing audit and deviation correction).Foster collaboration and positive culture.Perform other tasks as required by superiors and act as proxy as necessary.
Be an early applicant!
Posted
a month ago
Chat Available
Waste Water Treatmeant Plant (WWTP/IETS) Technician
Waste Water Treatmeant Plant (WWTP/IETS) Technician Waste Water Treatmeant Plant (WWTP/IETS) Technician
Company Confidential
MYR3,000 - MYR5,000 Per Month
- Job description
- · System Operations: Operate, monitor, and control IETS/wastewater treatment plant equipment across all unit processes and operations to ensure optimal performance.
- · Routine Inspections: Conduct regular plant rounds and inspections to observe process conditions, record operating data, and identify operational abnormalities. ...
Posted
6 days ago
Chat Available
MYR6,000 - MYR9,000 Per Month
- Prepare annual process work plans based on the company's annual product work plan, and guide and compile process standards, manuals, quality control points, and other process management documents.
- Review the economic and technical rationality of product technical requirements, the rationality and feasibility of product structural relationships, the economic and technical rationality of proposed material selection, and the quality of assembly and processing performance, among other process design aspects.
- Guide and review the preparation of new product process plans, prototype trial production process plans, small-batch trial production process plans, and mass production process plans, as well as product process routes, process cards, process diagrams, general process codes, and work instructions. ...
Posted
a month ago
Chat Available
Undisclosed
- Set up and sustain physical, electrical, chemical failure analysis equipment and operation such as SIMS, optical microscope, SEM/FIB/TEM with EDX, AFM, u-PL tools according project timeline and department KPI.Define methodology, perform routine/advanced sample preparation and failure analysis with resources management when applicable for FA requests (e.g. from new product introduction, production failures, yield improvement, reliability failures, and customer returns, these may include technical consultancy, failure analysis report writing and review).Plan and improve failure analysis capability and capacity continuously.Continually improve Failure Analysis works to ensure its efficiency and compliance.Sustain laboratory activities and actively provide technical advice and guidance to FA technicians in a systematic way.Ensure compliance (e.g. 5S, safety, ESD, cost compliance, radiation protection, laser protection, passing audit and deviation correction).Foster collaboration and positive culture.Perform other tasks as required by superiors and act as proxy as necessary.
Posted
a month ago
Chat Available
Undisclosed
- Set up and sustain physical, electrical, chemical failure analysis equipment and operation such as SIMS, optical microscope, SEM/FIB/TEM with EDX, AFM, u-PL tools according project timeline and department KPI.Define methodology, perform routine/advanced sample preparation and failure analysis with resources management when applicable for FA requests (e.g. from new product introduction, production failures, yield improvement, reliability failures, and customer returns, these may include technical consultancy, failure analysis report writing and review).Plan and improve failure analysis capability and capacity continuously.Continually improve Failure Analysis works to ensure its efficiency and compliance.Sustain laboratory activities and actively provide technical advice and guidance to FA technicians in a systematic way.Ensure compliance (e.g. 5S, safety, ESD, cost compliance, radiation protection, laser protection, passing audit and deviation correction).Foster collaboration and positive culture.Perform other tasks as required by superiors and act as proxy as necessary.
Posted
a month ago
Chat Available
Undisclosed
- Set up and sustain physical, electrical, chemical failure analysis equipment and operation such as SIMS, optical microscope, SEM/FIB/TEM with EDX, AFM, u-PL tools according project timeline and department KPI.Define methodology, perform routine/advanced sample preparation and failure analysis with resources management when applicable for FA requests (e.g. from new product introduction, production failures, yield improvement, reliability failures, and customer returns, these may include technical consultancy, failure analysis report writing and review).Plan and improve failure analysis capability and capacity continuously.Continually improve Failure Analysis works to ensure its efficiency and compliance.Sustain laboratory activities and actively provide technical advice and guidance to FA technicians in a systematic way.Ensure compliance (e.g. 5S, safety, ESD, cost compliance, radiation protection, laser protection, passing audit and deviation correction).Foster collaboration and positive culture.Perform other tasks as required by superiors and act as proxy as necessary.
Posted
a month ago
Undisclosed
- Provide expert guidance through advice on technical safety standards, regulations, and best practices across projects and operations in PETROS.
- Develop Safety Strategies & Procedures and create and maintain technical safety guidelines and standards.
- Collaborate with engineering, operations, and HSE teams to integrate safety into all phases of projects including supporting Incident Investigation by participating in root cause analysis and recommending corrective actions for technical safety-related incidents. ...
Be an early applicant!
Posted
3 months ago
Chat Available
MYR2,500 - MYR4,000 Per Month
Fresh Graduates
Bukit Minyak, Pulau Pinang
- Responsible for doing sampling and perform related testing & analysis within deadline given
- Control chemical inventory and chemicals purchase, gather SDS information
- Control and improve the process of recovery and assist in production work if required ...
Posted
24 days ago
Undisclosed
Near Train Station
- Lead production technology studies for oil and gas fields, including production optimization, well performance analysis, and production forecasting.
- Monitor and optimize production rates, well productivity, and field performance to maximize hydrocarbon recovery.
- Analyze well behavior using production surveillance data, nodal analysis, pressure transient analysis, and production system modelling. ...
Strong knowledge of production technology and production engineering principles
including well performance analysis and nodal analysis
Be an early applicant!
Posted
2 months ago
Undisclosed
- Provide expert guidance through advice on technical safety standards, regulations, and best practices across projects and operations in PETROS.
- Develop Safety Strategies & Procedures and create and maintain technical safety guidelines and standards.
- Collaborate with engineering, operations, and HSE teams to integrate safety into all phases of projects including supporting Incident Investigation by participating in root cause analysis and recommending corrective actions for technical safety-related incidents. ...
Be an early applicant!
Posted
3 months ago
MYR3,000 - MYR3,600 Per Month
- Perform electrical validation and fault isolation on failed products.
- Identify and analyze physical defects related to electrical failures.
- Evaluate assembly, fabrication, and substrate processes to determine root causes of failure. ...
Be an early applicant!
Posted
10 days ago
MYR3,000 - MYR3,600 Per Month
- Perform electrical validation and fault isolation on failed products.
- Identify and analyze physical defects related to electrical failures.
- Evaluate assembly, fabrication, and substrate processes to determine root causes of failure. ...
Be an early applicant!
Posted
10 days ago