Engineer Jobs in Pulau Pinang - September 2026 - Urgent Hiring
Showing 2,566 jobs results for
"engineer"
in Pulau Pinang
MYR2,000 - MYR2,500 Per Month
- Operate, monitor, and maintain production machines to ensure smooth daily operations
- Perform routine machine checks, basic troubleshooting, and preventive maintenance
- Assist in machine setup, changeover, and adjustment during production runs ...
Be an early applicant!
Posted
6 hours ago
Undisclosed
- To establish build sequence and production workflow.2. To create Work Instruction of the required process in the production floor.3. To assess the required jig, fixture and tools.4. To create PFMEA, control plan and risk assesment.5. Provide inputs and support IE to optimize production layout.6. To provide solutions and support for quality issue affecting production deliveries.7. To liaise with engineering, material, PM and MIS on BOM/ drawing/design changes/issues.8. To enchance processing techniques and methods applied in production floor.9. Drive and develop new process improvements to reduce cost and increase productivity.10. To provide training to production staff on the process, work instruction and improvement implementation to the production floor.11. Analysis of production data for productivity improvement.12. To lead/guide/train Process Engineer level 1,2, 3 on process engineering and line improvement.13. To comply with all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to general safety practices, standard operating procedure, work instructions, policies and guidelines provided by the company.14. Other duties and assignments as instructed by superiors from time to time.
Be an early applicant!
Posted
11 days ago
Undisclosed
- Monitor day-to-day inspection operations on vendors supplied products.
- To liaise with the incoming inspection team and buyer on supplier quality issues.
- Supplier quality performance monitoring, evaluation & drive for improvement. ...
Be an early applicant!
Posted
11 days ago
Undisclosed
- Monitor day-to-day inspection operations on vendors supplied products.
- To liaise with the incoming inspection team and buyer on supplier quality issues.
- Supplier quality performance monitoring, evaluation & drive for improvement. ...
Be an early applicant!
Posted
16 days ago
Undisclosed
- Complete mechanical assembly/electrical assembly with guidance by the senior technician, team leader, supervisor and/or engineering, installation and testing of equipment to time deadlines.2. Assemble and integrate a variety of mechanical and electrical assemblies. 3. Obtain and verify kitted (pre-picked) details parts and assemblies were issued correctly by comparing part numbers and quantities to drawing(s).4. Follow oral/written instructions provided by the senior technician, team leader, supervisor and/or engineering to complete assembly tasks.5. Ensure that parts issued are free of visible defects.6. Check work after completion of each operation in job and/or completed job to ensure assembly is complete per drawing, that there are no defects and that the work area is clean.7. Travel to customer sites and carry out installation, servicing work and training as scheduled.8. Other duties and assignments as instructed by superiors from time to time.9. Perform On Site Customer support assign by the Superior or the management.10. To comply to all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to general safety practices, standard operating procedure, work instructions, policies and guidelines provided by the company.
Be an early applicant!
Posted
11 days ago
MYR2,200 - MYR2,500 Per Month
Fresh Graduates
- Perform product testing, qualification, and failure analysis to support new product introductions, engineering evaluations, and customer requirements.
- Execute engineering qualification plans including RMA investigations, assembly qualifications, production sampling, and product validation activities.
- Support system-level debugging using diagnostic software, bus analyzers, and engineering test tools. ...
Be an early applicant!
Posted
16 days ago
Undisclosed
- Performing daily, weekly, monthly, and scheduled preventive maintenance activities.
- Performing corrective maintenance and repair work during equipment breakdowns.
- Conducting equipment inspection and identifying abnormal conditions. ...
Be an early applicant!
Posted
16 days ago
Service Engineer- Mandarin Speaker Needed
MYR2,500 - MYR4,000 Per Month
George Town, Pulau Pinang
- Take charge of assigned products and ensure smooth operations while providing continuous service support.
- Perform installation and commissioning of machines/equipment on-site.
- Carry out preventive maintenance, troubleshooting, and repair of equipment in-house or on-site. ...
Posted
11 days ago
MYR3,000 - MYR4,500 Per Month
- Operate CNC laser cutting machines to cut sheet metal according to engineering drawings and specifications.
- Load and unload raw materials (metal sheets) onto the laser cutting machine.
- Set up machine parameters such as cutting speed, power, and focus according to material type and thickness. ...
Be an early applicant!
Posted
10 days ago
Undisclosed
- To perform incoming, in-process, and final inspection based on requirements.2. To ensure inspection activities comply with specifications and drawings.3. To detect and properly segregate non-conforming parts.4. To maintain inspection records and reports accurately.5. To support internal calibration and verification activities.6. To monitor and maintain inspection tools and equipment condition.7. To communicate quality issues with production team for immediate action.8. To verify corrective actions on non-conforming issues.9. To perform basic data collection for quality analysis.10. To support QA Engineer in investigation and problem-solving activities.11. To assist in internal audits and documentation checks.12. To ensure compliance with ISO procedures and quality standards.13. To provide guidance to junior technicians during inspection.14. To support improvement initiatives on inspection efficiency.15. To prepare daily or weekly inspection reports when required.
Be an early applicant!
Posted
16 days ago
MYR3,000 - MYR4,500 Per Month
George Town, Pulau Pinang
- Performing analysis, design and drafting for building, structure, infrastructure, foundation and ensuring the optimum engineering design solution and details for construction use.
- Preparing cost estimation, bill of quantities, tender documents and assessment report.
- Liaison with client, consultants, authorities, contractors and suppliers to understand the project requirements and expectations. ...
Posted
2 days ago
MYR4,500 - MYR5,000 Per Month
Fresh Graduates
- Assist in the daily production activities, ensuring smooth operations and adherence to production schedules and quality standards.
- Support senior engineers in implementing and monitoring lean manufacturing principles and process improvement initiatives to enhance efficiency and reduce waste.
- Participate in root cause analysis for production issues and contribute to the development and implementation of corrective actions. ...
Posted
3 days ago
MYR2,300 - MYR3,500 Per Month
- Establish and maintain product requirements, inspection criteria, and testing procedures for Colour Coil products.
- Monitor and control manpower, inspection, testing, and production processes to ensure product quality and consistency.
- Manage non-conformance issues, including investigation, corrective action, and proper disposition. ...
Be an early applicant!
Posted
a day ago
MYR3,500 - MYR4,500 Per Month
Fresh Graduates
- To assist the Construction/Project Manager to plan, monitor and control daily works at the project sites
- To implement all policies, activities, procedures, instructions as relevant and required by the quality management system.
- To ensure that project operations and document control procedures are adhered to. ...
Be an early applicant!
Posted
2 days ago
Company Confidential
MYR5,000 - MYR6,000 Per Month
- This role involves establishing and maintaining quality systems, managing process quality control, analyzing quality issues, and managing quality data to ensure continuous improvement and effective operations across manufacturing.
- Quality system establishment and maintenance: Participate in the construction and maintenance of the quality system, compile procedure documents, operation instructions and record forms, regularly organize internal audits and management reviews to ensure the continuous and effective operation of the system;
- Process quality control: Participate in quality analysis and improvement, supervise the implementation and effectiveness of analysis and improvement, and carry out quality prevention. Take the lead in handling production anomalies in the manufacturing department, output corrective and preventive measures, and follow up on their closed-loop implementation. ...
Be an early applicant!
Posted
2 days ago
Undisclosed
Fresh Graduates
- Assemble jig & fixture components and automation systems according to engineering drawings and specifications.
- Perform mechanical fitting, alignment, and installation of parts.
- Conduct functional testing and ensure all assemblies meet the required quality standards. ...
Posted
15 days ago
MYR2,000 - MYR2,800 Per Month
- Assist in machine assembly, installation, testing, and commissioning activities.
- Perform preventive maintenance, servicing, and troubleshooting of machinery and equipment.
- Attend customer sites for installation, maintenance, repair, and technical support. ...
Posted
13 days ago
MYR2,500 - MYR3,000 Per Month
Fresh Graduates
- Cut, bend, shape, and assemble PFA plastic tubing according to customer orders and technical drawings.
- Operate simple production tools, machines, and heating equipment safely.
- Measure (like rulers or calipers) and inspect finished tubing for defects. ...
Be an early applicant!
Posted
3 days ago
MYR1,700 - MYR2,500 Per Month
- Carry out installation, upgrade, maintenance, testing and commissioning works at site as assigned.
- Perform troubleshooting and corrective works for CCTV systems and related equipment.
- Support site activities according to project schedules and requirements. ...
-Willing and able to travel between project sites within the Northern Zone.
-Willing to work after hours
+4
Be an early applicant!
Posted
20 days ago
MYR5,000 - MYR6,000 Per Month
- This role involves establishing and maintaining quality systems, managing process quality control, analyzing quality issues, and managing quality data to ensure continuous improvement and effective operations across manufacturing.
- Quality system establishment and maintenance: Participate in the construction and maintenance of the quality system, compile procedure documents, operation instructions and record forms, regularly organize internal audits and management reviews to ensure the continuous and effective operation of the system;
- Process quality control: Participate in quality analysis and improvement, supervise the implementation and effectiveness of analysis and improvement, and carry out quality prevention. Take the lead in handling production anomalies in the manufacturing department, output corrective and preventive measures, and follow up on their closed-loop implementation. ...
Be an early applicant!
Posted
a day ago
Technical Service Engineer (Mandarin Speaker)
MYR2,500 - MYR4,000 Per Month
George Town, Pulau Pinang
- Take charge of assigned products and ensure smooth operations while providing continuous service support.
- Perform installation and commissioning of machines/equipment on-site.
- Carry out preventive maintenance, troubleshooting, and repair of equipment in-house or on-site. ...
Posted
11 days ago
MYR2,000 - MYR3,000 Per Month
- Conduct routine inspections and performance testing of solar cell modules and arrays
- Perform electrical wiring and interconnection of solar panels, inverters and other system components
- Troubleshoot and diagnose electrical faults and mechanical issues within solar PV systems ...
Posted
4 days ago
Bending Technician/ Operator
MYR1,700 - MYR3,000 Per Month
- To operate bending machines with minimum supervision.
- To ensure bending process are carried out in accordance with specified requirements.
- To be responsible for safety handling of bending machines. ...
Posted
15 days ago
Undisclosed
- Responsible for the daily operation and maintenance of the MES systemsystem abnormality problem solving, authority management, troubleshooting, etc.)
- Collect business department needs and organize system business processes, analysis, design feasible solutions, and cooperate with business departments to improve the construction of MES systems
- Responsible for functional testing, user training, problem collection and feedback ...
Posted
a month ago
MYR2,000 - MYR5,000 Per Month
- • 协助机械设计及绘制技术图纸• 操作手动／传统铣床• 阅读及理解基本机械图纸• 按照要求进行加工及制作• 确保工作质量、准确度及安全• 负责机器、工具及工作区域的日常维护• 配合团队完成主管安排的工作
Posted
11 days ago
Marketing & Engineering
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Review customer engineering drawings, specifications and requirements for quotation purposes.
- Understand machining processes such as CNC milling, CNC turning and conventional machining.
- Evaluate drawing requirements including material, dimensions, tolerances, surface finish and special requirements. ...
Posted
4 days ago
Mechanical & Electrical Technician / Electrical Assembler
MYR2,500 - MYR3,500 Per Month
- Assemble electrical and electronic components according to technical drawings and schematics.
- Perform wiring, soldering, and testing of electrical components.
- Ensure all assembly work complies with safety and quality standards. ...
Posted
9 days ago
MYR2,000 - MYR2,800 Per Month
+Additional Compensation
- Carry out modification works such as wiring/electrical works, rewiring, installation of lights, circuits, and electrical socket supplies for household equipment, and troubleshooting wiring issues.
- Perform air conditioning maintenance and servicing, including troubleshooting and minor repairs.
- Knowledge of smart meter installation is an added advantage. ...
Be an early applicant!
Posted
20 days ago
MYR3,000 - MYR4,000 Per Month
- Assessing project feasibility through product drawing and B.O.M review. (including built cycle time, avaibility of tools & equipment, non-recurring engineering (NRE) cost etc.)
- Set up the bill of materials (B.O.M) for the request for quotation (RFQ) stage in the Agile system.
- Establishing System Bill of Materials (B.O.M) ...
Posted
a month ago
MYR2,000 - MYR3,000 Per Month
Fresh Graduates
- Diagnosing errors or technical problems and determining proper solutions
- Perform routine repair and maintenance tasks, such as replacing spark plugs or changing the oil.
- Repair engines and transmissions, and perform minor repairs to the body ...
Be an early applicant!
Posted
a day ago