1,000+ Juruteknik Mekanikal Jobs in Malaysia | Job Vacancies | August 2026 | Maukerja

Paparan 1,032 hasil carian kerja kosong untuk "juruteknik mekanikal"
Jangan lepaskan peluang untuk kerja Juruteknik Mekanikal terkini!
Boleh Sembang
MYR2,200 - MYR2,800 Sebulan
  • Assist in the design, development, and testing of mechanical components and systems.
  • Support senior engineers in project execution and problem-solving.
  • Conduct research and gather data for engineering projects. ...

Jadilah pemohon terawal!

Posted
10 days ago
Boleh Sembang
MYR2,500 - MYR3,000 Sebulan
  • Track tooling calibration work orders and shipments
  • Maintain inventory of kits, supplies, and warranty records
  • Update tooling databases with purchases and calibration status ...
Organizational Multitasking
+1

Jadilah pemohon terawal!

Posted
8 days ago
Boleh Sembang
SGD2,500 - SGD3,500 Sebulan

Tuas West Road (EW32), approximately 49 minutes by bus and walking, Tuas West Road (EW32), approximately 49 minutes by bus and walking

  • Perform servicing, maintenance and repair of cranes and lifting systems at customer sites.
  • Carry out installation and commissioning of crane-related equipment and systems.
  • Conduct load testing and relevant operational checks. ...
Posted
15 days ago
MYR1,700 - MYR3,000 Sebulan
Graduan Baru
  • Installing, maintaining, repairing, and servicing certain equipment and facilities, including air conditioning systems and units.
  • Own Teamwork, Job Responsibility
  • Follow Instruction. ...
Installation Overhaul
+5

Jadilah pemohon terawal!

Posted
5 days ago
premium banner
Boleh Sembang
MYR2,500 - MYR4,000 Sebulan
  • Perform inspection, diagnosis, troubleshooting, servicing, and repair of heavy machinery such as boom lifts, scissor lifts, forklifts, and related equipment.
  • Carry out scheduled preventive maintenance to ensure equipment operates safely and efficiently.
  • Install, test, and commission new machinery and equipment. ...
Troubleshooting Problem-solving
+3
Posted
3 days ago
Boleh Sembang
MYR2,000 - MYR2,800 Sebulan
Graduan Baru

Ulu Tiram, 81800

  • Assist in the design, development, and testing of mechanical components and systems.
  • Support senior engineers in project execution and problem-solving.
  • Conduct research and gather data for engineering projects. ...
CAD Software SolidWorks
+8
Posted
18 days ago
Boleh Sembang
SGD1,900 - SGD2,200 Sebulan

Gul Circle (EW30), Gul Circle (EW30)

  • Perform repair and preventive maintenance on factory machinery and equipment.
  • Dismantle and assemble mechanical machinery and components when required.
  • Inspect equipment and identify mechanical faults or abnormalities. ...

Jadilah pemohon terawal!

Posted
15 days ago
premium banner
Boleh Sembang
MYR3,700 - MYR6,000 Sebulan
+Pampasan Tambahan
Graduan Baru
Dekat Stesen Tren
  • To prepare production drawings by 2D drafting or 3D modelling using CAD software for design and build to print jobs
  • To carry out manufacturing process planning using ERP
  • Prepare Bill of Material from customer drawings or in-house designs ...
CNC Machining AutoCAD
+2
Posted
8 days ago
Boleh Sembang
Undisclosed
  • Costing Estimation Engineer: Determining best production method based on engineering drawings. Estimate production timing for various process like 3 and 5 axis CNC milling, CNC lathe, Mill-turn and Wire-EDM. Continuously improvement to optimize production methods and costing.
  • CAM Programming Engineer: Create CAM programs for complex parts for 3 axis CNC milling and CNC Lathe. You are responsible for the selection of the best tool path, cutting tools and cutting strategies. You will design your own production jigs.
  • New Product Introduction Engineer: Be project manager for implementation of new products in our production. Determine all production specifications for a new product. Liaise with customers if specs are not clear. Confirm production process with engineers from other departments and source processes from outside suppliers if not available within our company. Manage a successful implementation of new products. ...
Mechanical Engineering CAD Software
+4
Posted
8 days ago
Boleh Sembang
MYR2,300 - MYR2,700 Sebulan

Ipoh, 30100

  • Work closely with internal production team and external parties on product design and compliance.
  • Prepare structural 2D and 3D drawing design and analytical software test if required.
  • Prepare engineering documentations for JPJ Technical Department or any other government authority for approval. ...

Jadilah pemohon terawal!

Posted
a month ago
Boleh Sembang
MYR1,700 - MYR2,500 Sebulan
+Pampasan Tambahan
Graduan Baru

Bandar Kuala Lumpur, WP Kuala Lumpur

Dekat Stesen Tren
  • Experience in construction industry will be an advantage.
  • Able work with consultant teams and contractor especially in Building M&E Services and related field.
  • Good interpersonal and communication skills, self-discipline with right working attitude, self-motivated, proactive, and able to work independently with meet requirement according to specification. ...
Mechanical Design CAD Software (e.g.
+2
Posted
9 days ago
Boleh Sembang
MYR2,500 - MYR3,000 Sebulan
  • Dismantle, repair, and re-install plant machinery and pumps.
  • Perform pump fitting, repacking, seal replacement, and drive realignment.
  • Carry out regular preventive maintenance and troubleshooting on site. ...
Posted
5 days ago
premium banner
Boleh Sembang
MYR2,500 - MYR3,200 Sebulan
Graduan Baru
  • Conduct site visits, surveys, and client meetings to assess project requirements.
  • Prepare and coordinate cranes and lifting equipment for site operations.
  • Develop lifting plan proposals in compliance with safety and project specifications. ...
Technical Support Equipment Maintenance
+1
Posted
3 days ago
Boleh Sembang
MYR2,300 - MYR2,700 Sebulan

Ipoh, 30100

  • Work closely with internal production team and external parties on product design and compliance.
  • Prepare structural 2D and 3D drawing design and analytical software test if required.
  • Prepare engineering documentations for JPJ Technical Department or any other government authority for approval. ...
Posted
a month ago
Boleh Sembang
MYR2,300 - MYR2,700 Sebulan

Ipoh, 30100

  • Work closely with internal production team and external parties on product design and compliance.
  • Prepare structural 2D and 3D drawing design and analytical software test if required.
  • Prepare engineering documentations for JPJ Technical Department or any other government authority for approval. ...
Posted
a month ago
premium banner
Boleh Sembang
MYR3,500 - MYR5,000 Sebulan
Dekat Stesen Tren
  • System Design: Able to Calculate heating and cooling loads, size ductwork and piping, and select equipment like chillers, air handling units, and fans.
  • Compliance and Safety: Ensure designs meet local building codes, mechanical codes, and energy standards
  • Testing and Commissioning: Inspect job sites, oversee system installation, and test equipment for proper operation. ...
Posted
2 days ago
MYR2,500 - MYR3,500 monthly
+Pampasan Tambahan
Graduan Baru
Dekat Stesen Tren
  • Assemble and manufacture industrial heating products.
  • Perform electrical wiring, termination, and component assembly.
  • Conduct product testing, including insulation resistance, continuity, resistance, and functional tests. ...
Electrical Engineering Mechanical Engineering
+4
Posted
2 days ago
MYR1,700 - MYR3,000 monthly
Dekat Stesen Tren
  • Scope of routine inspection, troubleshooting, and corrective maintenance of Mechanical, HVAC systems, etc.
  • Attend breakdowns and complaints at client site with specific time and deadlines
  • Responsible for installation, commissioning, testing, and training site equipment as assigned by superior ...
Posted
a month ago
Boleh Sembang
MYR1,000 - MYR1,001 Sebulan
  • Assisting with construction quality management, process monitoring, inspection, and quality guidance
  • Assist to supervise and inspect the M&E and infrastructure works in high-rise building construction
  • Work closely with Consultants and other departments on design, specification and contract administration ...

Jadilah pemohon terawal!

Posted
10 days ago
premium banner
Boleh Sembang
Undisclosed
Graduan Baru
Dekat Stesen Tren
  • Develops project plan by reviewing project specification and conferring with related key personnel.
  • Determines project responsibilities by identifying project phases and elements; assigning personnel to phases and elements; reviewing quotation from suppliers.
  • Determines project schedule by analyzing project plan, calculating time requirements, manpower arrangement & sequencing project elements. ...
Posted
2 days ago
Boleh Sembang
MYR1,500 - MYR6,000 Sebulan
Graduan Baru
Dekat Stesen Tren
  • Routine maintenance and cleaning of various types of aircond units
  • Maintain/service aircond.
  • Troubleshoot aircond damage. ...
Perform Routine Maintenance Inspection
+2

Jadilah pemohon terawal!

Posted
7 days ago
Boleh Sembang
Undisclosed

Singapore, Singapore

  • Maintenance & Repair: Install, maintain, and repair electrical equipment and mechanical machinery across the customer fleet
  • Troubleshooting: Diagnose and resolve operational equipment issues and electrical faults
  • System Upgrades: Plan, design, and install electrical systems, including AC/DC motor controls and PLC programming. ...
Posted
21 days ago
Boleh Sembang
MYR1,000 - MYR1,001 Sebulan
  • Assisting with construction quality management, process monitoring, inspection, and quality guidance
  • Assist to supervise and inspect the M&E and infrastructure works in high-rise building construction
  • Work closely with Consultants and other departments on design, specification and contract administration ...

Jadilah pemohon terawal!

Posted
10 days ago
Boleh Sembang
MYR2,500 - MYR5,000 Sebulan
  • Merancang, menyelia dan melaksanakan projek berkaitan sistem mekanikal
  • Menjalankan pemeriksaan, penyelenggaraan dan penambahbaikan mesin serta peralatan
  • Menganalisis dan menyelesaikan masalah teknikal berkaitan sistem mekanikal ...
Posted
23 days ago
Boleh Sembang
Undisclosed

Bandar Kuala Lumpur, WP Kuala Lumpur

Dekat Stesen Tren
  • Responsible for new project scheme design, structural design, mold review and project requirement review
  • Responsible for Mechanical design of plastic parts/Sheet meatal part/ heatsink/ die casting part, product stacking design and tolerance analysis
  • Complete related documents, drawings and BOM, Base board. ...
Teamwork Motivation
+1
Posted
14 days ago
Boleh Sembang
MYR2,000 - MYR2,001 Sebulan
+Pampasan Tambahan
Graduan Baru

KL City, WP Kuala Lumpur

Dekat Stesen Tren
  • Melaksanakan penyelenggaraan berkala sistem hvac
  • Menjalankan servis seperti mencuci coil, menukar filter dan memeriksa tekanan gas
  • Memastikan semua peralatan berfungsi dengan baik dan dalam keadaan selamat ...
Air conditioning maintenance HVAC system design
+2
Posted
25 days ago
Boleh Sembang
MYR2,500 - MYR3,500 Sebulan
  • Assist the M&E Supervisor in executing equipment operation, maintenance, and preventive maintenance plans.
  • Perform routine inspections of M&E systems, including electrical, air-conditioning, water pumps, plumbing, and drainage systems, and maintain inspection records.
  • Assist in troubleshooting equipment breakdowns and coordinate repair works with contractors. ...

Jadilah pemohon terawal!

Posted
10 days ago
Boleh Sembang
MYR2,500 - MYR3,500 Sebulan
  • Assist the M&E Supervisor in the execution of equipment operation, maintenance, and servicing plans.
  • Conduct daily inspections of M&E systems, including electrical systems, air-conditioning systems, water pumps, plumbing and drainage systems, and maintain inspection records.
  • Assist in handling unexpected equipment breakdowns, coordinating repairs, and following up with contractors’ work progress. ...

Jadilah pemohon terawal!

Posted
10 days ago
premium banner
MYR2,400 - MYR3,600 Sebulan
  • Diploma or Certificate in Mechanical or Electrical Engineering, or a related field.
  • Minimum 2 years of experience as a Mechanical or Electrical Technician, preferably in a manufacturing or industrial setting.
  • Proficient in the use of tools and equipment used in the maintenance and repair of mechanical and electrical systems. ...
Mechanical Systems Maintenance Electrical Systems Troubleshooting
+2
Posted
5 days ago
Boleh Sembang
MYR2,300 - MYR2,700 monthly

Ipoh, 30100

  • Work closely with internal production team and external parties on product design and compliance.
  • Prepare structural 2D and 3D drawing design and analytical software test if required.
  • Prepare engineering documentations for JPJ Technical Department or any other government authority for approval. ...
Posted
2 months ago