100+ Quality Assurance Quality Control Engineer Jobs - September 2026 - Urgent Hiring
Showing 100 jobs results for
"quality assurance quality control engineer"
Undisclosed
- To perform incoming, in-process, and final inspection based on requirements.2. To ensure inspection activities comply with specifications and drawings.3. To detect and properly segregate non-conforming parts.4. To maintain inspection records and reports accurately.5. To support internal calibration and verification activities.6. To monitor and maintain inspection tools and equipment condition.7. To communicate quality issues with production team for immediate action.8. To verify corrective actions on non-conforming issues.9. To perform basic data collection for quality analysis.10. To support QA Engineer in investigation and problem-solving activities.11. To assist in internal audits and documentation checks.12. To ensure compliance with ISO procedures and quality standards.13. To provide guidance to junior technicians during inspection.14. To support improvement initiatives on inspection efficiency.15. To prepare daily or weekly inspection reports when required.
Be an early applicant!
Posted
13 days ago
Undisclosed
- Report to QA Engineer/Senior QA Engineer.
- To lead the team consist of QA technicians and QA operators to carry out the daily inspection jobs.
- Daily quality inspection output efficiency monitoring and improvement. ...
Be an early applicant!
Posted
13 days ago
Forklift Driver Cum Laboratory Inspector
MYR2,000 - MYR2,800 Per Month
- Operating forklifts and other material handling equipment to move, stack, and arrange materials and goods within the warehouse facility
- Loading and unloading goods from trucks and storage areas with accuracy and care
- Inspecting forklifts and equipment before each shift to ensure they are in safe working condition ...
Posted
2 days ago
MYR1,700 - MYR3,500 Per Month
Near Train Station
- • Must be observant and very good at paying attention to detail.
- • Have a logical, methodical approach to work and must be accurate when taking measurements and recording figures.
- Responsibilities:- ...
Posted
11 days ago
MYR3,500 - MYR5,000 Per Month
KL City, WP Kuala Lumpur
Near Train Station
- Conduct site inspections based on approved drawings, material specifications and company quality standards.
- Prepare inspection reports, photographic records, defect lists and rectification follow-up reports.
- Coordinate with contractors and the site team to close defects before handover. ...
Posted
18 days ago
MYR1,800 - MYR2,500 Per Month
Fresh Graduates
- Certificate, Diploma, or Bachelor's Degree in Mechanical Engineering, Manufacturing Engineering, Precision Engineering, Mechatronics, or a related field.
- 1–3 years of experience in quality inspection within a manufacturing or CNC machining environment is preferred.
- Able to read and interpret engineering drawings, specifications, and GD&T requirements. ...
Posted
7 days ago
MYR2,000 - MYR3,000 Per Month
Fresh Graduates
- In-charge and prepare monthly / yearly Production Internal / Customer Rejects Analysis Report.
- In-charge of Minutes of Meeting for QAQC.
- In-charge of Customer Complaints and Customer Replacement Request from Sales and Costing Depts, to assist ...
Be an early applicant!
Posted
7 days ago
MYR2,500 - MYR3,500 Per Month
- Perform in-process inspection at production line.
- Conduct patrol inspection.
- Check product dimensions, appearance, and workmanship according to drawing/specification. ...
Posted
3 days ago
MYR1,800 - MYR2,000 Per Month
- To identify the priority of work orders to process per instructions of Production Supervisor/Lead or Quality Control Supervisor/Leader.
- Make sure clock in/out of the ERP system (M3) per Work Order and daily.
- Perform the following inspections and test on products/materials based on the instruction given: ...
Be an early applicant!
Posted
4 hours ago
MYR1,800 - MYR2,000 Per Month
- To identify the priority of work orders to process per instructions of Production Supervisor/Lead or Quality Control Supervisor/Leader.
- Make sure clock in/out of the ERP system (M3) per Work Order and daily.
- Perform the following inspections and test on products/materials based on the instruction given: ...
Be an early applicant!
Posted
4 hours ago
MYR1,900 - MYR2,100 Per Month
Near Train Station
- Basic knowledge of quality control processes and inspection techniques.
- Familiarity with measuring instruments such as vernier calipers and micrometers is an added advantage.
- Good attention to detail and problem-solving skills. ...
Posted
a month ago
QC Measurement Technician
MYR2,500 - MYR3,500 Per Month
- Perform incoming, in-process and outgoing quality inspections.
- Inspect die casting machined parts according to drawings, specifications and quality requirements.
- Perform dimensional measurements using measuring equipment such as vernier calipers, micrometers, height gauges and other inspection tools. ...
Posted
3 days ago
MYR3,000 - MYR3,500 Per Month
Near Train Station
- To perform testing and inspection for in-process and outgoing parts.
- To set up and configure settings accordingly for the system hardware and software based on Job Order.
- Identify and resolve product malfunctions and report to the supervisor. ...
Posted
14 days ago
MYR3,000 - MYR4,000 Per Month
Near Train Station
- Oversee effective implementation of the Quality Management System throughout the company, including any business endorsements.
- Maintain the Quality Manuals and Quality Procedures and ensure contents are appropriate for business.
- Analyses current and future procedure needs of the business. ...
Posted
13 days ago
MYR2,500 - MYR3,000 Per Month
Near Train Station
- Conduct quality checks for raw materials, production processes, and finished products.
- Ensure all products meet the company's quality standards and specifications.
- Perform product testing and inspection according to QC procedures. ...
Posted
14 days ago
MYR2,200 - MYR2,800 Per Month
+Additional Compensation
Fresh Graduates
- Assemble mechanical, electrical, pneumatic and robotic components
- Follow engineering drawings, BOMs and work instructions
- Perform wiring, alignment, calibration and testing ...
Posted
a month ago
MYR2,000 - MYR3,000 Per Month
Fresh Graduates
Near Train Station
- Assist in testing and commissioning activities at factory and site locations.
- Perform continuity, point-to-point, I/O, functional, and basic electrical testing.
- Assist in FAT and SAT preparation and testing activities. ...
Posted
19 days ago
MYR1,700 - MYR2,500 Per Month
+Additional Compensation
Fresh Graduates
- Support the FSQR team in monitoring feed safety, quality, and regulatory compliance.
- Conduct routine sampling, testing, and documentation of raw materials and finished products.
- Assist in handling customer complaints and provide technical feedback to ensure product standards. ...
Posted
7 days ago
MYR500 - MYR1,000 Per Month
Fresh Graduates
Near Train Station
- Assist the QC team in conducting quality inspections on raw materials, packaging materials, and finished products.
- Assist in monitoring production processes to ensure compliance with company quality and food safety standards.
- Support the QC team in conducting routine checks on product quality, hygiene, cleanliness, and production areas. ...
Be an early applicant!
Posted
19 days ago
MYR500 - MYR1,000 Per Month
Fresh Graduates
Near Train Station
- Assist the QC team in conducting quality inspections on raw materials, packaging materials, and finished products.
- Assist in monitoring production processes to ensure compliance with company quality and food safety standards.
- Support the QC team in conducting routine checks on product quality, hygiene, cleanliness, and production areas. ...
Be an early applicant!
Posted
19 days ago
MYR2,200 - MYR3,000 Per Month
- • Handle and setup precision measuring and testing equipment against required standard.
- • Read manufacturing blueprints and schematics for inspection requirements.
- • Carry out quality inspection (incoming, in process and/or final inspection) activities. ...
Posted
a month ago
Undisclosed
- Conduct assessment of vehicle condition (interior, exterior, odometer reading, trunk area, engine compartment).
- Note damage, or repair to frame, paint, engine, AC/heater operation, radio, navigation system, tires, etc.
- Provide accurate and complete documentation of overall vehicle condition; providing reports based on findings. ...
Posted
2 months ago
MYR1,700 - MYR2,500 Per Month
Fresh Graduates
Petaling, WP Kuala Lumpur
Near Train Station
- SKM holders (preferably technical) / SPM with manufacturing experience
- 1 Month FREE Training – Shah Alam
- Allowance: RM1,700 + EPF, SOCSO & EIS ...
Posted
a month ago
MYR2,500 - MYR3,100 Per Month
Fresh Graduates
- Salary: RM2200 - RM2800
- Benefits: Allowances (~$500) + 15AL + OT
- Working Days: Monday–Friday ...
Posted
a month ago
Quality Control Inspector
MYR2,000 - MYR2,500 Per Month
- Conduct incoming, in-process, and outgoing quality inspections.
- Operate quality inspection equipment and accurately record inspection results.
- Perform inspections according to established quality standards and procedures. ...
Posted
a month ago
QC Inspector (Mandarin Speaker)
MYR3,500 - MYR5,000 Per Month
- Perform incoming, in-process (IPQC), and final quality inspections.
- Conduct quality checks to ensure products meet company standards.
- Prepare inspection reports and maintain quality records. ...
Posted
7 days ago
MYR3,500 - MYR5,000 Per Month
+Additional Compensation
- Environmental Policy Execution
- Implement the company's Environmental Policy with a focus on manufacturing processes such CNC machining, surface treatment, and waste handling.
- Procedure Development & Control ...
Posted
3 days ago
Undisclosed
- To perform in-process inspection independently to ensure compliance with specifications.2. To verify assembly work against drawings and work instructions.3. To record and report non-conformance (NCR).4. To support troubleshooting of quality issues with production team.5. To ensure inspection activities are completed within timeline.6. To maintain proper inspection records and reports.7. To support QA Engineer in quality data collection.8. To ensure compliance with ISO, SOP, and safety requirements.9. Other duties assigned by superior.
Be an early applicant!
Posted
7 days ago
Undisclosed
- To monitor daily quality inspection on parts received, ensure specification & process requirements are met.
- Area of coverage may include vendor incoming raw material inspection, set-up buy-off, in-process inspection, out-going inspection.
- Monitor tools and equipment condition, QA room temperature and humidity tracking. ...
Be an early applicant!
Posted
7 days ago
Undisclosed
Sri Gading, Johor
- Assist Technical Engineer in new product/sample preparation, trials, and external testing.
- Conduct testing for process improvement, material evaluation, and product quality.
- Monitor performance of critical orders and collect data for process control. ...
Be an early applicant!
Posted
a month ago
Job searches related to “Quality Assurance Quality Control Engineer”