200+ CNC Machinist Jobs in Malaysia | Job Vacancies | July 2026 | Maukerja
Showing 265 jobs results for
"cnc machinist"
MYR2,800 - MYR5,000 Per Month
- •Set up, operate, and monitor CNC Milling machines to produce precision components according to engineering drawings and specifications.
- •Read and interpret technical drawings, blueprints, and work instructions.
- •Select and install appropriate cutting tools, fixtures, and machine settings. ...
Be an early applicant!
Posted
11 days ago
MYR2,500 - MYR4,000 monthly
- - Set up and adjust CNC milling and turning machines according to procedures, programs, and engineering drawings to produce machine components.
- - Perform CNC machine setup for junior-level technicians.
- - Prepare and operate machines during trial runs. ...
Be an early applicant!
Posted
22 days ago
MYR2,800 - MYR5,000 Per Month
- Set up, operate, and monitor CNC Milling machines to produce precision parts.
- Read and interpret technical drawings, blueprints, and work instructions.
- Select and install appropriate cutting tools, fixtures, and machine settings. ...
Be an early applicant!
Posted
11 days ago
MYR2,300 - MYR2,500 Per Month
- Job Description:
- • Create, edit, and optimize CNC programs (e.g., Mastercam)
- Non Exempt ...
Be an early applicant!
Posted
24 days ago
Internship For CNC Machinist
MYR2,500 - MYR3,000 Per Month
Fresh Graduates
Near Train Station
- Operate and maintain CNC machines. 操作及维护数控机床
- Ensure product quality and precision. 确保产品质量和精度
- Routine machine inspection & maintenance. 日常检查及保养 ...
Be an early applicant!
Posted
a day ago
Manufacturing Engineer (CNC Machining)
MYR4,000 - MYR7,000 Per Month
Sungai Seluang, Kedah
- Responsible for selecting and maintaining best material combinations to maximize quality and optimize manufacturing cost and efficiency.
- Analyze data and use all available resources to maintain product performance and meet quality objectives.
- Recommends manufacturing line equipment and fixtures based performing product process flow and time standards analysis studies ...
Posted
a day ago
MYR2,800 - MYR5,000 Per Month
- Set up, operate, and monitor CNC Milling machines to produce precision components according to engineering drawings and specifications.
- Read and interpret technical drawings, blueprints, and work instructions.
- Select and install appropriate cutting tools, fixtures, and machine settings. ...
Be an early applicant!
Posted
11 days ago
Senior/Junior CNC Machinist (3/5 Axis Milling, Lathe, Wirecut)/ Junior Grinding Machinist
Undisclosed
Fresh Graduates
- 5 axis CNC Milling/ 3-axis CNC Milling
- · Independently setup a 5 axis CNC milling/ 3-axis CNC Milling machine for high precision part manufacturing.
- · Run a CNC 5 axis CNC milling machine with +/-0.01mm precision. ...
Posted
7 days ago
Chat Available
Precision Machining Machine Tool Technician
MYR3,000 - MYR5,500 Per Month
- Install, commission, and perform test runs on precision machining equipment.
- Set machining parameters including spindle speed, feed rate, cutting depth, and tooling configurations.
- Conduct first-piece machining trials and verify dimensions, tolerances, and surface quality. ...
Posted
a day ago
Chat Available
CNC Technician - Mandarin
MYR3,500 - MYR5,000 Per Month
- Install, commission, debug, and perform trial runs of CNC machines to ensure production and precision requirements are met.
- Set machining parameters such as spindle speed, feed rate, and cutting depth according to technical drawings and process requirements.
- Conduct first-piece inspections and coordinate with quality inspectors to verify dimensions, tolerances, and surface finish. ...
Be an early applicant!
Posted
a day ago
Chat Available
SGD1,800 - SGD2,600 Per Month
Singapore, Singapore
- • Independently set up and operate CNC milling and turning centres• Select suitable cutting tools, speeds, and feeds for various materials, including stainless steel, titanium, and high-strength alloys• Continuously optimise CNC programs to reduce cycle time, improve surface finish, and extend tool life• Read and interpret technical drawings, specifications, and part requirements accurately
Posted
2 days ago
MYR3,000 - MYR5,500 Per Month
- Operate and set up CNC machines, lathe machines, and other machining equipment.
- Read and interpret technical drawings, blueprints, and specifications.
- Perform machining, cutting, drilling, milling, and fabrication work according to requirements. ...
Posted
2 days ago
Chat Available
MYR1,500 - MYR3,000 Per Month
+Additional Compensation
Fresh Graduates
- Provide technical assistance for machinery and equipment.
- Operate and monitor machines according to specifications.
- Ensure products meet quality standards through inspection and testing. ...
Posted
a month ago
MYR2,200 - MYR4,500 monthly
+Additional Compensation
Fresh Graduates
- Operate and set up Wire EDM/ Surface Grinding/ CNC Milling/ CNC Lathe machines.
- Interpret technical drawings, GD&T requirements, and machining instructions.
- Perform precision machining to meet tight tolerances and quality specifications. ...
Be an early applicant!
Posted
a day ago
Machinist (Cnc 3 Axis / Wire Cut)
MYR2,000 - MYR3,000 Per Month
Fresh Graduates
- To prepare and operate manual & semi-auto machines e.g. milling & grinding machines and CNC machines e.g. CNC multi-axis, Wire Cut & EDM machines.
- To set up machines to complete full cycles to fabricate large number of parts.
- To perform manual tapping and buffing of parts if required. ...
Posted
5 days ago
MYR2,200 - MYR4,500 monthly
+Additional Compensation
Fresh Graduates
- Operate and set up Wire EDM/ Surface Grinding/ CNC Milling/ CNC Lathe machines.
- Interpret technical drawings, GD&T requirements, and machining instructions.
- Perform precision machining to meet tight tolerances and quality specifications. ...
Be an early applicant!
Posted
8 days ago
Undisclosed
Fresh Graduates
- 5 axis CNC Milling/ 3-axis CNC Milling
- · Independently setup a 5 axis CNC milling/ 3-axis CNC Milling machine for high precision part manufacturing.
- · Run a CNC 5 axis CNC milling machine with +/-0.01mm precision. ...
Posted
a month ago
MYR2,200 - MYR4,500 Per Month
+Additional Compensation
Fresh Graduates
- Operate and set up Wire EDM/ Surface Grinding/ CNC Milling/ CNC Lathe machines.
- Interpret technical drawings, GD&T requirements, and machining instructions.
- Perform precision machining to meet tight tolerances and quality specifications. ...
Be an early applicant!
Posted
8 days ago
MYR2,200 - MYR4,500 Per Month
+Additional Compensation
Fresh Graduates
- Operate and set up Wire EDM/ Surface Grinding/ CNC Milling/ CNC Lathe machines.
- Interpret technical drawings, GD&T requirements, and machining instructions.
- Perform precision machining to meet tight tolerances and quality specifications. ...
Be an early applicant!
Posted
8 days ago
MYR1,800 - MYR3,000 Per Month
Fresh Graduates
- - Menyediakan dan melaras mesin CNC milling dan turning mengikut prosedur, program serta lukisan kejuruteraan untuk menghasilkan komponen mesin.
- - Membuat setup mesin CNC untuk juruteknik CNC peringkat junior.
- - Menyediakan dan mengendalikan mesin semasa trial run. ...
Be an early applicant!
Posted
22 days ago
MYR2,500 - MYR4,000 monthly
- - Set up and adjust CNC milling and turning machines according to procedures, programs, and engineering drawings to produce machine components.
- - Perform CNC machine setup for junior-level technicians.
- - Prepare and operate machines during trial runs. ...
Be an early applicant!
Posted
22 days ago
MYR1,800 - MYR3,000 Per Month
Fresh Graduates
- - Menyediakan dan melaras mesin CNC milling dan turning mengikut prosedur, program serta lukisan kejuruteraan untuk menghasilkan komponen mesin.
- - Membuat setup mesin CNC untuk juruteknik CNC peringkat junior.
- - Menyediakan dan mengendalikan mesin semasa trial run. ...
Be an early applicant!
Posted
22 days ago
Undisclosed
Fresh Graduates
- 5 axis CNC Milling/ 3-axis CNC Milling
- · Independently setup a 5 axis CNC milling/ 3-axis CNC Milling machine for high precision part manufacturing.
- · Run a CNC 5 axis CNC milling machine with +/-0.01mm precision. ...
Posted
a month ago
MYR2,200 - MYR4,500 monthly
+Additional Compensation
Fresh Graduates
- Operate and set up Wire EDM/ Surface Grinding/ CNC Milling/ CNC Lathe machines.
- Interpret technical drawings, GD&T requirements, and machining instructions.
- Perform precision machining to meet tight tolerances and quality specifications. ...
Be an early applicant!
Posted
8 days ago
MYR2,200 - MYR4,500 Per Month
+Additional Compensation
Fresh Graduates
- Operate and set up Wire EDM/ Surface Grinding/ CNC Milling/ CNC Lathe machines.
- Interpret technical drawings, GD&T requirements, and machining instructions.
- Perform precision machining to meet tight tolerances and quality specifications. ...
Be an early applicant!
Posted
8 days ago
MYR2,200 - MYR4,500 Per Month
+Additional Compensation
Fresh Graduates
- Operate and set up Wire EDM/ Surface Grinding/ CNC Milling/ CNC Lathe machines.
- Interpret technical drawings, GD&T requirements, and machining instructions.
- Perform precision machining to meet tight tolerances and quality specifications. ...
Be an early applicant!
Posted
8 days ago
MYR2,200 - MYR4,500 Per Month
+Additional Compensation
Fresh Graduates
- Operate and set up Wire EDM/ Surface Grinding/ CNC Milling/ CNC Lathe machines.
- Interpret technical drawings, GD&T requirements, and machining instructions.
- Perform precision machining to meet tight tolerances and quality specifications. ...
Be an early applicant!
Posted
8 days ago
MYR2,200 - MYR4,500 Per Month
+Additional Compensation
Fresh Graduates
- Operate and set up Wire EDM/ Surface Grinding/ CNC Milling/ CNC Lathe machines.
- Interpret technical drawings, GD&T requirements, and machining instructions.
- Perform precision machining to meet tight tolerances and quality specifications. ...
Be an early applicant!
Posted
8 days ago
MYR2,200 - MYR4,500 monthly
+Additional Compensation
Fresh Graduates
- Operate and set up Wire EDM/ Surface Grinding/ CNC Milling/ CNC Lathe machines.
- Interpret technical drawings, GD&T requirements, and machining instructions.
- Perform precision machining to meet tight tolerances and quality specifications. ...
Be an early applicant!
Posted
8 days ago
MYR2,200 - MYR4,500 Per Month
+Additional Compensation
Fresh Graduates
- Operate and set up Wire EDM/ Surface Grinding/ CNC Milling/ CNC Lathe machines.
- Interpret technical drawings, GD&T requirements, and machining instructions.
- Perform precision machining to meet tight tolerances and quality specifications. ...
Be an early applicant!
Posted
8 days ago