600+ Manufacturing Process Engineer Jobs in Malaysia | Job Vacancies | October 2026 | Maukerja
Showing 652 jobs results for
"manufacturing process engineer"
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
2 months ago
MYR2,000 - MYR3,500 Per Month
+Additional Compensation
Solok Rishah 3, 30100
- Oversee daily production operations to ensure efficiency and quality.
- Develop production plans and schedules to meet demand.
- Monitor production processes, identify bottlenecks, and implement solutions for improvement. ...
Be an early applicant!
Posted
10 days ago
MYR4,500 - MYR7,000 Per Month
- Develop, monitor, and improve manufacturing processes within clean room environments.
- Ensure compliance with clean room protocols, safety standards, and quality requirements.
- Analyze production/process issues and implement corrective and preventive actions ...
Posted
24 days ago
Undisclosed
- Optimization on metal work machine production flow and output.
- To review the new drawing metal work fabrication capabilities and provide the process flow, BOM, estimate production lead time for MES BOO & BOM.
- Establish WI for process plan, process WI and machine operation/set-up procedure for Metal Work processes. ...
Be an early applicant!
Posted
a month ago
MYR2,000 - MYR3,500 Per Month
+Additional Compensation
Solok Rishah 3, 30100
- Oversee daily production operations to ensure efficiency and quality.
- Develop production plans and schedules to meet demand.
- Monitor production processes, identify bottlenecks, and implement solutions for improvement. ...
Posted
10 days ago
MYR3,500 - MYR4,500 Per Month
Fresh Graduates
- Technical Specifications & Nesting- Review engineering drawing using AutoCAD to catch and resolve design discrepancies before they flow to the shop floor.- Perform raw material nesting using specialized software tools to maximize steel plate utilization and minimize scrap waste.
- Cost & Weight Verification - Conduct technical calculations manually or by using automation tools (such as Python scripts) to accurately determine structural weight, production cost, and material usage requirements. - Verify estimated manufacturing run times against actual workshop capacities to establish predictable project cost models.
- Raw Material Planning- Monitor stock levels of steel plates and other essential raw materials, initiating timely restocking to prevent production bottlenecks. - Prepare, verify, and submit accurate material requisitions based on incoming fabrication project requirements. ...
Posted
24 days ago
MYR8,000 - MYR8,001 Per Month
Near Train Station
- Interpret client drawings, specifications, and technical requirements into manufacturing plans
- Develop and optimize processes (forging, heat treatment, machining, finishing)
- Establish routing, work instructions, and process documentation ...
Strong problem-solving in production and manufacturing challenges
Ability to interpret engineering drawings and specifications accurately
+17
Posted
a month ago
Undisclosed
- Monitor day-to-day inspection operations on vendors supplied products.
- To liaise with the incoming inspection team and buyer on supplier quality issues.
- Supplier quality performance monitoring, evaluation & drive for improvement. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Monitor day-to-day inspection operations on vendors supplied products.
- To liaise with the incoming inspection team and buyer on supplier quality issues.
- Supplier quality performance monitoring, evaluation & drive for improvement. ...
Be an early applicant!
Posted
a month ago
MYR1,900 - MYR3,500 Per Month
Petaling, WP Kuala Lumpur
Near Train Station
- Assemble aerospace components and parts according to work instructions.
- Perform basic inspections to ensure assembled parts meet quality standards.
- Maintain a clean, organised, and safe working area. ...
Posted
a month ago
MYR8,000 - MYR15,000 Per Month
- Lead the process design and optimization of water treatment systems, specialty gas supply systems and chemical delivery systems, formulate technical schemes, process flows and equipment selection standards;
- Responsible for semiconductor/ pharmaceutic project process systems (including UPW, Wastewater treatment, special gas and chemical distribution) calculation and drawings based on project criteria and client/national codes;
- Manage the process team in project implementation, review design drawings, technical parameters and construction schemes, and solve key process problems in system commissioning and operation; ...
Be an early applicant!
Posted
a day ago
MYR3,000 - MYR5,000 Per Month
+Additional Compensation
Fresh Graduates
Puchong, 47130
- Key Responsibilities / 主要职责
- Process Development / 工艺开发
- Develop and establish manufacturing processes for aerospace equipment and precision parts. 制定航空航天设备及精密零件的制造工艺。 ...
Posted
a month ago
Undisclosed
- Write, review and maintain Engineering Change Management (ECM) documentation and work instructions.
- Ensure documentation compliance with IPC/WHMA-A-620 and ISO 9001 requirements.
- Responsible for developing safe, efficient and cost-effective manufacturing processes and procedures. ...
Be an early applicant!
Posted
14 days ago
Undisclosed
- To monitor daily quality inspection on parts received, ensure specification & process requirements are met.
- Area of coverage may include vendor incoming raw material inspection, set-up buy-off, in-process inspection, out-going inspection.
- Monitor tools and equipment condition, QA room temperature and humidity tracking. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Write, review and maintain Engineering Change Management (ECM) documentation and work instructions.
- Ensure documentation compliance with IPC/WHMA-A-620 and ISO 9001 requirements.
- Responsible for developing safe, efficient and cost-effective manufacturing processes and procedures. ...
Posted
14 days ago
Undisclosed
- Write, review and maintain Engineering Change Management (ECM) documentation and work instructions.
- Ensure documentation compliance with IPC/WHMA-A-620 and ISO 9001 requirements.
- Responsible for developing safe, efficient and cost-effective manufacturing processes and procedures. ...
Posted
14 days ago
Undisclosed
- Write, review and maintain Engineering Change Management (ECM) documentation and work instructions.
- Ensure documentation compliance with IPC/WHMA-A-620 and ISO 9001 requirements.
- Responsible for developing safe, efficient and cost-effective manufacturing processes and procedures. ...
Posted
14 days ago
Undisclosed
- Write, review and maintain Engineering Change Management (ECM) documentation and work instructions.
- Ensure documentation compliance with IPC/WHMA-A-620 and ISO 9001 requirements.
- Responsible for developing safe, efficient and cost-effective manufacturing processes and procedures. ...
Posted
14 days ago
Undisclosed
- Write, review and maintain Engineering Change Management (ECM) documentation and work instructions.
- Ensure documentation compliance with IPC/WHMA-A-620 and ISO 9001 requirements.
- Responsible for developing safe, efficient and cost-effective manufacturing processes and procedures. ...
Posted
14 days ago
Undisclosed
- Write, review and maintain Engineering Change Management (ECM) documentation and work instructions.
- Ensure documentation compliance with IPC/WHMA-A-620 and ISO 9001 requirements.
- Responsible for developing safe, efficient and cost-effective manufacturing processes and procedures. ...
Posted
14 days ago
Undisclosed
- Write, review and maintain Engineering Change Management (ECM) documentation and work instructions.
- Ensure documentation compliance with IPC/WHMA-A-620 and ISO 9001 requirements.
- Responsible for developing safe, efficient and cost-effective manufacturing processes and procedures. ...
Posted
14 days ago
Undisclosed
- Write, review and maintain Engineering Change Management (ECM) documentation and work instructions.
- Ensure documentation compliance with IPC/WHMA-A-620 and ISO 9001 requirements.
- Responsible for developing safe, efficient and cost-effective manufacturing processes and procedures. ...
Posted
14 days ago
Undisclosed
- Write, review and maintain Engineering Change Management (ECM) documentation and work instructions.
- Ensure documentation compliance with IPC/WHMA-A-620 and ISO 9001 requirements.
- Responsible for developing safe, efficient and cost-effective manufacturing processes and procedures. ...
Posted
14 days ago
Undisclosed
- Write, review and maintain Engineering Change Management (ECM) documentation and work instructions.
- Ensure documentation compliance with IPC/WHMA-A-620 and ISO 9001 requirements.
- Responsible for developing safe, efficient and cost-effective manufacturing processes and procedures. ...
Posted
14 days ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Be an early applicant!
Posted
2 months ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
2 months ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
2 months ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
2 months ago
Undisclosed
- Hand on setup the equipment and process during engineering activities such as engineering evaluations.
- Evaluation report compilation and initial data analysis.
- Support Yield & Quality KPI improvement. ...
Posted
2 months ago
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Posted
2 months ago