400+ Machinist Jobs in Malaysia | Job Vacancies | October 2026 | Maukerja
Showing 453 jobs results for
"machinist"
Machinist (Cnc 3 Axis / Wire Cut)
MYR2,000 - MYR3,000 Per Month
Fresh Graduates
- To prepare and operate manual & semi-auto machines e.g. milling & grinding machines and CNC machines e.g. CNC multi-axis, Wire Cut & EDM machines.
- To set up machines to complete full cycles to fabricate large number of parts.
- To perform manual tapping and buffing of parts if required. ...
Be an early applicant!
Posted
3 days ago
MYR3,500 - MYR4,500 Per Month
- - Independently set up, operate, and monitor CNC milling and turning machines to produce precision components.
- - Read and interpret engineering drawings, blueprints, and technical specifications to ensure accurate machining operations.
- - Prepare machine setups, select suitable cutting tools, and adjust fixtures, tool offsets, and machining parameters. ...
Be an early applicant!
Posted
17 hours ago
CNC Trainee / Junior CNC Machinist
MYR2,500 - MYR3,000 Per Month
Fresh Graduates
- - Assist in operating CNC milling and turning machines under the supervision of experienced machinists.
- - Learn to set up CNC machines, load materials, and prepare tools for machining operations.
- - Assist in reading and interpreting basic engineering drawings and machining specifications. ...
Be an early applicant!
Posted
17 hours ago
MYR3,000 - MYR5,000 Per Month
Fresh Graduates
- Set up CNC mills, lathes, or multi-axis machines with minimal supervision according to Work Instructions and Tooling List.
- Install, setup and adjust tooling offset, setup fixtures, work holding, and machine offsets.
- Meet daily production targets with consistent part quality. ...
Posted
2 months ago
MYR2,500 - MYR4,500 Per Month
Fresh Graduates
Near Train Station
- Have operate CNC milling mahcine
- Set up and teaching CNC machine
- CNC programming ...
Posted
16 days ago
MYR2,000 - MYR5,000 Per Month
Fresh Graduates
- Job Scope:-
- Develop, create, and modify CNC programs for milling machines, lathes, routers, and other CNC machining equipment according to production requirements
- Read, interpret, and analyse engineering drawings, technical blueprints, and tolerances ...
Be an early applicant!
Posted
7 days ago
CNC Machinist Group Leader
Undisclosed
- Assign daily tasks to team members based on production schedules
- Monitor machine output and workflow to hit production targets
- Track job progress and report delays to the production manager ...
Be an early applicant!
Posted
2 months ago
CNC Lathe Machinist
MYR2,000 - MYR3,500 Per Month
Near Train Station
- Operate and maintain CNC lathe machines to produce high-quality parts according to specifications and blueprints.
- Set up, calibrate, and troubleshoot CNC lathe machines, including loading programs, selecting appropriate tooling, and adjusting machine parameters.
- Read and interpret technical drawings, blueprints, and schematics to ensure accurate machining of parts. ...
Posted
15 days ago
MYR2,000 - MYR2,400 Per Month
- Set up and operate manual surface grinders (brand Okamoto) from the process of wheels selection, fixture and parameter to the grinding process.
- Independently operate grinding machine to grind any metal workpieces to drawing specifications in term of dimension & appearance while ensure high-quality outcome. Tolerance of the part up to 0.002mm.
- Develop and refine grinding parameters to improve cycle time and surface quality. Collaborate with NPI engineer on new product introductions. ...
Be an early applicant!
Posted
2 months ago
MYR2,000 - MYR3,000 Per Month
Fresh Graduates
KL City, WP Kuala Lumpur
Near Train Station
- Set up and operate CNC machines according to drawings, specifications and work instructions.
- Perform machining work to achieve the required dimensions, tolerances and surface finish.
- Read and interpret engineering drawings, technical drawings and machining requirements. ...
Posted
a month ago
MYR2,500 - MYR3,500 Per Month
- Set up and operate CNC milling and/or turning machines.
- Process automation products using aluminium and plastic materials.
- Read and interpret engineering drawings. ...
Posted
19 days ago
MYR2,800 - MYR6,000 Per Month
Near Train Station
- Set up and operate CNC Milling, Turning, and other machines.
- Ensure all parts meet strict quality standards and client specifications.
- Perform machine calibration, routine maintenance, and tool changes. ...
Posted
a month ago
MYR2,000 - MYR4,000 Per Month
Near Train Station
- To manage 5S activity in the department.
- To create programs for CNC Machining according to drawing given.
- Work closely with Engineering & Quality Assurance Department to enhance the quality & productivity. ...
Be an early applicant!
Posted
a month ago
MYR2,000 - MYR4,000 Per Month
Near Train Station
- To manage 5S activity in the department.
- To create programs for CNC Machining according to drawing given.
- Work closely with Engineering & Quality Assurance Department to enhance the quality & productivity. ...
Be an early applicant!
Posted
a month ago
MYR2,000 - MYR3,000 Per Month
- Independently setup a 5 axis CNC milling machine for high precision part manufacturing.
- Run a CNC 5 axis CNC milling machine with +/-0.01mm precision.
- Perform in process quality control to confirm own parts production. ...
Posted
a month ago
MYR1,500 - MYR3,500 Per Month
+Additional Compensation
Fresh Graduates
- CNC machining and debugging of products, editing of machining processes and programs, and first-piece self-inspection.
- Optimization and improvement of production processes.
- Procurement and management of tooling, cutters, clamps, and jigs. ...
Be an early applicant!
Posted
a day ago
MYR2,800 - MYR3,500 Per Month
Fresh Graduates
- * Operate and Setup CNC Milling or Turning machine according to standard operating procedure.
- * Follow Setup Sheet instruction to setup machine.
- * Ensure goods produced meet to the quality requirement as stated in customer specifications. ...
Posted
a month ago
MYR1,700 - MYR2,200 Per Month
- To operate machinery centres in accordance with process instructions.
- To perform machinery setup, cutting processes, part de-burring, and sequence inspection of produced parts.
- To monitor, maintain, and ensure that machinery, tools, fixtures, and inspection equipment are in good condition. ...
Posted
a month ago
MYR2,000 - MYR5,000 Per Month
Fresh Graduates
- Job Scope:-
- Develop, create, and modify CNC programs for milling machines, lathes, routers, and other CNC machining equipment according to production requirements
- Read, interpret, and analyse engineering drawings, technical blueprints, and tolerances ...
Be an early applicant!
Posted
7 days ago
Up to MYR3,000 Per Month
- Operate CNC machines and CNC routers according to production requirements.
- Set up machines and prepare materials for machining operations.
- Read and follow technical drawings, specifications and work instructions. ...
Be an early applicant!
Posted
7 days ago
MYR2,000 - MYR4,000 Per Month
Near Train Station
- To manage 5S activity in the department.
- To create programs for CNC Machining according to drawing given.
- Work closely with Engineering & Quality Assurance Department to enhance the quality & productivity. ...
Be an early applicant!
Posted
a month ago
MYR2,000 - MYR4,000 Per Month
Near Train Station
- To manage 5S activity in the department.
- To create programs for CNC Machining according to drawing given.
- Work closely with Engineering & Quality Assurance Department to enhance the quality & productivity. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Run the machine according to plan.
- Perform preventive maintenance according to plan.
- Inspect product and inform Leader / Superior on product quality issues. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Run the machine according to plan.
- Perform preventive maintenance according to plan.
- Inspect product and inform Leader / Superior on product quality issues. ...
Be an early applicant!
Posted
a month ago
MYR2,200 - MYR3,000 Per Month
- • Perform machining operations in accordance to work instructions
- • Observe machine operation to detect malfunctions or out-of-tolerance
- machining and make the necessary adjustments to correct the fault or ...
Posted
2 months ago
MYR3,500 - MYR5,000 Per Month
- Operate CNC turning machines to manufacture precision parts and components according to specifications
- Set up, program, and monitor CNC machines to ensure optimal performance and productivity
- Perform routine maintenance and troubleshooting on CNC machines to maintain their optimal condition ...
Posted
3 months ago
MYR2,000 - MYR4,000 Per Month
Near Train Station
- To manage 5S activity in the department.
- To create programs for CNC Machining according to drawing given.
- Work closely with Engineering & Quality Assurance Department to enhance the quality & productivity. ...
Be an early applicant!
Posted
a month ago
MYR2,000 - MYR4,000 Per Month
Near Train Station
- To manage 5S activity in the department.
- To create programs for CNC Machining according to drawing given.
- Work closely with Engineering & Quality Assurance Department to enhance the quality & productivity. ...
Be an early applicant!
Posted
a month ago
MYR3,500 - MYR5,500 Per Month
+Additional Compensation
Near Train Station
- Interpret engineering drawings, CAD data, and tooling specifications
- Manufacture, assemble and adjust stamping dies and tooling components
- Perform preventive maintenance and tool repair ...
Be an early applicant!
Posted
2 days ago
MYR800 - MYR1,300 Per Month
Fresh Graduates
Near Train Station
- Assist in setting up and operating CNC machines under supervisor guidance
- Follow work orders and technical drawings to support precision machining tasks
- Perform routine checks and inspections of machine functionality and workpieces ...
Posted
a month ago