Strictly implement the company's production safety system and various rules and regulations

Familiar with raw material\semi-finished product\finished product inspection process and inspection standards and methods

Familiar with defective production points and inspection methods in the product manufacturing process ...

Inspection

Work Specification Review

Progress Monitoring ...

Responsibilities:  Perform all kinds of inspection activities (eg. receiving, in-process, final, FAI, jigs & fixtures inspection).  Perform sorting/screening whenever necessary.  Perform preventive maintenance for measurement equipment as necessary.  Support calibration and GR&R activity whenever necessary.  Compile inspection report for all kinds of inspection activities including First Article (FAIR), Mass Production (MP), Jigs/Fixtures and Failure Analysis.  Attend scheduled training whenever necessary.  Communicate with all areas of operations.  Generate bubble drawing whenever necessary. Requirements:  Ability to operate basic hand-held measurement equipment (eg. caliper, micrometer, pin gauge, height gauge etc).  Ability to perform all kinds of inspection activities (eg. receiving, in-process, final, FAI, jigs & fixtures inspection).  Ability to operate CMM and Vision Measurement System (Smartscope) would be added advantage.  Read and write basic English.  Able to perform basic mathematics calculations.  Able to read and understand customer drawing and specifications  Able to interpret basic GD&T.

JOB DUTIES:

Perform dally inspection on parts and product quality - testing and performing check including recording of result

Dealing with internal team on quality issue and raise internal rejection report and updating the status into system for engineers action ...

Graduate Diploma

With quality inspection in incoming,IPQC and outgoing process.

Training and guidance will be provided

1. Education : Diploma in Mechanical Engineering. 2. Computer competency. 3. Understanding mechanical drawings. 4. Using measuring instruments. 5. Responsible for the outgoing inspection of finished products. 6. Preparing FAI document. 7. Prepare and maintain all inspection records.

HANTONG METAL COMPONENT (PENANG) SDN. BHD seeks a QA Inspector • Establishing quality standards for products a company produces • To ensure that operations meet production standards • Recommending any necessary adjustments and changes to production processes • Inspecting and testing the materials and equipment produced by a company • Using gadgets such as micrometer screw gauges to measure products • Removing products that don’t meet production standards and recommending strategies to improve product quality • Accepting or rejecting finished products and discussing inspection results with the production team • Performing inspections at random to assess product quality

QA Inspector may perform the following tasks:

Doing inspection according SOP and WI.

To assist production on the quality aspect. ...

RESPONSIBILITY: • To setup and trouble shoot on plastic injection molding, ability to test new moulds. • Strong technical background in plastic moulding manufacturing environment. • To carry out mold changing by following production schedule. • Maintain and improve targeted quality, yield and cycle time of all injection- moulding machine. Analyze and rectify problems encountered during operation. • Ensure the smooth running of production in the absence of the Production Supervisor. • Control and maintain tools, equipment and machinery in the production ro Report of any damages, breakdown or losses of machinery and equipment’s to the Assist. General Manager and/or the Directors.om. • Daily, weekly and/or monthly checking on all the machines, equipment’s, utilities and facilities the company. • Transfer and/or Shifting of Machines, Equipment’s as assigned by Superiors. • To repair and/on fabricate simple tools and jigs for the company.

General Position Summary: • Responsible for performing the required CQA inspections on module/board/system level assemblies with the overall processing emphasis placed on quality and continuous improvement Authority Statement: • Authority to perform all applicable CQA processes Primary Functions/Major Responsibilities: • Performs inspection on incoming materials against IPC standards and incoming specification • Performs required TEST inspection and VISUAL inspection on all product processed by Plexus • Verifies product conformity against process and product documentation • Reporting quality issues in production • Provide training and guidance to new QA inspector Supervisory Responsibility: • Nil Specific Job Skills: • Detail oriented and meticulous • Basic typing and computer skills • Good interpersonal and communication skills Education and/or Experience: • Minimum SPM, SKM Level 2 or 3 or equivalent

Looking for candidates available to work:

Monday: Morning, Afternoon, Evening

Tuesday: Morning, Afternoon, Evening ...

1. To carry out daily activities as per assigned by superior.

2. To practice good personal hygiene before carried out the inspection.

3. To ensure compliance to the requirements of ISO 9001, FSSC 22000, GMP, HACCP and Halal applicable to regulatory requirements. ...

Consumer goods inspectors evaluate assembled parts of consumer goods and products for compliance with specifications and defects in-line with clients' requirements and organisational policies. Consumer goods inspectors provide results and findings for reports. Inspected defects can be identified as being cracks, scratches, errors in sanding, and defects of moving parts.

Job-Skills Integrator - Precision Engineering (JSIT-PE) Quality Assurance & Control (Manufacturing, Transport & Logistics) Walk in interview for selected candidates Come join the inaugural JSIT Precision Engineering Career Discovery Day on 19th April @ NYP! Happening from 12pm-7pm at Nanyang Polytechnic, Blk A, NYP Lounge, Level 3 180 Ang Mo Kio Avenue 8 Singapore (569830) Come explore a career in Precision Engineering and meet over 25 leading PE companies offering more than 200 job vacancies. Whether you are seeking employment or awaiting graduation, this event promises to be both fruitful and exciting! *Registration is required at the door. Only for Singaporeans. Job Description: Review and interpret engine manuals, illustrated parts manuals, and other technical data requirements to perform visual and dimensional inspections at receiving / preliminary, in-process, and final inspection. Accurately document inspection results. Comply with internal Quality Management System requirements. Interpret resolution of gauges required to perform dimensional inspections. Use a variety of precision measuring instruments such as indicators, verniers, OD & ID micrometers, pi-tapes, etc. Interpret drawings and instructions from operations sheets and complex blueprints, engine manuals, inspection records, inspection record method sheets, etc. Operation computerized measuring equipment. Develop knowledge of software programs and use judgment in setting up datum of CMM machine and surface plate. Selection of proper size probes and selection of proper programs of measurement, and perform tip calibrations before inspection of components. Detect faulty operations and materials and create NCR to document non-conformance or report these and other problems to a senior inspector or immediate Cell Leader. Identify and mark parts, as required, per approved technical data. Maintain good housekeeping practices on machines and in work area. Wear necessary personal protective equipment (PPE) as required. Comply with all company and safety rules and regulations during course of duties. Job Requirement: Able to perform rotating day and night shift Able to work in Changi North Crescent / Loyang Lane Proficient with various measuring instruments such as indicators, verniers, OD&ID micrometers, pi-tapes, etc. Understand GD&T requirements and ability to read and interpret complex blueprints and technical documents. Company information

Registration No. T08GB0032G Your application will include the following questions: Which of the following statements best describes your right to work in Singapore? Report this job advert

Don’t provide your bank or credit card details when applying for jobs. What can I earn as a Quality Assurance Inspector ...

ROLE AND RESPONSIBILITIES:

Track quality trends and provide feedback on abnormal line fallout and work closely with Engineering, Production on process improvement.

Interact and update customer for any special quality issue, evaluation or Failure Analysis. ...

Looking for candidates available to work:

Monday: Morning

Tuesday: Morning ...

Walk in interview - Kilang Farmaseutikal (

Kilang Ubat

) di Meru, Klang Selangor ...

Perform regular quality assessments on all incoming materials from vendors and outgoing products for shipping

Measure product dimensions, examine functionality, and compare the final product to the specifications

Recommend improvements to the production process to ensure quality control ...

Roles & Responsibilities

In-process inspection of part

Use of basic equipment, profile projector, micrometer, vernier caliper & high gauge ...

Bachelor Degree in Food or any equivalent.

Willing to work night shift (4-12pm)

Memeriksa kemasukan bahan berdasarkan kepada spesifikasi bahan mentah, bahan pembungkusan & OPP. ...

Ensuring that our products consistently meet the stringent quality standards expected by our customers. Your dedication to excellence, attention to detail, and collaborative spirit will contribute to our ongoing success in delivering superior products that exceed customer expectations.

QC Inspector Duties:

Conduct 1st off approvals and in-process inspections

Perform final QA release on all Pharma jobs and other customers requiring certificates of conformance and addressing "problem" jobs as directed by QA Manager ...

1) To label “ON HOLD” or “QC REJECT” for on hold or rejected raw, sub material, work in process, and finished goods 2) To supervise IQC, IPQC, and OGQA. 3) To train all QC personnel on the respective incoming, in-process, and outgoing inspections as per work instruction, quality requirements, and training needs. 4) To liaise with customers, suppliers, and internal personnel on quality issues. 5) To arrange for sorting or rework at the customer’s place if any. 6) To ensure all approved samples are according to the specification. 7) To issue NCR and CAR on non-conformance to related departments. 8) To follow –up and verify corrective action taken by the respective departmental personnel in regard to minimizing or diminishing the quality problem. 9) To ensure incoming, in-process, and outgoing inspections are implemented as per procedures and Work Instruction (WI). 10) To arrange for raw material and final products laboratory testing. 11) To ensure that all NCR and CAR issued to internal departments and ICDR issued to suppliers are closed within a specified time frame. 12) To provide product quality information to production on daily basis. 13) To ensure all testing equipment in the laboratory is in good condition. 14) Can working shift or night shift is preferable

Fresh graduate are encouraged to apply.

1) Perform daily QC Inspection activities including in-coming, in-process and

out-going inspection ...