2,900+ Quality Engineer Jobs in Malaysia | Job Vacancies | September 2026 | Maukerja

Showing 2,912 jobs results for "quality engineer"
Never miss any updates for Quality Engineer jobs
MYR8,000 - MYR10,000 Per Month
  • Prepare, review, and control welding procedures and qualification records.
  • Manage welding parameters, materials, consumables, and process requirements.
  • Monitor fabrication work to ensure welding is carried out according to approved procedures. ...
AWS Certified Welding Inspector orbital welding
+4
Posted
17 days ago
MYR8,000 - MYR8,001 Per Month
Near Train Station
  • Interpret client drawings, specifications, and technical requirements into manufacturing plans
  • Develop and optimize processes (forging, heat treatment, machining, finishing)
  • Establish routing, work instructions, and process documentation ...
Strong problem-solving in production and manufacturing challenges Ability to interpret engineering drawings and specifications accurately
+17
Posted
11 days ago
MYR8,000 - MYR12,000 Per Month
  • Job Responsibilities:
  • Responsibility 1: Assist the System Team in developing Customer Quality Management System process standards;
  • 1) Collaborate with the System Team to finalize the Customer Quality Management System process standards; ...

Be an early applicant!

Posted
24 days ago
MYR2,000 - MYR3,000 Per Month
Fresh Graduates
Near Train Station
  • Assist in testing and commissioning activities at factory and site locations.
  • Perform continuity, point-to-point, I/O, functional, and basic electrical testing.
  • Assist in FAT and SAT preparation and testing activities. ...
Communication Teamwork
+3
Posted
19 days ago
premium banner
MYR1,700 - MYR3,500 Per Month
Near Train Station
  • Prioritize safety at all times.
  • Maintain strong overall quality control for all products handled by the company.
  • Inspect incoming goods according to the required specifications, including general quality, product finishing, weight, dimensions, packing, packaging, product labels, barcodes, and other relevant requirements. ...
Quality Assurance Inspection
+1
Posted
4 hours ago
MYR3,000 - MYR3,500 Per Month
  • Perform visual inspections on products and components.
  • Identify defects, abnormalities, or quality issues.
  • Ensure inspected products meet the required specifications. ...
Visual Inspection Quality Control
+1
Posted
13 days ago
MYR3,500 - MYR5,000 Per Month

KL City, WP Kuala Lumpur

Near Train Station
  • Conduct site inspections based on approved drawings, material specifications and company quality standards.
  • Prepare inspection reports, photographic records, defect lists and rectification follow-up reports.
  • Coordinate with contractors and the site team to close defects before handover. ...
Posted
18 days ago
Undisclosed

Sri Gading, Johor

  • Assist Technical Engineer in new product/sample preparation, trials, and external testing.
  • Conduct testing for process improvement, material evaluation, and product quality.
  • Monitor performance of critical orders and collect data for process control. ...

Be an early applicant!

Posted
a month ago
Undisclosed
Fresh Graduates
  • Assist in coordinating and supervising daily site activities.
  • Monitor construction progress to ensure work is carried out according to approved drawings, specifications, quality standards, and project schedule.
  • Coordinate with subcontractors, consultants, suppliers, and relevant authorities. ...
Posted
13 days ago
MYR2,000 - MYR3,500 Per Month
  • Menjalankan pemeriksaan kualiti bagi memastikan produk memenuhi piawaian dan spesifikasi syarikat.
  • Memantau kualiti produk sepanjang proses penerimaan, pemprosesan, pembungkusan dan penghantaran.
  • Mengenal pasti, melaporkan serta membuat susulan terhadap isu kualiti atau produk yang tidak memenuhi spesifikasi. ...
Quality Control Documentation
+1
Posted
2 months ago
MYR2,200 - MYR3,000 Per Month
  • • Handle and setup precision measuring and testing equipment against required standard.
  • • Read manufacturing blueprints and schematics for inspection requirements.
  • • Carry out quality inspection (incoming, in process and/or final inspection) activities. ...
Quality Assurance Inspection
+6
Posted
a month ago
MYR3,000 - MYR4,500 Per Month
  • Lead and coordinate product registration, notifications, and variations with the National Pharmaceutical Regulatory Agency (NPRA / KKM).
  • Prepare, review, and organize complete regulatory dossiers, including dossier submission, Certificate of Free Sale, ingredients validation, etc.
  • Stay up to date with Malaysia food and health supplement regulations, ensuring all raw materials, formulations, and labeling meet current NPRA and KKM requirements. ...
NPRA registration KKM compliance
+14
Posted
14 days ago
MYR1,700 - MYR2,000 Per Month
Fresh Graduates
Near Train Station
  • Perform quality inspections and testing on raw materials, in-process products, and finished goods to ensure they meet company standards.
  • Record, analyze, and maintain accurate quality control inspection reports and documentation.
  • Identify and report quality issues, non-conformities, and assist in implementing corrective and preventive actions. ...
Posted
a month ago
Undisclosed
Fresh Graduates
  • Inspection: Perform, physical, visual, or functional inspections on raw materials, components, and finished products.
  • Documentation: Document, report, and track inspection results, defects, and non-conformances.
  • Testing: Use measuring equipment such as calipers, micrometers, and gauges to verify specification. ...
Quality Inspection Attention to Detail
+3

Be an early applicant!

Posted
a month ago
premium banner
MYR2,300 - MYR4,000 Per Month
Near Train Station
  • Perform routine quality control testing of pharmaceutical products and raw materials.
  • Prepare samples and conduct laboratory tests according to SOPs.
  • Record test results and maintain proper documentation. ...
Sample Preparation Data Recording
+2
Posted
12 days ago
MYR500 - MYR1,000 Per Month
Fresh Graduates
Near Train Station
  • Assist the QC team in conducting quality inspections on raw materials, packaging materials, and finished products.
  • Assist in monitoring production processes to ensure compliance with company quality and food safety standards.
  • Support the QC team in conducting routine checks on product quality, hygiene, cleanliness, and production areas. ...
Quality Assurance Food Safety
+3
Posted
19 days ago
MYR3,000 - MYR3,500 Per Month
  • Perform visual inspections on products and components.
  • Identify defects, abnormalities, or quality issues.
  • Ensure inspected products meet the required specifications. ...
Visual Inspection Quality Control
+1
Posted
13 days ago
Undisclosed
  • Conduct assessment of vehicle condition (interior, exterior, odometer reading, trunk area, engine compartment).
  • Note damage, or repair to frame, paint, engine, AC/heater operation, radio, navigation system, tires, etc.
  • Provide accurate and complete documentation of overall vehicle condition; providing reports based on findings. ...
Posted
2 months ago
MYR1,700 - MYR2,500 Per Month
Fresh Graduates

Petaling, WP Kuala Lumpur

Near Train Station
  • SKM holders (preferably technical) / SPM with manufacturing experience
  • 1 Month FREE Training – Shah Alam
  • Allowance: RM1,700 + EPF, SOCSO & EIS ...
Posted
a month ago
Undisclosed
  • To monitor daily quality inspection on parts received, ensure specification & process requirements are met.
  • Area of coverage may include vendor incoming raw material inspection, set-up buy-off, in-process inspection, out-going inspection.
  • Monitor tools and equipment condition, QA room temperature and humidity tracking. ...

Be an early applicant!

Posted
7 days ago
High Opportunity
premium banner
MYR2,000 - MYR2,500 Per Month
  • Conduct incoming, in-process, and outgoing quality inspections.
  • Operate quality inspection equipment and accurately record inspection results.
  • Perform inspections according to established quality standards and procedures. ...
Quality Assurance Inspection
+1
Posted
a month ago
Undisclosed
  • Versatile Software Project Delivery (Core Responsibility):
  • Lead and execute a wide range of software initiatives end-to-end, from custom full-stack development to RPA, AI-driven systems, and agentic solutions. Own projects from problem definition and architecture through deployment and maintenance.
  • AI, Automation & Agentic Systems: Design and implement AI models, machine learning workflows, RPA solutions, and agentic architectures integrated into production environments. ...
Artificial Intelligence Machine Learning
+1
Posted
2 months ago
Undisclosed

Bidor, Perak

  • Inspect products to ensure they meet quality standards and guidelines.
  • Check product condition, size, appearance, and specifications.
  • Conduct basic measurements and quality tests. ...
Posted
a month ago
Undisclosed

Bidor, Perak

  • Product quality inspectors check products in order to assess their compliance in reference to a standard or reference guideline.
  • They observe, measure, test, and form questions in order to fill in forms and present levels of compliance with comments after the inspection process.
  • Product quality inspectors are employed or work externally for companies. ...
Posted
a month ago
premium banner
MYR3,500 - MYR5,000 Per Month
  • Perform incoming, in-process (IPQC), and final quality inspections.
  • Conduct quality checks to ensure products meet company standards.
  • Prepare inspection reports and maintain quality records. ...
Posted
7 days ago
MYR2,300 - MYR2,800 Per Month
+Additional Compensation
Fresh Graduates

Shah Alam, 40150

  • Develop and implement quality assurance policies and procedures.
  • Conduct regular inspections and audits of production processes and finished products.
  • Identify and document quality issues, and work with relevant teams to implement corrective actions. ...
Quality Control Process Improvement
+10
Posted
a month ago
Undisclosed
  • Serve as focal point of contact for customers on quality-related matters with minimal supervision.2. Ensure products meet customer specifications, drawings, and quality standards.3. Lead customer audits preparation, coordination, and follow-up on audit findings.4. Lead root cause analysis and corrective action implementation; ensure timely closure and effectiveness verification.5. Prepare and maintain quality documentation (Control Plan, Inspection Reports, FAI, PPAP documents where applicable).6. Monitor quality performance metrics and drive improvement actions based on data analysis.7. Identify process improvement opportunities and work with cross-functional teams to implement solutions.8. Provide technical guidance to QA Technicians on inspection methods and quality requirements.9. Participate in new product introduction (NPI), including pretest, first article inspection, and buyoff.10. Support QMS implementation, audit compliance, and continuous improvement initiatives.11. Handle internal non-conformance and support MRB activities.12. Ensure compliance to ISO standards, safety practices, SOP, and company policies.13. Mentor and coach E1 on quality standards and documentation best practices.

Be an early applicant!

Posted
7 days ago
MYR4,000 - MYR6,500 Per Month
  • Education: Diploma / Bachelor’s Degree in Civil Engineering or a related engineering discipline.
  • Experience:Minimum2 to 4 yearsof solid site experience in heavy civil infrastructure. A proven background working onroadworks, bridge construction, or major earthworks/railway alignment is required.
  • Technical Skills: ...
Civil Engineering Project Management
+5
Posted
18 days ago
MYR2,000 - MYR4,000 Per Month
Near Train Station
  • To manage 5S activity in the department.
  • To create programs for CNC Machining according to drawing given.
  • Work closely with Engineering & Quality Assurance Department to enhance the quality & productivity. ...
CNC Machining FANUC controllers
+3

Be an early applicant!

Posted
6 days ago
MYR2,000 - MYR4,000 Per Month
Near Train Station
  • To manage 5S activity in the department.
  • To create programs for CNC Machining according to drawing given.
  • Work closely with Engineering & Quality Assurance Department to enhance the quality & productivity. ...
CNC Machining FANUC controllers
+3

Be an early applicant!

Posted
6 days ago